Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 41bcb2fc authored by Yulei Yao's avatar Yulei Yao Committed by Gerrit - the friendly Code Review server
Browse files

msm: camera: dtsi: Add camera support for trinket QRD 



Add camera device tree to trinket QRD to enable camera
function.

Change-Id: I0518956386daf567ce5446d98887e99e2f4d368c
Signed-off-by: default avatarYulei Yao <yuleiy@codeaurora.org>
parent 71f1e4e5

arch/arm64/boot/dts/qcom/trinket-camera-sensor-qrd.dtsi

0 → 100644
+230 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2019, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */

&soc {

	led_flash0: qcom,camera-flash@0 {

		cell-index = <0>;

		compatible = "qcom,camera-flash";

		qcom,flash-source = <&pmi632_flash0 &pmi632_flash1>;

		qcom,torch-source = <&pmi632_torch0 &pmi632_torch1>;

		qcom,switch-source = <&pmi632_switch0 &pmi632_switch0>;

		status = "ok";

	};

};



&cci {

	actuator0: qcom,actuator@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,actuator";

		qcom,cci-master = <0>;

		cam_vaf-supply = <&L5P>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2800000>;

		qcom,cam-vreg-max-voltage = <2800000>;

		qcom,cam-vreg-op-mode = <0>;

	};



	eeprom0: qcom,eeprom@0 {

		cell-index = <0>;

		reg = <0>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&L12A>;

		cam_vana-supply = <&L3P>;

		cam_vdig-supply = <&L2P>;

		cam_clk-supply = <&camss_top_gdsc>;

		cam_vaf-supply = <&L5P>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig",

				"cam_clk", "cam_vaf";

		qcom,cam-vreg-min-voltage = <1800000 2800000 1104000 0 2800000>;

		qcom,cam-vreg-max-voltage = <1800000 2800000 1104000 0 2800000>;

		qcom,cam-vreg-op-mode = <0 80000 105000 0 100000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_rear_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_rear_suspend>;

		gpios = <&tlmm 34 0>,

			<&tlmm 48 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-req-tbl-num = <0 1>;

		qcom,gpio-req-tbl-flags = <1 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0";

		qcom,sensor-position = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_gcc GCC_CAMSS_MCLK0_CLK_SRC>,

				<&clock_gcc GCC_CAMSS_MCLK0_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	eeprom1: qcom,eeprom@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&L12A>;

		cam_vana-supply = <&L4P>;

		cam_vdig-supply = <&L1P>;

		cam_clk-supply = <&camss_top_gdsc>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig",

				"cam_clk";

		qcom,cam-vreg-min-voltage = <1800000 2800000 1200000 0>;

		qcom,cam-vreg-max-voltage = <1800000 2800000 1200000 0>;

		qcom,cam-vreg-op-mode = <0 80000 105000 0>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

			&cam_sensor_front_active>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

			&cam_sensor_front_suspend>;

		gpios = <&tlmm 36 0>,

		    <&tlmm 42 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-req-tbl-num = <0 1>;

		qcom,gpio-req-tbl-flags = <1 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK",

				"CAM_RESET";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_gcc GCC_CAMSS_MCLK2_CLK_SRC>,

		    <&clock_gcc GCC_CAMSS_MCLK2_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	qcom,camera@0 {

		cell-index = <0>;

		compatible = "qcom,camera";

		reg = <0x0>;

		qcom,csiphy-sd-index = <0>;

		qcom,csid-sd-index = <0>;

		qcom,mount-angle = <90>;

		qcom,actuator-src = <&actuator0>;

		qcom,eeprom-src = <&eeprom0>;

		qcom,led-flash-src = <&led_flash0>;

		cam_vio-supply = <&L12A>;

		cam_vana-supply = <&L3P>;

		cam_vdig-supply = <&L2P>;

		cam_clk-supply = <&camss_top_gdsc>;

		cam_vaf-supply = <&L5P>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig",

				"cam_clk", "cam_vaf";

		qcom,cam-vreg-min-voltage = <1800000 2800000 1104000 0 2800000>;

		qcom,cam-vreg-max-voltage = <1800000 2800000 1104000 0 2800000>;

		qcom,cam-vreg-op-mode = <0 80000 105000 0 100000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

				&cam_sensor_rear_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

				&cam_sensor_rear_suspend>;

		gpios = <&tlmm 34 0>,

			<&tlmm 48 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-req-tbl-num = <0 1>;

		qcom,gpio-req-tbl-flags = <1 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

					"CAM_RESET0";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_gcc GCC_CAMSS_MCLK0_CLK_SRC>,

				<&clock_gcc GCC_CAMSS_MCLK0_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	qcom,camera@1 {

		cell-index = <1>;

		compatible = "qcom,camera";

		reg = <0x1>;

		qcom,csiphy-sd-index = <1>;

		qcom,csid-sd-index = <1>;

		qcom,mount-angle = <90>;

		cam_vio-supply = <&L12A>;

		cam_vana-supply = <&L4P>;

		cam_vdig-supply = <&L1P>;

		cam_clk-supply = <&camss_top_gdsc>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig",

				"cam_clk";

		qcom,cam-vreg-min-voltage = <1800000 2800000 1200000 0>;

		qcom,cam-vreg-max-voltage = <1800000 2800000 1200000 0>;

		qcom,cam-vreg-op-mode = <0 80000 105000 0>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				 &cam_sensor_rear2_active>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				 &cam_sensor_rear2_suspend>;

		gpios = <&tlmm 35 0>,

			<&tlmm 46 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-req-tbl-num = <0 1>;

		qcom,gpio-req-tbl-flags = <1 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",

					  "CAM_RESET1";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_gcc GCC_CAMSS_MCLK1_CLK_SRC>,

			<&clock_gcc GCC_CAMSS_MCLK1_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	qcom,camera@2 {

		cell-index = <2>;

		compatible = "qcom,camera";

		reg = <0x02>;

		qcom,csiphy-sd-index = <2>;

		qcom,csid-sd-index = <2>;

		qcom,mount-angle = <90>;

		qcom,eeprom-src = <&eeprom1>;

		cam_vio-supply = <&L12A>;

		cam_vana-supply = <&L4P>;

		cam_vdig-supply = <&L1P>;

		cam_clk-supply = <&camss_top_gdsc>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig",

				"cam_clk";

		qcom,cam-vreg-min-voltage = <1800000 2800000 1200000 0>;

		qcom,cam-vreg-max-voltage = <1800000 2800000 1200000 0>;

		qcom,cam-vreg-op-mode = <0 80000 105000 0>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

				 &cam_sensor_front_active>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

				 &cam_sensor_front_suspend>;

		gpios = <&tlmm 36 0>,

			<&tlmm 42 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-req-tbl-num = <0 1>;

		qcom,gpio-req-tbl-flags = <1 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					"CAM_RESET2";

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_gcc GCC_CAMSS_MCLK2_CLK_SRC>,

			<&clock_gcc GCC_CAMSS_MCLK2_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



};

arch/arm64/boot/dts/qcom/trinket-qrd-overlay.dts

+2 −1
Original line number Diff line number Diff line 
/* Copyright (c) 2018, The Linux Foundation. All rights reserved.

/* Copyright (c) 2018, 2019, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and
@@ -13,6 +13,7 @@ 
/dts-v1/;

/plugin/;



#include <dt-bindings/clock/qcom,gcc-trinket.h>

#include "trinket-qrd.dtsi"



/ {

arch/arm64/boot/dts/qcom/trinket-qrd.dtsi

+3 −0
Original line number Diff line number Diff line
@@ -18,6 +18,9 @@ 
#include "trinket-audio-overlay.dtsi"

#include <dt-bindings/clock/qcom,gcc-trinket.h>



#include <dt-bindings/clock/qcom,gcc-trinket.h>

#include "trinket-camera-sensor-qrd.dtsi"



&qupv3_se1_i2c {

	status = "ok";

	#include "smb1355.dtsi"