Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 384bbed2 authored by stonez's avatar stonez
Browse files

qcacmn: add vendor subcommand QCA_NL80211_VENDOR_SUBCMD_MPTA_HELPER_CONFIG 

This subcommand is used to update zigbee state and specified wlan durations
to enhance success ratio of zigbee joining network.
NL attributes qca_mpta_helper_vendor_attr is used to deliver the parameters
to host driver.

Change-Id: I7ec82e11fa3aaea88f20e1c04c464153549bf44c
CRs-Fixed: 2413320
parent b5457f8d

os_if/linux/qca_vendor.h

+214 −0
Original line number Original line Diff line number Diff line
@@ -263,6 +263,30 @@ 
 *	test configuration. Attributes for this command are defined in

 *	test configuration. Attributes for this command are defined in

 *	enum qca_wlan_vendor_attr_wifi_test_config.

 *	enum qca_wlan_vendor_attr_wifi_test_config.

 *

 *

 * @QCA_NL80211_VENDOR_SUBCMD_NAN_EXT: An extendable version of NAN vendor

 *	command. The earlier command for NAN, QCA_NL80211_VENDOR_SUBCMD_NAN,

 *	carried a payload which was a binary blob of data. The command was not

 *	extendable to send more information. The newer version carries the

 *	legacy blob encapsulated within an attribute and can be extended with

 *	additional vendor attributes that can enhance the NAN command

 *	interface.

 * @QCA_NL80211_VENDOR_SUBCMD_GET_FW_STATE: Sub command to get firmware state.

 *	The returned firmware state is specified in the attribute

 *	QCA_WLAN_VENDOR_ATTR_FW_STATE.

 * @QCA_NL80211_VENDOR_SUBCMD_PEER_STATS_CACHE_FLUSH: This vendor subcommand

 *	is used by host driver to flush per-peer cached statistics to user space

 *	application. This interface is used as an event from host driver to

 *	user space application. Attributes for this event are specified in

 *	enum qca_wlan_vendor_attr_peer_stats_cache_params.

 *	QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_DATA attribute is expected to be

 *	sent as event from host driver.

 * @QCA_NL80211_VENDOR_SUBCMD_MPTA_HELPER_CONFIG: This sub command is used to

 *	improve the success rate of Zigbee joining network.

 *	Due to PTA master limitation, zigbee joining network success rate is

 *	low while wlan is working. Wlan host driver need to configure some

 *	parameters including Zigbee state and specific WLAN periods to enhance

 *	PTA master. All this parameters are delivered by the NetLink attributes

 *	defined in "enum qca_mpta_helper_vendor_attr".

 */

 */





enum qca_nl80211_vendor_subcmds {

enum qca_nl80211_vendor_subcmds {
@@ -470,6 +494,9 @@ enum qca_nl80211_vendor_subcmds { 
	/* Wi-Fi test configuration subcommand */

	/* Wi-Fi test configuration subcommand */

	QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION = 169,

	QCA_NL80211_VENDOR_SUBCMD_WIFI_TEST_CONFIGURATION = 169,

	QCA_NL80211_VENDOR_SUBCMD_THROUGHPUT_CHANGE_EVENT = 174,

	QCA_NL80211_VENDOR_SUBCMD_THROUGHPUT_CHANGE_EVENT = 174,

	QCA_NL80211_VENDOR_SUBCMD_GET_FW_STATE = 177,

	QCA_NL80211_VENDOR_SUBCMD_PEER_STATS_CACHE_FLUSH = 178,

	QCA_NL80211_VENDOR_SUBCMD_MPTA_HELPER_CONFIG = 179,

};

};





enum qca_wlan_vendor_tos {

enum qca_wlan_vendor_tos {
@@ -6126,4 +6153,191 @@ enum qca_wlan_vendor_attr_throughput_change { 
	QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_AFTER_LAST - 1,

	QCA_WLAN_VENDOR_ATTR_THROUGHPUT_CHANGE_AFTER_LAST - 1,

};

};





/* enum qca_wlan_nan_subcmd_type - Type of NAN command used by attribute

 * QCA_WLAN_VENDOR_ATTR_NAN_SUBCMD_TYPE as a part of vendor command

 * QCA_NL80211_VENDOR_SUBCMD_NAN_EXT.

 */

enum qca_wlan_nan_ext_subcmd_type {

	/* Subcmd of type NAN Enable Request */

	QCA_WLAN_NAN_EXT_SUBCMD_TYPE_ENABLE_REQ = 1,

	/* Subcmd of type NAN Disable Request */

	QCA_WLAN_NAN_EXT_SUBCMD_TYPE_DISABLE_REQ = 2,

};



/**

 * enum qca_wlan_vendor_attr_nan_params - Used by the vendor command

 * QCA_NL80211_VENDOR_SUBCMD_NAN_EXT.

 */

enum qca_wlan_vendor_attr_nan_params {

	QCA_WLAN_VENDOR_ATTR_NAN_INVALID = 0,

	/* Carries NAN command for firmware component. Every vendor command

	 * QCA_NL80211_VENDOR_SUBCMD_NAN_EXT must contain this attribute with a

	 * payload containing the NAN command. NLA_BINARY attribute.

	 */

	QCA_WLAN_VENDOR_ATTR_NAN_CMD_DATA = 1,

	/* Indicates the type of NAN command sent with

	 * QCA_NL80211_VENDOR_SUBCMD_NAN_EXT. enum qca_wlan_nan_ext_subcmd_type

	 * describes the possible range of values. This attribute is mandatory

	 * if the command being issued is either

	 * QCA_WLAN_NAN_EXT_SUBCMD_TYPE_ENABLE_REQ or

	 * QCA_WLAN_NAN_EXT_SUBCMD_TYPE_DISABLE_REQ. NLA_U32 attribute.

	 */

	QCA_WLAN_VENDOR_ATTR_NAN_SUBCMD_TYPE = 2,

	/* Frequency (in MHz) of primary NAN discovery social channel in 2.4 GHz

	 * band. This attribute is mandatory when command type is

	 * QCA_WLAN_NAN_EXT_SUBCMD_TYPE_ENABLE_REQ. NLA_U32 attribute.

	 */

	QCA_WLAN_VENDOR_ATTR_NAN_DISC_24GHZ_BAND_FREQ = 3,

	/* Frequency (in MHz) of secondary NAN discovery social channel in 5 GHz

	 * band. This attribute is optional and should be included when command

	 * type is QCA_WLAN_NAN_EXT_SUBCMD_TYPE_ENABLE_REQ and NAN discovery

	 * has to be started on 5GHz along with 2.4GHz. NLA_U32 attribute.

	 */

	QCA_WLAN_VENDOR_ATTR_NAN_DISC_5GHZ_BAND_FREQ = 4,



	/* keep last */

	QCA_WLAN_VENDOR_ATTR_NAN_PARAMS_AFTER_LAST,

	QCA_WLAN_VENDOR_ATTR_NAN_PARAMS_MAX =

		QCA_WLAN_VENDOR_ATTR_NAN_PARAMS_AFTER_LAST - 1

};



/**

 * enum qca_vendor_attr_peer_stats_cache_type - Represents peer stats cache type

 * This enum defines the valid set of values of peer stats cache types. These

 * values are used by attribute

 * %QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_TYPE_INVALID.

 *

 * @QCA_WLAN_VENDOR_ATTR_PEER_TX_RATE_STATS: Represents peer tx rate statistics.

 * @QCA_WLAN_VENDOR_ATTR_PEER_RX_RATE_STATS: Represents peer rx rate statistics.

 * @QCA_WLAN_VENDOR_ATTR_PEER_TX_SOJOURN_STATS: Represents peer tx sojourn

 * statistics

 */

enum qca_vendor_attr_peer_stats_cache_type {

	QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_TYPE_INVALID = 0,



	QCA_WLAN_VENDOR_ATTR_PEER_TX_RATE_STATS,

	QCA_WLAN_VENDOR_ATTR_PEER_RX_RATE_STATS,

	QCA_WLAN_VENDOR_ATTR_PEER_TX_SOJOURN_STATS,

};



/**

 * enum qca_wlan_vendor_attr_peer_stats_cache_params - This enum defines

 * attributes required for QCA_NL80211_VENDOR_SUBCMD_PEER_STATS_CACHE_FLUSH

 * Attributes are required to flush peer rate statistics from driver to

 * user application.

 *

 * @QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_TYPE: Unsigned 32-bit attribute

 * Indicate peer stats cache type.

 * The statistics types are 32-bit values from

 * qca_vendor_attr_peer_stats_cache_type

 * @QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_PEER_MAC: Unsigned 8-bit array

 * of size 6, representing peer mac address.

 * @QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_DATA: Opaque data attribute

 * containing buffer of statistics to send event to application layer entity.

 * @QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_PEER_COOKIE: Unsigned 64-bit attribute

 * representing cookie for peer unique session.

 */

enum qca_wlan_vendor_attr_peer_stats_cache_params {

	QCA_WLAN_VENDOR_ATTR_PEER_STATS_INVALID = 0,



	QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_TYPE = 1,

	QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_PEER_MAC = 2,

	QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_DATA = 3,

	QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_PEER_COOKIE = 4,



	/* Keep last */

	QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_LAST,

	QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_MAX =

		QCA_WLAN_VENDOR_ATTR_PEER_STATS_CACHE_LAST - 1

};



/**

 * enum qca_mpta_helper_attr_zigbee_state - current states of zegbee.

 * this enum defines all the possible state of zigbee, which can be

 * delivered by NetLink attribute QCA_MPTA_HELPER_VENDOR_ATTR_ZIGBEE_STATE.

 *

 * @ZIGBEE_IDLE: zigbee in idle state

 * @ZIGBEE_FORM_NETWORK: zibee forming network

 * @ZIGBEE_WAIT_JOIN: zigbee waiting for joining network

 * @ZIGBEE_JOIN: zigbee joining network

 * @ZIGBEE_NETWORK_UP: zigbee network is up

 * @ZIGBEE_HMI: zigbee in HMI mode

 */

enum qca_mpta_helper_attr_zigbee_state {

	ZIGBEE_IDLE = 0,

	ZIGBEE_FORM_NETWORK = 1,

	ZIGBEE_WAIT_JOIN = 2,

	ZIGBEE_JOIN = 3,

	ZIGBEE_NETWORK_UP = 4,

	ZIGBEE_HMI = 5,

};



/**

 * enum qca_mpta_helper_vendor_attr - used for NL attributes sent by

 * vendor sub-command QCA_NL80211_VENDOR_SUBCMD_MPTA_HELPER_CONFIG.

 */

enum qca_mpta_helper_vendor_attr {

	QCA_MPTA_HELPER_VENDOR_ATTR_INVALID = 0,

	/* Optional attribute used to update zigbee state.

	 * enum qca_mpta_helper_attr_zigbee_state.

	 * NLA_U32 attribute.

	 */

	QCA_MPTA_HELPER_VENDOR_ATTR_ZIGBEE_STATE = 1,

	/* Optional attribute used to configure wlan duration for Shape-OCS

	 * during interrupt.

	 * Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_INT_NON_WLAN_DURATION.

	 * Value range 0 ~ 300 (ms).

	 * NLA_U32 attribute.

	 */

	QCA_MPTA_HELPER_VENDOR_ATTR_INT_WLAN_DURATION = 2,

	/* Optional attribute used to configure non wlan duration for Shape-OCS

	 * during interrupt.

	 * Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_INT_WLAN_DURATION.

	 * Value range 0 ~ 300 (ms).

	 * NLA_U32 attribute.

	 */

	QCA_MPTA_HELPER_VENDOR_ATTR_INT_NON_WLAN_DURATION = 3,

	/* Optional attribute used to configure wlan duration for Shape-OCS

	 * monitor period.

	 * Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_MON_NON_WLAN_DURATION.

	 * Value range 0 ~ 300 (ms)

	 * NLA_U32 attribute

	 */

	QCA_MPTA_HELPER_VENDOR_ATTR_MON_WLAN_DURATION = 4,

	/* Optional attribute used to configure non wlan duration for Shape-OCS

	 * monitor period.

	 * Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_MON_WLAN_DURATION.

	 * Value range 0 ~ 300 (ms)

	 * NLA_U32 attribute

	 */

	QCA_MPTA_HELPER_VENDOR_ATTR_MON_NON_WLAN_DURATION = 5,

	/* Optional attribute used to configure ocs interrupt duration.

	 * Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_MON_OCS_DURATION.

	 * Value range 1000 ~ 20000 (ms)

	 * NLA_U32 attribute

	 */

	QCA_MPTA_HELPER_VENDOR_ATTR_INT_OCS_DURATION = 6,

	/* Optional attribute used to configure ocs monitor duration.

	 * Set in pair with QCA_MPTA_HELPER_VENDOR_ATTR_INT_OCS_DURATION.

	 * Value range 1000 ~ 20000 (ms)

	 * NLA_U32 attribute

	 */

	QCA_MPTA_HELPER_VENDOR_ATTR_MON_OCS_DURATION = 7,

	/* Optional attribute used to notify wlan FW current zigbee channel.

	 * Value range 11 ~ 26

	 * NLA_U32 attribute

	 */

	QCA_MPTA_HELPER_VENDOR_ATTR_ZIGBEE_CHAN = 8,

	/* Optional attribute used to configure wlan mute duration.

	 * Value range 0 ~ 400 (ms)

	 * NLA_U32 attribute

	 */

	QCA_MPTA_HELPER_VENDOR_ATTR_WLAN_MUTE_DURATION = 9,



	/* keep last */

	QCA_MPTA_HELPER_VENDOR_ATTR_AFTER_LAST,

	QCA_MPTA_HELPER_VENDOR_ATTR_MAX =

		QCA_MPTA_HELPER_VENDOR_ATTR_AFTER_LAST - 1

};



#endif
 
#endif