Merge "Merge remote-tracking branch 'quic/msm-4.14' into dev/msm-4.14-display"...

			seconds. Defaults to 10*60 = 10mins. A value of 0

			disables the blank timer.

	core_ctl_disable_cpumask= [SMP]

			Exempt the CPUs from being managed by core_ctl.

			core_ctl operates on a cluster basis. So all the

			CPUs in a given cluster must be specified to disable

			core_ctl for that cluster.

	coredump_filter=

			[KNL] Change the default value for

			/proc/<pid>/coredump_filter.

| ARM            | Cortex-A57      | #834220         | ARM64_ERRATUM_834220        |

| ARM            | Cortex-A72      | #853709         | N/A                         |

| ARM            | Cortex-A73      | #858921         | ARM64_ERRATUM_858921        |

| ARM            | Cortex-A55      | #1024718        | ARM64_ERRATUM_1024718       |

| ARM            | MMU-500         | #841119,#826419 | N/A                         |

|                |                 |                 |                             |

| Cavium         | ThunderX ITS    | #22375, #24313  | CAVIUM_ERRATUM_22375        |

- MTP device:

  compatible = "qcom,mtp"

- IDP device:

  compatible = "qcom,idp"

- FLUID device:

  compatible = "qcom,fluid"

compatible = "qcom,sm6150-mtp"

compatible = "qcom,sm6150-cdp"

compatible = "qcom,sm6150-qrd"

compatible = "qcom,sm6150-idp"

compatible = "qcom,qcs405-rumi"

compatible = "qcom,qcs405-mtp"

compatible = "qcom,qcs405-cdp"

* RPM Stats

RPM maintains a counter of the masters i.e APPS, MPPS etc

number of times the SoC entered a deeper sleep mode involving

lowering or powering down the backbone rails - Cx and Mx and

the oscillator clock, XO.

PROPERTIES

- compatible:

	Usage: required

	Value type: <string>

	Definition: Should be "qcom,rpm-master-stats".

- reg:

	Usage: required

	Value type: <prop-encoded-array>

	Definition: The address on the RPM RAM from where the stats are read

	            should be provided as "phys_addr_base". The offset from

	            which the stats are available should be provided as

	            "offset_addr".

- reg-names:

	Usage: required

	Value type: <prop-encoded-array>

	Definition: Provides labels for the reg property.

- qcom,masters:

	Usage: required

	Value tye: <string list>

	Defination: Provides the masters list.

qcom,master-offset:

	Usage: required

	Value tye: <prop-encoded-array>

	Defination: Provides the masters list

EXAMPLE:

qcom,rpm-master-stats@60150 {

		compatible = "qcom,rpm-master-stats";

		reg = <0x60150 0x5000>;

		qcom,masters = "APSS", "MPSS", "PRONTO", "TZ", "LPASS";

		qcom,master-stats-version = <2>;

		qcom,master-offset = <4096>;

	};

* MSM Subsystem Power Manager (spm-v2)

S4 generation of MSMs have SPM hardware blocks to control the Application

Processor Sub-System power. These SPM blocks run individual state machine

to determine what the core (L2 or Krait/Scorpion) would do when the WFI

instruction is executed by the core. The SAW hardware block handles SPM and

AVS functionality for the cores.

The devicetree representation of the SPM block should be:

Required properties

- compatible: "qcom,spm-v2"

- reg: The physical address and the size of the SPM's memory mapped registers

- qcom,cpu: phandle for the CPU that the SPM block is attached to.  This field

is required on only for SPMs that control the CPU. This field is not required

for SPMs that control L2/CCI/L3

- qcom,saw2-ver-reg: The location of the version register

- qcom,name: The name with which a SPM device is identified by the power

management code.

----------------------------------------------------

Non-PSCI targets should follow the rules shown below

----------------------------------------------------

Required properties for only Non-PSCI targets:

- qcom,saw2-cfg: SAW2 configuration register

- qcom,saw2-spm-ctl: The SPM control register

- qcom,saw2-spm-dly: Provides the values for the SPM delay command in the SPM

	sequence

Optional properties for only Non-PSCI targets

- reg-names: Register names for the physical address required if spm device

        has more than one physical addressed to be mapped. Allowed register

        names are: "saw-base", "q2s", "hw-flush", "slpreq"

- qcom,saw2-avs-ctl: The AVS control register

- qcom,saw2-avs-hysterisis: The AVS hysterisis register to delay the AVS

	controller requests

- qcom,vctl-timeout-us: The timeout value in us to wait for voltage to change

	after sending the voltage command to the PMIC

- qcom,saw2-avs-limit: The AVS limit register

- qcom,saw2-avs-dly: The AVS delay register is used to specify the delay values

	between AVS controller requests

- qcom,saw2-pmic-data0..7: Specify the pmic data value and the associated FTS

	index to send the PMIC data to

- qcom,vctl-port: The PVC (PMIC Virtual Channel) port used for changing

	voltage

- qcom,phase-port: The PVC port used for changing the number of phases

- qcom,pfm-port: The PVC port used for enabling PWM/PFM modes

- qcom,cpu-vctl-mask: Mask of cpus, whose voltage the spm device can control.

	Depricated: Replaced with cpu-vctl-list when cpu phandles are available.

- qcom,cpu-vctl-list: List of cpu node phandles, whose voltage the spm device

	can control.

- qcom,use-qchannel-for-pc: Boolean property to specify if qchannel should be

	ignored when entering power collapse. If this property is set qchannel

	will not be ignored in power collapse.

- qcom,supports-rpm-hs: Indicates that this SPM instance allow handshake with

RPM processor when executing the sleep command in the SPM sequence. Supported

only on SAW2 v3.0 and above.

- qcom,use-spm-clock-gating: This boolean property is used to indicate that

	the SPM needs to be used for clock gating. Using the SPM for clock

	gating would result in auto clock gating being disabled. Use this on

	targets that do not support or do not use auto clock gating.

- qcom,use-qchannel-for-wfi: This boolean property is used to indicate

	that the SPM gets triggerd by the qchannel and not by means of

	wfi. So a wfe could trigger a spm for clock gating as well.

- modes: Lists all the available low power modes for the device

Second level properties for modes

Required properties (if modes node is available)

- qcom,label: Specifies the mode name such as:

            qcom,saw2-spm-cmd-wfi: WFI mode

            qcom,saw2-spm-cmd-ret: Retention mode

            qcom,saw2-spm-cmd-spc: Standalone PC mode

            qcom,saw2-spm-cmd-pc: Power Collapse mode

            qcom,saw2-spm-cmd-gdhs: GDHS mode

- qcom,sequence: Specifies sequence for the low power mode

Optional properties

- qcom,pc_mode: Specifies pc_mode bit should be set in the SPM control register

- qcom,ret_mode: Specifies ret_mode bit should be set in the SPM control register

- qcom,spm_en: Specifies spm_en bit should be set in the SPM control register

- qcom,isar: Specifies isar bit should be set in the SPM control register

	Specify this property only if SPM should retain its start address at

	the end of the program.

- qcom,slp_cmd_mode: Specifies slp_cmd_mode bit should be set in SPM control register.

	Adding this property results in SPM handshaking with RPM. Please remove

	the RPM handshake command from the sleep sequence, replace that with

	Sleep without RPM handshake command.

- qcom,event_sync: Specifies event_sync byte should be set in SPM control

	register.

----------------------------------------------------

PSCI targets should follow the rules shown below

----------------------------------------------------

Optional properties for only PSCI targets:

- qcom,saw2-avs-ctl: The AVS control register

- qcom,saw2-avs-hysterisis: The AVS hysterisis register to delay the AVS

	controller requests

- qcom,vctl-timeout-us: The timeout value in us to wait for voltage to change

	after sending the voltage command to the PMIC

- qcom,saw2-avs-limit: The AVS limit register

- qcom,saw2-avs-dly: The AVS delay register is used to specify the delay values

	between AVS controller requests

- qcom,vctl-port: The PVC (PMIC Virtual Channel) port used for changing

	voltage

- qcom,phase-port: The PVC port used for changing the number of phases

- qcom,pfm-port: The PVC port used for enabling PWM/PFM modes

- qcom,cpu-vctl-list: List of cpu node phandles, whose voltage the spm device

	can control.

Example 1:

	qcom,spm@f9089000 {

		compatible = "qcom,spm-v2";

		#address-cells = <1>;

		#size-cells = <1>;

		reg = <0xf9089000 0x1000>;

		qcom,cpu = <&CPU0>;

		qcom,saw2-ver-reg = <0xfd0>;

		qcom,saw2-cfg = <0x1b>;

		qcom,saw2-avs-ctl = <0>;

		qcom,saw2-avs-hysteresis = <0>;

		qcom,saw2-avs-limit = <0>;

		qcom,saw2-avs-dly= <0>;

		qcom,saw2-spm-dly= <0x20000400>;

		qcom,saw2-spm-ctl = <0x1>;

		qcom,cpu-vctl-list = <&CPU0 &CPU1 &CPU2 &CPU3>;

		qcom,mode0 {

			qcom,label = "qcom,saw2-spm-cmd-wfi";

			qcom,sequence = [03 0b 0f];

			qcom,spm_en;

		};

		qcom,mode1 {

			qcom,label = "qcom,saw2-spm-cmd-spc";

			qcom,sequence = [00 20 50 80 60 70 10 92

				a0 b0 03 68 70 3b 92 a0 b0

				82 2b 50 10 30 02 22 30 0f];

			qcom,spm_en;

			qcom,pc_mode;

		};

		qcom,mode2 {

			qcom,label = "qcom,saw2-spm-cmd-pc";

			qcom,sequence = [00 20 10 92 a0 b0 07 3b 92

				a0 b0 82 10 30 02 22 30 0f];

			qcom,spm_en;

			qcom,pc_mode;

		};

	};

Example 2:

	qcom,spm@9A10000 {

		compatible = "qcom,spm-v2";

		#address-cells = <1>;

		#size-cells = <1>;

		reg = <0x9A10000 0x1000>;

		qcom,name = "system-cbf"; /* CBF SAW */

		qcom,saw2-ver-reg = <0xFD0>;

		qcom,cpu-vctl-list = <&CPU0 &CPU1 &CPU2 &CPU3>;

		qcom,vctl-timeout-us = <50>;

		qcom,vctl-port = <0x0>;

		qcom,phase-port = <0x1>;

		qcom,saw2-avs-ctl = <0x1100>;

		qcom,pfm-port = <0x2>;

};