Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 62a1cfa4 authored by Xiaowen Wu's avatar Xiaowen Wu
Browse files

ARM: dts: msm: create display devicetree file for adp star platform 



create and separate display related devicetree from sa8155 to adp star,
add new configuration for adp alcor devicetree.

Change-Id: I8a490a7c14c9bfa96a4862c39c6c17d5dca3ccc7
Signed-off-by: default avatarXiaowen Wu <wxiaowen@codeaurora.org>
parent 418baa2e

arch/arm64/boot/dts/qcom/sa8155-adp-alcor-display.dtsi

0 → 100644
+88 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2019, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&tlmm {

	dp_hpd_cfg_pins: dp_hpd_cfg_pins {

		mux {

			pins = "gpio48";

			function = "gpio";

		};

		config {

			pins = "gpio48";

			drive-strength = <2>;

			bias-pull-down;

		};

	};



	dp_redriver_en: dp_redriver_en {

		mux {

			pins = "gpio47";

			function = "gpio";

		};

		config {

			pins = "gpio47";

			drive-strength = <2>;

			bias-disable;

			output-high;

		};

	};

};



&sde_dp {

	qcom,ext-disp = <&ext_disp>;

	qcom,dp-hpd-gpio = <&tlmm 48 0>;

	pinctrl-names = "mdss_dp_active", "mdss_dp_sleep",

			"mdss_dp_hpd_active";

	pinctrl-0 = <&dp_hpd_cfg_pins &dp_redriver_en>;

	pinctrl-1 = <&dp_hpd_cfg_pins &dp_redriver_en>;

	pinctrl-2 = <&dp_hpd_cfg_pins &dp_redriver_en>;



	qcom,core-supply-entries {

		#address-cells = <1>;

		#size-cells = <0>;

		qcom,core-supply-entry@0 {

			reg = <0>;

			qcom,supply-name = "refgen";

			qcom,supply-min-voltage = <0>;

			qcom,supply-max-voltage = <0>;

			qcom,supply-enable-load = <0>;

			qcom,supply-disable-load = <0>;

		};

	};

};



&soc {

	refgen: refgen-regulator@88e7000 {

		compatible = "qcom,refgen-regulator";

		reg = <0x88e7000 0x60>;

		regulator-name = "refgen";

		regulator-enable-ramp-delay = <5>;

	};



	sde_wb: qcom,wb-display@0 {

		compatible = "qcom,wb-display";

		cell-index = <0>;

		label = "wb_display";

	};



	ext_disp: qcom,msm-ext-disp {

		compatible = "qcom,msm-ext-disp";



		ext_disp_audio_codec: qcom,msm-ext-disp-audio-codec-rx {

			compatible = "qcom,msm-ext-disp-audio-codec-rx";

		};

	};

};



&mdss_mdp {

	connectors = <&sde_rscc &sde_dp &sde_wb>;

};

arch/arm64/boot/dts/qcom/sa8155-adp-alcor-overlay.dts

+2 −1
Original line number Diff line number Diff line 
/* Copyright (c) 2018, The Linux Foundation. All rights reserved.

/* Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and
@@ -14,6 +14,7 @@ 
/plugin/;



#include "sa8155-adp-common.dtsi"

#include "sa8155-adp-alcor-display.dtsi"



/ {

	model = "ADP-ALCOR";

arch/arm64/boot/dts/qcom/sa8155-adp-alcor.dts

+2 −1
Original line number Diff line number Diff line 
/* Copyright (c) 2018, The Linux Foundation. All rights reserved.

/* Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and
@@ -14,6 +14,7 @@ 


#include "sa8155-v2.dtsi"

#include "sa8155-adp-common.dtsi"

#include "sa8155-adp-alcor-display.dtsi"



/ {

	model = "Qualcomm Technologies, Inc. SA8155 ADP ALCOR";

arch/arm64/boot/dts/qcom/sa8155-adp-star-display.dtsi

0 → 100644
+309 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2019, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



#include <dt-bindings/clock/mdss-10nm-pll-clk.h>



&tlmm {

	ioexp_intr_active: ioexp_intr_active {

		mux {

			pins = "gpio48";

			function = "gpio";

		};

		config {

			pins = "gpio48";

			drive-strength = <2>;

			bias-pull-up;

		};

	};



	ioexp_reset_active: ioexp_reset_active {

		mux {

			pins = "gpio30";

			function = "gpio";

		};

		config {

			pins = "gpio30";

			drive-strength = <2>;

			bias-disable;

			output-high;

		};

	};

};



&sde_dp {

	qcom,ext-disp = <&ext_disp>;

	qcom,dp-hpd-gpio = <&ioexp 8 0>;



	pinctrl-names = "mdss_dp_active", "mdss_dp_sleep";

	pinctrl-0 = <&dp_hpd_cfg_pins>;

	pinctrl-1 = <&dp_hpd_cfg_pins>;



	qcom,core-supply-entries {

		#address-cells = <1>;

		#size-cells = <0>;

		qcom,core-supply-entry@0 {

			reg = <0>;

			qcom,supply-name = "refgen";

			qcom,supply-min-voltage = <0>;

			qcom,supply-max-voltage = <0>;

			qcom,supply-enable-load = <0>;

			qcom,supply-disable-load = <0>;

		};

	};

};



&qupv3_se15_i2c {

	status = "ok";



	pinctrl-0 = <&qupv3_se15_i2c_active

		&ioexp_intr_active

		&ioexp_reset_active>;



	ioexp: gpio@3e {

		#gpio-cells = <2>;

		#interrupt-cells = <2>;

		compatible = "semtech,sx1509q";

		reg = <0x3e>;

		interrupt-parent = <&tlmm>;

		interrupts = <48 0>;

		gpio-controller;

		interrupt-controller;

		semtech,probe-reset;



		pinctrl-names = "default";

		pinctrl-0 = <&dsi1_hpd_cfg_pins

			&dsi1_cdet_cfg_pins

			&dsi2_hpd_cfg_pins

			&dsi2_cdet_cfg_pins

			&dp_hpd_cfg_pins>;



		dsi1_hpd_cfg_pins: gpio0-cfg {

			pins = "gpio0";

			bias-pull-up;

		};



		dsi1_cdet_cfg_pins: gpio1-cfg {

			pins = "gpio1";

			bias-pull-down;

		};



		dsi2_hpd_cfg_pins: gpio2-cfg {

			pins = "gpio2";

			bias-pull-up;

		};



		dsi2_cdet_cfg_pins: gpio3-cfg {

			pins = "gpio3";

			bias-pull-down;

		};



		dp_hpd_cfg_pins: gpio8-cfg {

			pins = "gpio8";

			bias-pull-down;

		};

	};



	i2c-mux@77 {

		compatible = "nxp,pca9542";

		reg = <0x77>;

		#address-cells = <1>;

		#size-cells = <0>;



		i2c@0 {

			#address-cells = <1>;

			#size-cells = <0>;

			reg = <0>;



			anx_7625_1: anx7625@2c {

				compatible = "analogix,anx7625";

				reg = <0x2c>;

				interrupt-parent = <&ioexp>;

				interrupts = <0 0>;

				cbl_det-gpio = <&ioexp 1 0>;

				power_en-gpio = <&tlmm 47 0>;

				reset_n-gpio = <&tlmm 49 0>;

			};

		};



		i2c@1 {

			#address-cells = <1>;

			#size-cells = <0>;

			reg = <1>;



			anx_7625_2: anx7625@2c {

				compatible = "analogix,anx7625";

				reg = <0x2c>;

				interrupt-parent = <&ioexp>;

				interrupts = <2 0>;

				cbl_det-gpio = <&ioexp 3 0>;

				power_en-gpio = <&tlmm 87 0>;

				reset_n-gpio = <&tlmm 29 0>;

			};

		};

	};

};



&anx_7625_1 {

	ports {

		#address-cells = <1>;

		#size-cells = <0>;



		port@0 {

			reg = <0>;

			anx_7625_1_in: endpoint {

				remote-endpoint = <&dsi_anx_7625_1_out>;

			};

		};

	};

};



&anx_7625_2 {

	ports {

		#address-cells = <1>;

		#size-cells = <0>;



		port@0 {

			reg = <0>;

			anx_7625_2_in: endpoint {

				remote-endpoint = <&dsi_anx_7625_2_out>;

			};

		};

	};

};



#include "dsi-panel-ext-bridge-1080p.dtsi"



&dsi_ext_bridge_1080p {

	timing@0{

		qcom,mdss-dsi-panel-phy-timings = [00 1E 08 07 24 22

			08 08 05 02 04 00 19 17];

	};

};



&soc {

	dsi_anx_7625_1: qcom,dsi-display@17 {

		label = "dsi_anx_7625_1";

		qcom,dsi-display-active;

		qcom,display-type = "primary";



		qcom,dsi-ctrl-num = <0>;

		qcom,dsi-phy-num = <0>;

		qcom,dsi-select-clocks = "mux_byte_clk0", "mux_pixel_clk0";



		qcom,dsi-panel = <&dsi_ext_bridge_1080p>;

	};



	dsi_anx_7625_2: qcom,dsi-display@18 {

		label = "dsi_anx_7625_2";

		qcom,dsi-display-active;

		qcom,display-type = "secondary";



		qcom,dsi-ctrl-num = <1>;

		qcom,dsi-phy-num = <1>;

		qcom,dsi-select-clocks = "mux_byte_clk1", "mux_pixel_clk1";



		qcom,dsi-panel = <&dsi_ext_bridge_1080p>;

	};



	dsi_dp1: qcom,dsi-display@1 {

		compatible = "qcom,dsi-display";

		label = "primary";



		qcom,dsi-ctrl = <&mdss_dsi0 &mdss_dsi1>;

		qcom,dsi-phy = <&mdss_dsi_phy0 &mdss_dsi_phy1>;



		clocks = <&mdss_dsi0_pll BYTECLK_MUX_0_CLK>,

			 <&mdss_dsi0_pll PCLK_MUX_0_CLK>,

			 <&mdss_dsi1_pll BYTECLK_MUX_1_CLK>,

			 <&mdss_dsi1_pll PCLK_MUX_1_CLK>;

		clock-names = "mux_byte_clk0", "mux_pixel_clk0",

			      "mux_byte_clk1", "mux_pixel_clk1";



		qcom,dsi-display-list =

			<&dsi_anx_7625_1>;



		ports {

			#address-cells = <1>;

			#size-cells = <0>;



			port@0 {

				reg = <0>;

				dsi_anx_7625_1_out: endpoint {

					remote-endpoint = <&anx_7625_1_in>;

				};

			};

		};

	};



	dsi_dp2: qcom,dsi-display@2 {

		compatible = "qcom,dsi-display";

		label = "secondary";



		qcom,dsi-ctrl = <&mdss_dsi0 &mdss_dsi1>;

		qcom,dsi-phy = <&mdss_dsi_phy0 &mdss_dsi_phy1>;



		clocks = <&mdss_dsi0_pll BYTECLK_MUX_0_CLK>,

			 <&mdss_dsi0_pll PCLK_MUX_0_CLK>,

			 <&mdss_dsi1_pll BYTECLK_MUX_1_CLK>,

			 <&mdss_dsi1_pll PCLK_MUX_1_CLK>;

		clock-names = "mux_byte_clk0", "mux_pixel_clk0",

			      "mux_byte_clk1", "mux_pixel_clk1";



		qcom,dsi-display-list =

			<&dsi_anx_7625_2>;



		ports {

			#address-cells = <1>;

			#size-cells = <0>;



			port@0 {

				reg = <0>;

				dsi_anx_7625_2_out: endpoint {

					remote-endpoint = <&anx_7625_2_in>;

				};

			};

		};

	};



	refgen: refgen-regulator@88e7000 {

		compatible = "qcom,refgen-regulator";

		reg = <0x88e7000 0x60>;

		regulator-name = "refgen";

		regulator-enable-ramp-delay = <5>;

	};



	sde_wb: qcom,wb-display@0 {

		compatible = "qcom,wb-display";

		cell-index = <0>;

		label = "wb_display";

	};



	ext_disp: qcom,msm-ext-disp {

		compatible = "qcom,msm-ext-disp";



		ext_disp_audio_codec: qcom,msm-ext-disp-audio-codec-rx {

			compatible = "qcom,msm-ext-disp-audio-codec-rx";

		};

	};

};



&mdss_dsi_phy0 {

	qcom,panel-force-clock-lane-hs;

};



&mdss_dsi_phy1 {

	qcom,panel-force-clock-lane-hs;

};



&mdss_mdp {

	connectors = <&sde_rscc &dsi_dp1 &dsi_dp2 &sde_dp &sde_wb>;

};

arch/arm64/boot/dts/qcom/sa8155-adp-star.dtsi

+2 −1
Original line number Diff line number Diff line 
/* Copyright (c) 2018, The Linux Foundation. All rights reserved.

/* Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and
@@ -12,4 +12,5 @@ 


#include "sa8155-adp-common.dtsi"

#include "sm8150-camera-sensor-adp-star.dtsi"

#include "sa8155-adp-star-display.dtsi"