Merge "ARM: dts: msm: add support for sharp wuxga panel on sm6150" (4721479c) · Commits · e / devices / android_kernel_oneplus_sm8150

arch/arm64/boot/dts/qcom/dsi-panel-sharp-split-link-wuxga-video.dtsi

0 → 100644

+74 −0

Original line number	Diff line number	Diff line
		/* Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 and
		* only version 2 as published by the Free Software Foundation.
		*
		* This program is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*/

		&mdss_mdp {
		dsi_sharp_split_link_wuxga_video:
		qcom,mdss_dsi_sharp_split_link_wuxga_video {
		qcom,mdss-dsi-panel-name =
		"sharp split link video mode dsi panel";
		qcom,mdss-dsi-panel-type = "dsi_video_mode";

		qcom,mdss-dsi-virtual-channel-id = <0>;
		qcom,mdss-dsi-stream = <0>;
		qcom,mdss-dsi-h-left-border = <0>;
		qcom,mdss-dsi-h-right-border = <0>;
		qcom,mdss-dsi-v-top-border = <0>;
		qcom,mdss-dsi-v-bottom-border = <0>;
		qcom,mdss-dsi-bpp = <24>;
		qcom,mdss-dsi-color-order = "rgb_swap_rgb";
		qcom,mdss-dsi-underflow-color = <0xff>;
		qcom,mdss-dsi-border-color = <0>;
		qcom,mdss-dsi-h-sync-pulse = <0>;
		qcom,mdss-dsi-traffic-mode = "non_burst_sync_event";
		qcom,mdss-dsi-bllp-eof-power-mode;
		qcom,mdss-dsi-bllp-power-mode;
		qcom,mdss-dsi-tx-eot-append;
		qcom,mdss-dsi-lane-0-state;
		qcom,mdss-dsi-lane-1-state;
		qcom,mdss-dsi-lane-2-state;
		qcom,mdss-dsi-lane-3-state;
		qcom,mdss-dsi-dma-trigger = "trigger_sw";
		qcom,mdss-dsi-mdp-trigger = "none";
		qcom,mdss-dsi-lp11-init;
		qcom,mdss-dsi-reset-sequence = <1 2>, <0 5>, <1 120>;
		qcom,mdss-pan-physical-width-dimension = <83>;
		qcom,mdss-pan-physical-height-dimension = <133>;
		qcom,split-link-enabled;
		qcom,sublinks-count = <2>;
		qcom,lanes-per-sublink = <2>;
		qcom,mdss-dsi-display-timings {
		timing@0{
		qcom,mdss-dsi-panel-width = <600>;
		qcom,mdss-dsi-panel-height = <1920>;
		qcom,mdss-dsi-h-front-porch = <54>;
		qcom,mdss-dsi-h-back-porch = <4>;
		qcom,mdss-dsi-h-pulse-width = <6>;
		qcom,mdss-dsi-h-sync-skew = <0>;
		qcom,mdss-dsi-v-back-porch = <6>;
		qcom,mdss-dsi-v-front-porch = <12>;
		qcom,mdss-dsi-v-pulse-width = <2>;
		qcom,mdss-dsi-panel-framerate = <60>;
		qcom,mdss-dsi-on-command =
		[05 01 00 00 a0 00 02 11 00];
		qcom,mdss-dsi-post-panel-on-command =
		[05 01 00 00 a0 00 02 29 00];
		qcom,mdss-dsi-off-command =
		[05 01 00 00 02 00 02 28 00
		05 01 00 00 a0 00 02 10 00];
		qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
		qcom,mdss-dsi-off-command-state = "dsi_hs_mode";
		qcom,mdss-dsi-panel-timings =
		[00 24 07 08 0e 14 07 09 07 03 04 00];
		};
		};
		};
		};

arch/arm64/boot/dts/qcom/sm6150-idp.dtsi

+10 −1

Original line number	Diff line number	Diff line
		/* Copyright (c) 2018, The Linux Foundation. All rights reserved.
		/* Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 and
		@@ -384,3 +384,12 @@
		qcom,platform-te-gpio = <&tlmm 90 0>;
		qcom,platform-reset-gpio = <&tlmm 91 0>;
		};

		&dsi_sharp_split_link_wuxga_video {
		qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
		qcom,mdss-dsi-bl-min-level = <1>;
		qcom,mdss-dsi-bl-max-level = <4095>;
		qcom,platform-te-gpio = <&tlmm 90 0>;
		qcom,platform-reset-gpio = <&tlmm 91 0>;
		};

arch/arm64/boot/dts/qcom/sm6150-sde-display.dtsi

+32 −1

Original line number	Diff line number	Diff line
		@@ -19,6 +19,7 @@
		#include "dsi-panel-rm69298-truly-amoled-fhd-plus-cmd.dtsi"
		#include "dsi-panel-td4330-truly-singlemipi-fhd-cmd.dtsi"
		#include "dsi-panel-td4330-truly-singlemipi-fhd-video.dtsi"
		#include "dsi-panel-sharp-split-link-wuxga-video.dtsi"
		#include <dt-bindings/clock/mdss-14nm-pll-clk.h>

		&soc {
		@@ -194,6 +195,17 @@
		qcom,dsi-panel = <&dsi_td4330_truly_cmd>;
		};

		dsi_sharp_split_link_wuxga_vid_display: qcom,dsi-display@9 {
		label = "dsi_sharp_split_link_wuxga_vid_display";
		qcom,display-type = "primary";

		qcom,dsi-ctrl-num = <0>;
		qcom,dsi-phy-num = <0>;
		qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0";

		qcom,dsi-panel = <&dsi_sharp_split_link_wuxga_video>;
		};

		sde_dsi: qcom,dsi-display {
		compatible = "qcom,dsi-display";

		@@ -223,7 +235,8 @@
		&dsi_rm69298_truly_amoled_vid_display
		&dsi_rm69298_truly_amoled_cmd_display
		&dsi_td4330_truly_vid_display
		&dsi_td4330_truly_cmd_display>;
		&dsi_td4330_truly_cmd_display
		&dsi_sharp_split_link_wuxga_vid_display>;
		};

		sde_wb: qcom,wb-display@0 {
		@@ -486,3 +499,21 @@
		};
		};
		};

		&dsi_sharp_split_link_wuxga_video {
		qcom,mdss-dsi-t-clk-post = <0x0E>;
		qcom,mdss-dsi-t-clk-pre = <0x35>;
		qcom,mdss-dsi-display-timings {
		timing@0{
		qcom,mdss-dsi-panel-phy-timings =
		[25 1f 09 0a 06 03 04 a0
		25 1f 09 0a 06 03 04 a0
		25 1f 09 0a 06 03 04 a0
		25 1f 09 0a 06 03 04 a0
		25 1f 08 0a 06 03 04 a0];

		qcom,display-topology = <1 0 1>;
		qcom,default-topology-index = <0>;
		};
		};
		};

arch/arm64/boot/dts/qcom/sm6150-sde.dtsi

+1 −0

Original line number	Diff line number	Diff line
		@@ -388,6 +388,7 @@
		clock-names = "byte_clk", "byte_clk_rcg", "byte_intf_clk",
		"pixel_clk", "pixel_clk_rcg",
		"esc_clk";
		qcom,split-link-supported;

		qcom,ctrl-supply-entries {
		#address-cells = <1>;