Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 36a23fc8 authored by Paul Mackerras's avatar Paul Mackerras
Browse files

Merge branch 'powerpc-next' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc

parents 23386fe5 fc215fe7

arch/powerpc/kernel/cpu_setup_6xx.S

+7 −1
Original line number Diff line number Diff line
@@ -17,7 +17,13 @@ 
#include <asm/cache.h>



_GLOBAL(__setup_cpu_603)

	b	setup_common_caches

	mflr	r4

BEGIN_FTR_SECTION

	bl	__init_fpu_registers

END_FTR_SECTION_IFCLR(CPU_FTR_FPU_UNAVAILABLE)

	bl	setup_common_caches

	mtlr	r4

	blr

_GLOBAL(__setup_cpu_604)

	mflr	r4

	bl	setup_common_caches

arch/ppc/8260_io/fcc_enet.c

+1 −18
Original line number Diff line number Diff line
@@ -165,9 +165,6 @@ static int fcc_enet_set_mac_address(struct net_device *dev, void *addr); 
#ifdef CONFIG_SBC82xx

#define F1_RXCLK	9

#define F1_TXCLK	10

#elif defined(CONFIG_ADS8272)

#define F1_RXCLK	11

#define F1_TXCLK	10

#else

#define F1_RXCLK	12

#define F1_TXCLK	11
@@ -175,13 +172,8 @@ static int fcc_enet_set_mac_address(struct net_device *dev, void *addr); 


/* FCC2 Clock Source Configuration.  There are board specific.

   Can only choose from CLK13-16 */

#ifdef CONFIG_ADS8272

#define F2_RXCLK	15

#define F2_TXCLK	16

#else

#define F2_RXCLK	13

#define F2_TXCLK	14

#endif



/* FCC3 Clock Source Configuration.  There are board specific.

   Can only choose from CLK13-16 */
@@ -289,10 +281,7 @@ static int fcc_enet_set_mac_address(struct net_device *dev, void *addr); 
/* TQM8260 has MDIO and MDCK on PC30 and PC31 respectively */

#define PC_MDIO		((uint)0x00000002)

#define PC_MDCK		((uint)0x00000001)

#elif defined(CONFIG_ADS8272)

#define PC_MDIO		((uint)0x00002000)

#define PC_MDCK		((uint)0x00001000)

#elif defined(CONFIG_EST8260) || defined(CONFIG_ADS8260) || defined(CONFIG_PQ2FADS)

#elif defined(CONFIG_EST8260) || defined(CONFIG_ADS8260)

#define PC_MDIO		((uint)0x00400000)

#define PC_MDCK		((uint)0x00200000)

#else
@@ -2118,11 +2107,6 @@ init_fcc_startup(fcc_info_t *fip, struct net_device *dev) 
		printk("Can't get FCC IRQ %d\n", fip->fc_interrupt);



#ifdef	PHY_INTERRUPT

#ifdef CONFIG_ADS8272

	if (request_irq(PHY_INTERRUPT, mii_link_interrupt, IRQF_SHARED,

				"mii", dev) < 0)

		printk(KERN_CRIT "Can't get MII IRQ %d\n", PHY_INTERRUPT);

#else

	/* Make IRQn edge triggered.  This does not work if PHY_INTERRUPT is

	 * on Port C.

	 */
@@ -2132,7 +2116,6 @@ init_fcc_startup(fcc_info_t *fip, struct net_device *dev) 
	if (request_irq(PHY_INTERRUPT, mii_link_interrupt, 0,

							"mii", dev) < 0)

		printk(KERN_CRIT "Can't get MII IRQ %d\n", PHY_INTERRUPT);

#endif

#endif	/* PHY_INTERRUPT */



	/* Set GFMR to enable Ethernet operating mode.

arch/ppc/8xx_io/enet.c

+0 −23
Original line number Diff line number Diff line
@@ -946,29 +946,6 @@ static int __init scc_enet_init(void) 
	*((volatile uint *)BCSR1) &= ~BCSR1_ETHEN;

#endif



#ifdef CONFIG_MPC885ADS



	/* Deassert PHY reset and enable the PHY.

	 */

	{

		volatile uint __iomem *bcsr = ioremap(BCSR_ADDR, BCSR_SIZE);

		uint tmp;



		tmp = in_be32(bcsr + 1 /* BCSR1 */);

		tmp |= BCSR1_ETHEN;

		out_be32(bcsr + 1, tmp);

		tmp = in_be32(bcsr + 4 /* BCSR4 */);

		tmp |= BCSR4_ETH10_RST;

		out_be32(bcsr + 4, tmp);

		iounmap(bcsr);

	}



	/* On MPC885ADS SCC ethernet PHY defaults to the full duplex mode

	 * upon reset. SCC is set to half duplex by default. So this

	 * inconsistency should be better fixed by the software.

	 */

#endif



	dev->base_addr = (unsigned long)ep;

#if 0

	dev->name = "CPM_ENET";

arch/ppc/Kconfig

+1 −81
Original line number Diff line number Diff line
@@ -372,22 +372,6 @@ config MPC8XXFADS 
	bool "FADS"

	select FADS



config MPC86XADS

	bool "MPC86XADS"

	help

	  MPC86x Application Development System by Freescale Semiconductor.

	  The MPC86xADS is meant to serve as a platform for s/w and h/w

	  development around the MPC86X processor families.

	select FADS



config MPC885ADS

	bool "MPC885ADS"

	help

	  Freescale Semiconductor MPC885 Application Development System (ADS).

	  Also known as DUET.

	  The MPC885ADS is meant to serve as a platform for s/w and h/w

	  development around the MPC885 processor family.



config TQM823L

	bool "TQM823L"

	help
@@ -479,53 +463,6 @@ config WINCEPT 


endchoice



menu "Freescale Ethernet driver platform-specific options"

	depends on FS_ENET



	config MPC8xx_SECOND_ETH

	bool "Second Ethernet channel"

	depends on (MPC885ADS || MPC86XADS)

	default y

	help

	  This enables support for second Ethernet on MPC885ADS and MPC86xADS boards.

	  The latter will use SCC1, for 885ADS you can select it below.



	choice

		prompt "Second Ethernet channel"

		depends on MPC8xx_SECOND_ETH

		default MPC8xx_SECOND_ETH_FEC2



		config MPC8xx_SECOND_ETH_FEC2

		bool "FEC2"

		depends on MPC885ADS

		help

		  Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2

		  (often 2-nd UART) will not work if this is enabled.



		config MPC8xx_SECOND_ETH_SCC1

		bool "SCC1"

		depends on MPC86XADS

		select MPC8xx_SCC_ENET_FIXED

		help

		  Enable SCC1 to serve as 2-nd Ethernet channel. Note that SMC1

		  (often 1-nd UART) will not work if this is enabled.



		config MPC8xx_SECOND_ETH_SCC3

		bool "SCC3"

		depends on MPC885ADS

		help

		  Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1

		  (often 1-nd UART) will not work if this is enabled.



	endchoice



	config MPC8xx_SCC_ENET_FIXED

	depends on MPC8xx_SECOND_ETH_SCC

	default n

	bool "Use fixed MII-less mode for SCC Ethernet"



endmenu



choice

	prompt "Machine Type"

	depends on 6xx
@@ -666,9 +603,6 @@ config TQM8260 
	  End of Life: not yet :-)

	  URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf>



config ADS8272

	bool "ADS8272"



config PQ2FADS

	bool "Freescale-PQ2FADS"

	help
@@ -698,11 +632,6 @@ config EV64360 
	  platform.

endchoice



config PQ2ADS

	bool

	depends on ADS8272

	default y



config TQM8xxL

	bool

	depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L)
@@ -725,15 +654,6 @@ config 8260 
	  this option means that you wish to build a kernel for a machine with

	  an 8260 class CPU.



config 8272

	bool

	depends on 6xx

	default y if ADS8272

	select 8260

	help

	  The MPC8272 CPM has a different internal dpram setup than other CPM2

	  devices



config CPM1

	bool

	depends on 8xx
@@ -1069,7 +989,7 @@ config PCI_8260 


config 8260_PCI9

	bool "Enable workaround for MPC826x erratum PCI 9"

	depends on PCI_8260 && !ADS8272

	depends on PCI_8260

	default y



choice

arch/ppc/configs/ads8272_defconfig

deleted100644 → 0
+0 −930
Original line number Diff line number Diff line 
#

# Automatically generated make config: don't edit

# Linux kernel version: 2.6.21-rc5

# Wed Apr  4 20:55:16 2007

#

CONFIG_MMU=y

CONFIG_GENERIC_HARDIRQS=y

CONFIG_RWSEM_XCHGADD_ALGORITHM=y

CONFIG_ARCH_HAS_ILOG2_U32=y

# CONFIG_ARCH_HAS_ILOG2_U64 is not set

CONFIG_GENERIC_HWEIGHT=y

CONFIG_GENERIC_CALIBRATE_DELAY=y

CONFIG_PPC=y

CONFIG_PPC32=y

CONFIG_GENERIC_NVRAM=y

CONFIG_GENERIC_FIND_NEXT_BIT=y

CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y

CONFIG_ARCH_MAY_HAVE_PC_FDC=y

CONFIG_GENERIC_BUG=y

CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"



#

# Code maturity level options

#

CONFIG_EXPERIMENTAL=y

CONFIG_BROKEN_ON_SMP=y

CONFIG_INIT_ENV_ARG_LIMIT=32



#

# General setup

#

CONFIG_LOCALVERSION=""

CONFIG_LOCALVERSION_AUTO=y

CONFIG_SWAP=y

CONFIG_SYSVIPC=y

# CONFIG_IPC_NS is not set

CONFIG_SYSVIPC_SYSCTL=y

# CONFIG_POSIX_MQUEUE is not set

# CONFIG_BSD_PROCESS_ACCT is not set

# CONFIG_TASKSTATS is not set

# CONFIG_UTS_NS is not set

# CONFIG_AUDIT is not set

# CONFIG_IKCONFIG is not set

CONFIG_SYSFS_DEPRECATED=y

# CONFIG_RELAY is not set

CONFIG_BLK_DEV_INITRD=y

CONFIG_INITRAMFS_SOURCE=""

# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set

CONFIG_SYSCTL=y

CONFIG_EMBEDDED=y

CONFIG_SYSCTL_SYSCALL=y

# CONFIG_KALLSYMS is not set

# CONFIG_HOTPLUG is not set

CONFIG_PRINTK=y

CONFIG_BUG=y

CONFIG_ELF_CORE=y

CONFIG_BASE_FULL=y

CONFIG_FUTEX=y

# CONFIG_EPOLL is not set

CONFIG_SHMEM=y

CONFIG_SLAB=y

CONFIG_VM_EVENT_COUNTERS=y

CONFIG_RT_MUTEXES=y

# CONFIG_TINY_SHMEM is not set

CONFIG_BASE_SMALL=0

# CONFIG_SLOB is not set



#

# Loadable module support

#

# CONFIG_MODULES is not set



#

# Block layer

#

CONFIG_BLOCK=y

# CONFIG_LBD is not set

# CONFIG_BLK_DEV_IO_TRACE is not set

# CONFIG_LSF is not set



#

# IO Schedulers

#

CONFIG_IOSCHED_NOOP=y

CONFIG_IOSCHED_AS=y

CONFIG_IOSCHED_DEADLINE=y

CONFIG_IOSCHED_CFQ=y

# CONFIG_DEFAULT_AS is not set

# CONFIG_DEFAULT_DEADLINE is not set

CONFIG_DEFAULT_CFQ=y

# CONFIG_DEFAULT_NOOP is not set

CONFIG_DEFAULT_IOSCHED="cfq"



#

# Processor

#

CONFIG_6xx=y

# CONFIG_40x is not set

# CONFIG_44x is not set

# CONFIG_8xx is not set

# CONFIG_E200 is not set

# CONFIG_E500 is not set

CONFIG_PPC_FPU=y

# CONFIG_PPC_DCR_NATIVE is not set

# CONFIG_KEXEC is not set

# CONFIG_CPU_FREQ is not set

# CONFIG_WANT_EARLY_SERIAL is not set

CONFIG_EMBEDDEDBOOT=y

CONFIG_PPC_STD_MMU=y



#

# Platform options

#



#

# Freescale Ethernet driver platform-specific options

#

# CONFIG_PPC_PREP is not set

# CONFIG_APUS is not set

# CONFIG_KATANA is not set

# CONFIG_WILLOW is not set

# CONFIG_CPCI690 is not set

# CONFIG_POWERPMC250 is not set

# CONFIG_CHESTNUT is not set

# CONFIG_SPRUCE is not set

# CONFIG_HDPU is not set

# CONFIG_EV64260 is not set

# CONFIG_LOPEC is not set

# CONFIG_MVME5100 is not set

# CONFIG_PPLUS is not set

# CONFIG_PRPMC750 is not set

# CONFIG_PRPMC800 is not set

# CONFIG_SANDPOINT is not set

# CONFIG_RADSTONE_PPC7D is not set

# CONFIG_PAL4 is not set

# CONFIG_EST8260 is not set

# CONFIG_SBC82xx is not set

# CONFIG_SBS8260 is not set

# CONFIG_RPX8260 is not set

# CONFIG_TQM8260 is not set

CONFIG_ADS8272=y

# CONFIG_PQ2FADS is not set

# CONFIG_LITE5200 is not set

# CONFIG_MPC834x_SYS is not set

# CONFIG_EV64360 is not set

CONFIG_PQ2ADS=y

CONFIG_8260=y

CONFIG_8272=y

CONFIG_CPM2=y

# CONFIG_PC_KEYBOARD is not set

# CONFIG_SMP is not set

# CONFIG_HIGHMEM is not set

CONFIG_ARCH_POPULATES_NODE_MAP=y

# CONFIG_HZ_100 is not set

CONFIG_HZ_250=y

# CONFIG_HZ_300 is not set

# CONFIG_HZ_1000 is not set

CONFIG_HZ=250

CONFIG_PREEMPT_NONE=y

# CONFIG_PREEMPT_VOLUNTARY is not set

# CONFIG_PREEMPT is not set

CONFIG_SELECT_MEMORY_MODEL=y

CONFIG_FLATMEM_MANUAL=y

# CONFIG_DISCONTIGMEM_MANUAL is not set

# CONFIG_SPARSEMEM_MANUAL is not set

CONFIG_FLATMEM=y

CONFIG_FLAT_NODE_MEM_MAP=y

# CONFIG_SPARSEMEM_STATIC is not set

CONFIG_SPLIT_PTLOCK_CPUS=4

# CONFIG_RESOURCES_64BIT is not set

CONFIG_ZONE_DMA_FLAG=1

CONFIG_BINFMT_ELF=y

# CONFIG_BINFMT_MISC is not set

# CONFIG_CMDLINE_BOOL is not set

# CONFIG_PM is not set

CONFIG_SECCOMP=y

CONFIG_ISA_DMA_API=y



#

# Bus options

#

CONFIG_ZONE_DMA=y

# CONFIG_PPC_I8259 is not set

CONFIG_PPC_INDIRECT_PCI=y

CONFIG_PCI=y

CONFIG_PCI_DOMAINS=y

CONFIG_PCI_8260=y



#

# PCCARD (PCMCIA/CardBus) support

#



#

# Advanced setup

#

# CONFIG_ADVANCED_OPTIONS is not set



#

# Default settings for advanced configuration options are used

#

CONFIG_HIGHMEM_START=0xfe000000

CONFIG_LOWMEM_SIZE=0x30000000

CONFIG_KERNEL_START=0xc0000000

CONFIG_TASK_SIZE=0x80000000

CONFIG_BOOT_LOAD=0x00400000



#

# Networking

#

CONFIG_NET=y



#

# Networking options

#

# CONFIG_NETDEBUG is not set

CONFIG_PACKET=y

# CONFIG_PACKET_MMAP is not set

CONFIG_UNIX=y

CONFIG_XFRM=y

# CONFIG_XFRM_USER is not set

# CONFIG_XFRM_SUB_POLICY is not set

# CONFIG_XFRM_MIGRATE is not set

# CONFIG_NET_KEY is not set

CONFIG_INET=y

CONFIG_IP_MULTICAST=y

# CONFIG_IP_ADVANCED_ROUTER is not set

CONFIG_IP_FIB_HASH=y

CONFIG_IP_PNP=y

CONFIG_IP_PNP_DHCP=y

CONFIG_IP_PNP_BOOTP=y

# CONFIG_IP_PNP_RARP is not set

# CONFIG_NET_IPIP is not set

# CONFIG_NET_IPGRE is not set

# CONFIG_IP_MROUTE is not set

# CONFIG_ARPD is not set

CONFIG_SYN_COOKIES=y

# CONFIG_INET_AH is not set

# CONFIG_INET_ESP is not set

# CONFIG_INET_IPCOMP is not set

# CONFIG_INET_XFRM_TUNNEL is not set

# CONFIG_INET_TUNNEL is not set

CONFIG_INET_XFRM_MODE_TRANSPORT=y

CONFIG_INET_XFRM_MODE_TUNNEL=y

CONFIG_INET_XFRM_MODE_BEET=y

CONFIG_INET_DIAG=y

CONFIG_INET_TCP_DIAG=y

# CONFIG_TCP_CONG_ADVANCED is not set

CONFIG_TCP_CONG_CUBIC=y

CONFIG_DEFAULT_TCP_CONG="cubic"

# CONFIG_TCP_MD5SIG is not set

# CONFIG_IPV6 is not set

# CONFIG_INET6_XFRM_TUNNEL is not set

# CONFIG_INET6_TUNNEL is not set

# CONFIG_NETWORK_SECMARK is not set

# CONFIG_NETFILTER is not set



#

# DCCP Configuration (EXPERIMENTAL)

#

# CONFIG_IP_DCCP is not set



#

# SCTP Configuration (EXPERIMENTAL)

#

# CONFIG_IP_SCTP is not set



#

# TIPC Configuration (EXPERIMENTAL)

#

# CONFIG_TIPC is not set

# CONFIG_ATM is not set

# CONFIG_BRIDGE is not set

# CONFIG_VLAN_8021Q is not set

# CONFIG_DECNET is not set

# CONFIG_LLC2 is not set

# CONFIG_IPX is not set

# CONFIG_ATALK is not set

# CONFIG_X25 is not set

# CONFIG_LAPB is not set

# CONFIG_ECONET is not set

# CONFIG_WAN_ROUTER is not set



#

# QoS and/or fair queueing

#

# CONFIG_NET_SCHED is not set



#

# Network testing

#

# CONFIG_NET_PKTGEN is not set

# CONFIG_HAMRADIO is not set

# CONFIG_IRDA is not set

# CONFIG_BT is not set

# CONFIG_IEEE80211 is not set



#

# Device Drivers

#



#

# Generic Driver Options

#

CONFIG_STANDALONE=y

CONFIG_PREVENT_FIRMWARE_BUILD=y

# CONFIG_SYS_HYPERVISOR is not set



#

# Connector - unified userspace <-> kernelspace linker

#

# CONFIG_CONNECTOR is not set



#

# Memory Technology Devices (MTD)

#

# CONFIG_MTD is not set



#

# Parallel port support

#

# CONFIG_PARPORT is not set



#

# Plug and Play support

#

# CONFIG_PNPACPI is not set



#

# Block devices

#

# CONFIG_BLK_DEV_FD is not set

# CONFIG_BLK_CPQ_DA is not set

# CONFIG_BLK_CPQ_CISS_DA is not set

# CONFIG_BLK_DEV_DAC960 is not set

# CONFIG_BLK_DEV_UMEM is not set

# CONFIG_BLK_DEV_COW_COMMON is not set

CONFIG_BLK_DEV_LOOP=y

# CONFIG_BLK_DEV_CRYPTOLOOP is not set

# CONFIG_BLK_DEV_NBD is not set

# CONFIG_BLK_DEV_SX8 is not set

CONFIG_BLK_DEV_RAM=y

CONFIG_BLK_DEV_RAM_COUNT=16

CONFIG_BLK_DEV_RAM_SIZE=32768

CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024

# CONFIG_CDROM_PKTCDVD is not set

# CONFIG_ATA_OVER_ETH is not set



#

# Misc devices

#

# CONFIG_SGI_IOC4 is not set

# CONFIG_TIFM_CORE is not set



#

# ATA/ATAPI/MFM/RLL support

#

# CONFIG_IDE is not set



#

# SCSI device support

#

# CONFIG_RAID_ATTRS is not set

# CONFIG_SCSI is not set

# CONFIG_SCSI_NETLINK is not set



#

# Serial ATA (prod) and Parallel ATA (experimental) drivers

#

# CONFIG_ATA is not set



#

# Multi-device support (RAID and LVM)

#

# CONFIG_MD is not set



#

# Fusion MPT device support

#

# CONFIG_FUSION is not set



#

# IEEE 1394 (FireWire) support

#

# CONFIG_IEEE1394 is not set



#

# I2O device support

#

# CONFIG_I2O is not set



#

# Macintosh device drivers

#

# CONFIG_MAC_EMUMOUSEBTN is not set

# CONFIG_WINDFARM is not set



#

# Network device support

#

CONFIG_NETDEVICES=y

# CONFIG_DUMMY is not set

# CONFIG_BONDING is not set

# CONFIG_EQUALIZER is not set

# CONFIG_TUN is not set



#

# ARCnet devices

#

# CONFIG_ARCNET is not set



#

# PHY device support

#

CONFIG_PHYLIB=y



#

# MII PHY device drivers

#

# CONFIG_MARVELL_PHY is not set

CONFIG_DAVICOM_PHY=y

# CONFIG_QSEMI_PHY is not set

# CONFIG_LXT_PHY is not set

# CONFIG_CICADA_PHY is not set

# CONFIG_VITESSE_PHY is not set

# CONFIG_SMSC_PHY is not set

# CONFIG_BROADCOM_PHY is not set

# CONFIG_FIXED_PHY is not set



#

# Ethernet (10 or 100Mbit)

#

CONFIG_NET_ETHERNET=y

CONFIG_MII=y

# CONFIG_HAPPYMEAL is not set

# CONFIG_SUNGEM is not set

# CONFIG_CASSINI is not set

# CONFIG_NET_VENDOR_3COM is not set



#

# Tulip family network device support

#

# CONFIG_NET_TULIP is not set

# CONFIG_HP100 is not set

# CONFIG_NET_PCI is not set

CONFIG_FS_ENET=y

# CONFIG_FS_ENET_HAS_SCC is not set

CONFIG_FS_ENET_HAS_FCC=y



#

# Ethernet (1000 Mbit)

#

# CONFIG_ACENIC is not set

# CONFIG_DL2K is not set

# CONFIG_E1000 is not set

# CONFIG_NS83820 is not set

# CONFIG_HAMACHI is not set

# CONFIG_YELLOWFIN is not set

# CONFIG_R8169 is not set

# CONFIG_SIS190 is not set

# CONFIG_SKGE is not set

# CONFIG_SKY2 is not set

# CONFIG_SK98LIN is not set

# CONFIG_TIGON3 is not set

# CONFIG_BNX2 is not set

# CONFIG_QLA3XXX is not set

# CONFIG_ATL1 is not set



#

# Ethernet (10000 Mbit)

#

# CONFIG_CHELSIO_T1 is not set

# CONFIG_CHELSIO_T3 is not set

# CONFIG_IXGB is not set

# CONFIG_S2IO is not set

# CONFIG_MYRI10GE is not set

# CONFIG_NETXEN_NIC is not set



#

# Token Ring devices

#

# CONFIG_TR is not set



#

# Wireless LAN (non-hamradio)

#

# CONFIG_NET_RADIO is not set



#

# Wan interfaces

#

# CONFIG_WAN is not set

# CONFIG_FDDI is not set

# CONFIG_HIPPI is not set

# CONFIG_PPP is not set

# CONFIG_SLIP is not set

# CONFIG_SHAPER is not set

# CONFIG_NETCONSOLE is not set

# CONFIG_NETPOLL is not set

# CONFIG_NET_POLL_CONTROLLER is not set



#

# ISDN subsystem

#

# CONFIG_ISDN is not set



#

# Telephony Support

#

# CONFIG_PHONE is not set



#

# Input device support

#

CONFIG_INPUT=y

# CONFIG_INPUT_FF_MEMLESS is not set



#

# Userland interfaces

#

# CONFIG_INPUT_MOUSEDEV is not set

# CONFIG_INPUT_JOYDEV is not set

# CONFIG_INPUT_TSDEV is not set

# CONFIG_INPUT_EVDEV is not set

# CONFIG_INPUT_EVBUG is not set



#

# Input Device Drivers

#

# CONFIG_INPUT_KEYBOARD is not set

# CONFIG_INPUT_MOUSE is not set

# CONFIG_INPUT_JOYSTICK is not set

# CONFIG_INPUT_TOUCHSCREEN is not set

# CONFIG_INPUT_MISC is not set



#

# Hardware I/O ports

#

# CONFIG_SERIO is not set

# CONFIG_GAMEPORT is not set



#

# Character devices

#

# CONFIG_VT is not set

# CONFIG_SERIAL_NONSTANDARD is not set



#

# Serial drivers

#

# CONFIG_SERIAL_8250 is not set



#

# Non-8250 serial port support

#

# CONFIG_SERIAL_UARTLITE is not set

CONFIG_SERIAL_CORE=y

CONFIG_SERIAL_CORE_CONSOLE=y

CONFIG_SERIAL_CPM=y

CONFIG_SERIAL_CPM_CONSOLE=y

CONFIG_SERIAL_CPM_SCC1=y

# CONFIG_SERIAL_CPM_SCC2 is not set

# CONFIG_SERIAL_CPM_SCC3 is not set

CONFIG_SERIAL_CPM_SCC4=y

# CONFIG_SERIAL_CPM_SMC1 is not set

# CONFIG_SERIAL_CPM_SMC2 is not set

# CONFIG_SERIAL_JSM is not set

CONFIG_UNIX98_PTYS=y

CONFIG_LEGACY_PTYS=y

CONFIG_LEGACY_PTY_COUNT=256



#

# IPMI

#

# CONFIG_IPMI_HANDLER is not set



#

# Watchdog Cards

#

# CONFIG_WATCHDOG is not set

CONFIG_HW_RANDOM=y

# CONFIG_NVRAM is not set

CONFIG_GEN_RTC=y

# CONFIG_GEN_RTC_X is not set

# CONFIG_DTLK is not set

# CONFIG_R3964 is not set

# CONFIG_APPLICOM is not set

# CONFIG_AGP is not set

# CONFIG_DRM is not set

# CONFIG_RAW_DRIVER is not set



#

# TPM devices

#

# CONFIG_TCG_TPM is not set



#

# I2C support

#

# CONFIG_I2C is not set



#

# SPI support

#

# CONFIG_SPI is not set

# CONFIG_SPI_MASTER is not set



#

# Dallas's 1-wire bus

#

# CONFIG_W1 is not set



#

# Hardware Monitoring support

#

CONFIG_HWMON=y

# CONFIG_HWMON_VID is not set

# CONFIG_SENSORS_ABITUGURU is not set

# CONFIG_SENSORS_F71805F is not set

# CONFIG_SENSORS_PC87427 is not set

# CONFIG_SENSORS_VT1211 is not set

# CONFIG_HWMON_DEBUG_CHIP is not set



#

# Multifunction device drivers

#

# CONFIG_MFD_SM501 is not set



#

# Multimedia devices

#

# CONFIG_VIDEO_DEV is not set



#

# Digital Video Broadcasting Devices

#

# CONFIG_DVB is not set



#

# Graphics support

#

# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

# CONFIG_FB is not set

# CONFIG_FB_IBM_GXT4500 is not set



#

# Sound

#

# CONFIG_SOUND is not set



#

# HID Devices

#

CONFIG_HID=y

# CONFIG_HID_DEBUG is not set



#

# USB support

#

CONFIG_USB_ARCH_HAS_HCD=y

CONFIG_USB_ARCH_HAS_OHCI=y

CONFIG_USB_ARCH_HAS_EHCI=y

# CONFIG_USB is not set



#

# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'

#



#

# USB Gadget Support

#

# CONFIG_USB_GADGET is not set



#

# MMC/SD Card support

#

# CONFIG_MMC is not set



#

# LED devices

#

# CONFIG_NEW_LEDS is not set



#

# LED drivers

#



#

# LED Triggers

#



#

# InfiniBand support

#

# CONFIG_INFINIBAND is not set



#

# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)

#



#

# Real Time Clock

#

# CONFIG_RTC_CLASS is not set



#

# DMA Engine support

#

# CONFIG_DMA_ENGINE is not set



#

# DMA Clients

#



#

# DMA Devices

#



#

# Auxiliary Display support

#



#

# Virtualization

#



#

# File systems

#

CONFIG_EXT2_FS=y

# CONFIG_EXT2_FS_XATTR is not set

# CONFIG_EXT2_FS_XIP is not set

CONFIG_EXT3_FS=y

CONFIG_EXT3_FS_XATTR=y

# CONFIG_EXT3_FS_POSIX_ACL is not set

# CONFIG_EXT3_FS_SECURITY is not set

# CONFIG_EXT4DEV_FS is not set

CONFIG_JBD=y

# CONFIG_JBD_DEBUG is not set

CONFIG_FS_MBCACHE=y

# CONFIG_REISERFS_FS is not set

# CONFIG_JFS_FS is not set

CONFIG_FS_POSIX_ACL=y

# CONFIG_XFS_FS is not set

# CONFIG_GFS2_FS is not set

# CONFIG_OCFS2_FS is not set

# CONFIG_MINIX_FS is not set

# CONFIG_ROMFS_FS is not set

CONFIG_INOTIFY=y

CONFIG_INOTIFY_USER=y

# CONFIG_QUOTA is not set

CONFIG_DNOTIFY=y

# CONFIG_AUTOFS_FS is not set

# CONFIG_AUTOFS4_FS is not set

# CONFIG_FUSE_FS is not set



#

# CD-ROM/DVD Filesystems

#

# CONFIG_ISO9660_FS is not set

# CONFIG_UDF_FS is not set



#

# DOS/FAT/NT Filesystems

#

# CONFIG_MSDOS_FS is not set

# CONFIG_VFAT_FS is not set

# CONFIG_NTFS_FS is not set



#

# Pseudo filesystems

#

CONFIG_PROC_FS=y

CONFIG_PROC_KCORE=y

CONFIG_PROC_SYSCTL=y

CONFIG_SYSFS=y

CONFIG_TMPFS=y

# CONFIG_TMPFS_POSIX_ACL is not set

# CONFIG_HUGETLB_PAGE is not set

CONFIG_RAMFS=y

# CONFIG_CONFIGFS_FS is not set



#

# Miscellaneous filesystems

#

# CONFIG_ADFS_FS is not set

# CONFIG_AFFS_FS is not set

# CONFIG_HFS_FS is not set

# CONFIG_HFSPLUS_FS is not set

# CONFIG_BEFS_FS is not set

# CONFIG_BFS_FS is not set

# CONFIG_EFS_FS is not set

# CONFIG_CRAMFS is not set

# CONFIG_VXFS_FS is not set

# CONFIG_HPFS_FS is not set

# CONFIG_QNX4FS_FS is not set

# CONFIG_SYSV_FS is not set

# CONFIG_UFS_FS is not set



#

# Network File Systems

#

CONFIG_NFS_FS=y

CONFIG_NFS_V3=y

CONFIG_NFS_V3_ACL=y

CONFIG_NFS_V4=y

# CONFIG_NFS_DIRECTIO is not set

# CONFIG_NFSD is not set

CONFIG_ROOT_NFS=y

CONFIG_LOCKD=y

CONFIG_LOCKD_V4=y

CONFIG_NFS_ACL_SUPPORT=y

CONFIG_NFS_COMMON=y

CONFIG_SUNRPC=y

CONFIG_SUNRPC_GSS=y

CONFIG_RPCSEC_GSS_KRB5=y

# CONFIG_RPCSEC_GSS_SPKM3 is not set

# CONFIG_SMB_FS is not set

# CONFIG_CIFS is not set

# CONFIG_NCP_FS is not set

# CONFIG_CODA_FS is not set

# CONFIG_AFS_FS is not set

# CONFIG_9P_FS is not set



#

# Partition Types

#

CONFIG_PARTITION_ADVANCED=y

# CONFIG_ACORN_PARTITION is not set

# CONFIG_OSF_PARTITION is not set

# CONFIG_AMIGA_PARTITION is not set

# CONFIG_ATARI_PARTITION is not set

# CONFIG_MAC_PARTITION is not set

# CONFIG_MSDOS_PARTITION is not set

# CONFIG_LDM_PARTITION is not set

# CONFIG_SGI_PARTITION is not set

# CONFIG_ULTRIX_PARTITION is not set

# CONFIG_SUN_PARTITION is not set

# CONFIG_KARMA_PARTITION is not set

# CONFIG_EFI_PARTITION is not set



#

# Native Language Support

#

# CONFIG_NLS is not set



#

# Distributed Lock Manager

#

# CONFIG_DLM is not set

# CONFIG_SCC_ENET is not set

# CONFIG_FEC_ENET is not set



#

# CPM2 Options

#



#

# Library routines

#

# CONFIG_CRC_CCITT is not set

# CONFIG_CRC16 is not set

# CONFIG_CRC32 is not set

# CONFIG_LIBCRC32C is not set

CONFIG_PLIST=y

CONFIG_HAS_IOMEM=y

CONFIG_HAS_IOPORT=y

# CONFIG_PROFILING is not set



#

# Kernel hacking

#

# CONFIG_PRINTK_TIME is not set

CONFIG_ENABLE_MUST_CHECK=y

# CONFIG_MAGIC_SYSRQ is not set

# CONFIG_UNUSED_SYMBOLS is not set

# CONFIG_DEBUG_FS is not set

# CONFIG_HEADERS_CHECK is not set

# CONFIG_DEBUG_KERNEL is not set

CONFIG_LOG_BUF_SHIFT=14

# CONFIG_DEBUG_BUGVERBOSE is not set

# CONFIG_KGDB_CONSOLE is not set



#

# Security options

#

# CONFIG_KEYS is not set

# CONFIG_SECURITY is not set



#

# Cryptographic options

#

CONFIG_CRYPTO=y

CONFIG_CRYPTO_ALGAPI=y

CONFIG_CRYPTO_BLKCIPHER=y

CONFIG_CRYPTO_MANAGER=y

# CONFIG_CRYPTO_HMAC is not set

# CONFIG_CRYPTO_XCBC is not set

# CONFIG_CRYPTO_NULL is not set

# CONFIG_CRYPTO_MD4 is not set

CONFIG_CRYPTO_MD5=y

# CONFIG_CRYPTO_SHA1 is not set

# CONFIG_CRYPTO_SHA256 is not set

# CONFIG_CRYPTO_SHA512 is not set

# CONFIG_CRYPTO_WP512 is not set

# CONFIG_CRYPTO_TGR192 is not set

# CONFIG_CRYPTO_GF128MUL is not set

CONFIG_CRYPTO_ECB=y

CONFIG_CRYPTO_CBC=y

CONFIG_CRYPTO_PCBC=y

# CONFIG_CRYPTO_LRW is not set

CONFIG_CRYPTO_DES=y

# CONFIG_CRYPTO_FCRYPT is not set

# CONFIG_CRYPTO_BLOWFISH is not set

# CONFIG_CRYPTO_TWOFISH is not set

# CONFIG_CRYPTO_SERPENT is not set

# CONFIG_CRYPTO_AES is not set

# CONFIG_CRYPTO_CAST5 is not set

# CONFIG_CRYPTO_CAST6 is not set

# CONFIG_CRYPTO_TEA is not set

# CONFIG_CRYPTO_ARC4 is not set

# CONFIG_CRYPTO_KHAZAD is not set

# CONFIG_CRYPTO_ANUBIS is not set

# CONFIG_CRYPTO_DEFLATE is not set

# CONFIG_CRYPTO_MICHAEL_MIC is not set

# CONFIG_CRYPTO_CRC32C is not set

# CONFIG_CRYPTO_CAMELLIA is not set



#

# Hardware crypto devices

#