Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 5882079c authored by qctecmdr Service's avatar qctecmdr Service Committed by Gerrit - the friendly Code Review server
Browse files

Merge "ARM: dts: msm: Add device nodes for pm640 and pm640l"

parents d176d292 e1d9c5ae

arch/arm64/boot/dts/qcom/pm640.dtsi

0 → 100644
+110 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2018, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



#include <dt-bindings/input/input.h>

#include <dt-bindings/input/qcom,qpnp-power-on.h>

#include <dt-bindings/interrupt-controller/irq.h>

#include <dt-bindings/spmi/spmi.h>



&spmi_bus {

	qcom,pm640@0 {

		compatible = "qcom,spmi-pmic";

		reg = <0x0 SPMI_USID>;

		#address-cells = <1>;

		#size-cells = <1>;



		pm640_revid: qcom,revid@100 {

			compatible = "qcom,qpnp-revid";

			reg = <0x100 0x100>;

		};



		qcom,power-on@800 {

			compatible = "qcom,qpnp-power-on";

			reg = <0x800 0x100>;

			interrupts = <0x0 0x8 0x0 IRQ_TYPE_NONE>,

				     <0x0 0x8 0x1 IRQ_TYPE_NONE>;

			interrupt-names = "kpdpwr", "resin";

			qcom,pon-dbc-delay = <15625>;

			qcom,kpdpwr-sw-debounce;

			qcom,system-reset;

			qcom,store-hard-reset-reason;



			qcom,pon_1 {

				qcom,pon-type = <PON_POWER_ON_TYPE_KPDPWR>;

				qcom,pull-up = <1>;

				linux,code = <KEY_POWER>;

			};



			qcom,pon_2 {

				qcom,pon-type = <PON_POWER_ON_TYPE_RESIN>;

				qcom,pull-up = <1>;

				linux,code = <KEY_VOLUMEDOWN>;

			};

		};



		pm640_misc: qcom,misc@900 {

			compatible = "qcom,qpnp-misc";

			reg = <0x900 0x100>;

		};



		pm640_tz: qcom,temp-alarm@2400 {

			compatible = "qcom,spmi-temp-alarm";

			reg = <0x2400 0x100>;

			interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>;

			#thermal-sensor-cells = <0>;

			qcom,temperature-threshold-set = <1>;

		};



		pm640_clkdiv: clock-controller@5b00 {

			compatible = "qcom,spmi-clkdiv";

			reg = <0x5b00 0x100>;

			#clock-cells = <1>;

			qcom,num-clkdivs = <1>;

			clock-output-names = "pm640_div_clk1";

			clocks = <&clock_rpmh RPMH_CXO_CLK>;

			clock-names = "xo";

		};



		pm640_gpios: pinctrl@c000 {

			compatible = "qcom,spmi-gpio";

			reg = <0xc000 0xa00>;

			interrupts = <0x0 0xc0 0 IRQ_TYPE_NONE>,

					<0x0 0xc1 0 IRQ_TYPE_NONE>,

					<0x0 0xc2 0 IRQ_TYPE_NONE>,

					<0x0 0xc3 0 IRQ_TYPE_NONE>,

					<0x0 0xc6 0 IRQ_TYPE_NONE>,

					<0x0 0xc7 0 IRQ_TYPE_NONE>;

			interrupt-names = "pm640_gpio1", "pm640_gpio2",

					"pm640_gpio3", "pm640_gpio4",

					"pm640_gpio7", "pm640_gpio8";

			gpio-controller;

			#gpio-cells = <2>;

			qcom,gpios-disallowed = <5 6 9 10>;

		};

	};



	qcom,pm640@1 {

		compatible ="qcom,spmi-pmic";

		reg = <0x1 SPMI_USID>;

		#address-cells = <1>;

		#size-cells = <1>;



		pm640_vib: qcom,vibrator@5300 {

			compatible = "qcom,qpnp-vibrator-ldo";

			reg = <0x5300 0x100>;

			qcom,vib-ldo-volt-uv = <3000000>;

			qcom,vib-overdrive-volt-uv = <3544000>;

		};

	};

};

arch/arm64/boot/dts/qcom/pm640l.dtsi

0 → 100644
+267 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



#include <dt-bindings/spmi/spmi.h>

#include <dt-bindings/interrupt-controller/irq.h>



&spmi_bus {

	qcom,pm640l@4 {

		compatible = "qcom,spmi-pmic";

		reg = <0x4 SPMI_USID>;

		#address-cells = <1>;

		#size-cells = <1>;



		pm640l_revid: qcom,revid@100 {

			compatible = "qcom,qpnp-revid";

			reg = <0x100 0x100>;

		};



		qcom,power-on@800 {

			compatible = "qcom,qpnp-power-on";

			reg = <0x800 0x100>;

		};



		pm640l_tz: qcom,temp-alarm@2400 {

			compatible = "qcom,spmi-temp-alarm";

			reg = <0x2400 0x100>;

			interrupts = <0x4 0x24 0x0 IRQ_TYPE_EDGE_RISING>;

			#thermal-sensor-cells = <0>;

			qcom,temperature-threshold-set = <1>;

		};



		pm640l_clkdiv: clock-controller@5b00 {

			compatible = "qcom,spmi-clkdiv";

			reg = <0x5b00 0x100>;

			#clock-cells = <1>;

			qcom,num-clkdivs = <1>;

			clock-output-names = "pm640l_div_clk1";

			clocks = <&clock_rpmh RPMH_CXO_CLK>;

			clock-names = "xo";

		};



		pm640l_gpios: pinctrl@c000 {

			compatible = "qcom,spmi-gpio";

			reg = <0xc000 0xc00>;

			interrupts = <0x4 0xc0 0 IRQ_TYPE_NONE>,

					<0x4 0xc1 0 IRQ_TYPE_NONE>,

					<0x4 0xc2 0 IRQ_TYPE_NONE>,

					<0x4 0xc3 0 IRQ_TYPE_NONE>,

					<0x4 0xc4 0 IRQ_TYPE_NONE>,

					<0x4 0xc5 0 IRQ_TYPE_NONE>,

					<0x4 0xc7 0 IRQ_TYPE_NONE>,

					<0x4 0xc8 0 IRQ_TYPE_NONE>,

					<0x4 0xc9 0 IRQ_TYPE_NONE>,

					<0x4 0xca 0 IRQ_TYPE_NONE>,

					<0x4 0xcb 0 IRQ_TYPE_NONE>;

			interrupt-names = "pm640l_gpio1", "pm640l_gpio2",

					"pm640l_gpio3", "pm640l_gpio4",

					"pm640l_gpio5", "pm640l_gpio6",

					"pm640l_gpio8", "pm640l_gpio9",

					"pm640l_gpio10", "pm640l_gpio11",

					"pm640l_gpio12";

			gpio-controller;

			#gpio-cells = <2>;

			qcom,gpios-disallowed = <7>;

		};

	};



	qcom,pm640l@5 {

		compatible ="qcom,spmi-pmic";

		reg = <0x5 SPMI_USID>;

		#address-cells = <1>;

		#size-cells = <1>;



		pm640l_lcdb: qcom,lcdb@ec00 {

			compatible = "qcom,qpnp-lcdb-regulator";

			#address-cells = <1>;

			#size-cells = <1>;

			reg = <0xec00 0x100>;

			interrupts = <0x5 0xec 0x1 IRQ_TYPE_EDGE_RISING>;

			interrupt-names = "sc-irq";

			qcom,pmic-revid = <&pm640l_revid>;

			status = "disabled";



			lcdb_ldo_vreg: ldo {

				label = "ldo";

				regulator-name = "lcdb_ldo";

				regulator-min-microvolt = <4000000>;

				regulator-max-microvolt = <6000000>;

			};



			lcdb_ncp_vreg: ncp {

				label = "ncp";

				regulator-name = "lcdb_ncp";

				regulator-min-microvolt = <4000000>;

				regulator-max-microvolt = <6000000>;

			};

		};



		flash_led: qcom,leds@d300 {

			compatible = "qcom,qpnp-flash-led-v2";

			status = "okay";

			reg = <0xd300 0x100>;

			label = "flash";

			interrupts = <0x5 0xd3 0x0 IRQ_TYPE_EDGE_RISING>,

				     <0x5 0xd3 0x3 IRQ_TYPE_EDGE_RISING>,

				     <0x5 0xd3 0x4 IRQ_TYPE_EDGE_RISING>;

			interrupt-names = "led-fault-irq",

					  "all-ramp-down-done-irq",

					  "all-ramp-up-done-irq";

			qcom,hdrm-auto-mode;

			qcom,short-circuit-det;

			qcom,open-circuit-det;

			qcom,vph-droop-det;

			qcom,thermal-derate-en;

			qcom,thermal-derate-current = <200 500 1000>;

			qcom,isc-delay = <192>;

			qcom,pmic-revid = <&pm640l_revid>;



			pm640l_flash0: qcom,flash_0 {

				label = "flash";

				qcom,led-name = "led:flash_0";

				qcom,max-current = <1500>;

				qcom,default-led-trigger = "flash0_trigger";

				qcom,id = <0>;

				qcom,current-ma = <1000>;

				qcom,duration-ms = <1280>;

				qcom,ires-ua = <12500>;

				qcom,hdrm-voltage-mv = <325>;

				qcom,hdrm-vol-hi-lo-win-mv = <100>;

			};



			pm640l_flash1: qcom,flash_1 {

				label = "flash";

				qcom,led-name = "led:flash_1";

				qcom,max-current = <1500>;

				qcom,default-led-trigger = "flash1_trigger";

				qcom,id = <1>;

				qcom,current-ma = <1000>;

				qcom,duration-ms = <1280>;

				qcom,ires-ua = <12500>;

				qcom,hdrm-voltage-mv = <325>;

				qcom,hdrm-vol-hi-lo-win-mv = <100>;

			};



			pm640l_flash2: qcom,flash_2 {

				label = "flash";

				qcom,led-name = "led:flash_2";

				qcom,max-current = <750>;

				qcom,default-led-trigger = "flash2_trigger";

				qcom,id = <2>;

				qcom,current-ma = <500>;

				qcom,duration-ms = <1280>;

				qcom,ires-ua = <12500>;

				qcom,hdrm-voltage-mv = <325>;

				qcom,hdrm-vol-hi-lo-win-mv = <100>;

				status = "disabled";

			};



			pm640l_torch0: qcom,torch_0 {

				label = "torch";

				qcom,led-name = "led:torch_0";

				qcom,max-current = <500>;

				qcom,default-led-trigger = "torch0_trigger";

				qcom,id = <0>;

				qcom,current-ma = <300>;

				qcom,ires-ua = <12500>;

				qcom,hdrm-voltage-mv = <325>;

				qcom,hdrm-vol-hi-lo-win-mv = <100>;

			};



			pm640l_torch1: qcom,torch_1 {

				label = "torch";

				qcom,led-name = "led:torch_1";

				qcom,max-current = <500>;

				qcom,default-led-trigger = "torch1_trigger";

				qcom,id = <1>;

				qcom,current-ma = <300>;

				qcom,ires-ua = <12500>;

				qcom,hdrm-voltage-mv = <325>;

				qcom,hdrm-vol-hi-lo-win-mv = <100>;

			};



			pm640l_torch2: qcom,torch_2 {

				label = "torch";

				qcom,led-name = "led:torch_2";

				qcom,max-current = <500>;

				qcom,default-led-trigger = "torch2_trigger";

				qcom,id = <2>;

				qcom,current-ma = <300>;

				qcom,ires-ua = <12500>;

				qcom,hdrm-voltage-mv = <325>;

				qcom,hdrm-vol-hi-lo-win-mv = <100>;

				status = "disabled";

			};



			pm640l_switch0: qcom,led_switch_0 {

				label = "switch";

				qcom,led-name = "led:switch_0";

				qcom,led-mask = <1>;

				qcom,default-led-trigger = "switch0_trigger";

			};



			pm640l_switch1: qcom,led_switch_1 {

				label = "switch";

				qcom,led-name = "led:switch_1";

				qcom,led-mask = <2>;

				qcom,default-led-trigger = "switch1_trigger";

			};



			pm640l_switch2: qcom,led_switch_2 {

				label = "switch";

				qcom,led-name = "led:switch_2";

				qcom,led-mask = <3>;

				qcom,default-led-trigger = "switch2_trigger";

			};

		};



		pm640l_wled: qcom,wled@d800 {

			compatible = "qcom,pm640l-spmi-wled";

			reg = <0xd800 0x100>, <0xd900 0x100>;

			reg-names = "wled-ctrl-base", "wled-sink-base";

			label = "backlight";

			interrupts = <0x5 0xd8 0x1 IRQ_TYPE_EDGE_RISING>;

			interrupt-names = "ovp-irq";

			qcom,pmic-revid = <&pm640l_revid>;

			qcom,auto-calibration;

			status = "disabled";

		};



		pm640l_lpg: qcom,pwms@b100 {

			compatible = "qcom,pwm-lpg";

			reg = <0xb100 0x300>;

			reg-names = "lpg-base";

			#pwm-cells = <2>;

		};



		pm640l_rgb_led: qcom,leds@d000 {

			compatible = "qcom,tri-led";

			reg = <0xd000 0x100>;

			red {

				label = "red";

				pwms = <&pm640l_lpg 0 1000000>;

				led-sources = <0>;

			};

			green {

				label = "green";

				pwms = <&pm640l_lpg 1 1000000>;

				led-sources = <1>;

			};

			blue {

				label = "blue";

				pwms = <&pm640l_lpg 2 1000000>;

				led-sources = <2>;

			};

		};

	};

};

arch/arm64/boot/dts/qcom/sdm640.dtsi

+2 −0
Original line number Diff line number Diff line
@@ -1001,6 +1001,8 @@ 
	};

};



#include "pm640.dtsi"

#include "pm640l.dtsi"

#include "sdm640-pinctrl.dtsi"

#include "sdm640-stub-regulator.dtsi"

#include "sdm640-pm.dtsi"