ARM: dts: imx: Add support for Advantech/GE Bx50v3

/*

 * Copyright 2015 Timesys Corporation.

 * Copyright 2015 General Electric Company

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This file is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License

 *     version 2 as published by the Free Software Foundation.

 *

 *     This file is distributed in the hope that it will be useful

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 * Or, alternatively

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */

#include "imx6q-ba16.dtsi"

/ {

	clocks {

		mclk: clock@0 {

			compatible = "fixed-clock";

			reg = <0>;

			#clock-cells = <0>;

			clock-frequency = <22000000>;

		};

	};

	reg_wl18xx_vmmc: regulator-wl18xx {

		compatible = "regulator-fixed";

		regulator-name = "vwl1807";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		gpio = <&pca9539 3 GPIO_ACTIVE_HIGH>;

		startup-delay-us = <70000>;

		enable-active-high;

	};

	reg_wlan: regulator-wlan {

		compatible = "regulator-fixed";

		regulator-name = "3P3V_wlan";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		regulator-always-on;

		regulator-boot-on;

		gpio = <&gpio6 14 GPIO_ACTIVE_HIGH>;

	};

	sound {

		compatible = "fsl,imx6q-ba16-sgtl5000",

			     "fsl,imx-audio-sgtl5000";

		model = "imx6q-ba16-sgtl5000";

		ssi-controller = <&ssi1>;

		audio-codec = <&sgtl5000>;

		audio-routing =

			"MIC_IN", "Mic Jack",

			"Mic Jack", "Mic Bias",

			"LINE_IN", "Line In Jack",

			"Headphone Jack", "HP_OUT";

		mux-int-port = <1>;

		mux-ext-port = <4>;

	};

};

&ecspi5 {

	fsl,spi-num-chipselects = <1>;

	cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_ecspi5>;

	status = "okay";

	m25_eeprom: m25p80@0 {

		compatible = "atmel,at25";

		spi-max-frequency = <20000000>;

		size = <0x8000>;

		pagesize = <64>;

		reg = <0>;

		address-width = <16>;

	};

};

&i2c1 {

	pca9547: mux@70 {

		compatible = "nxp,pca9547";

		reg = <0x70>;

		#address-cells = <1>;

		#size-cells = <0>;

		mux1_i2c1: i2c@0 {

			#address-cells = <1>;

			#size-cells = <0>;

			reg = <0x0>;

			ads7830: ads7830@48 {

				compatible = "ti,ads7830";

				reg = <0x48>;

			};

			mma8453: mma8453@1c {

				compatible = "fsl,mma8453";

				reg = <0x1c>;

			};

		};

		mux1_i2c2: i2c@1 {

			#address-cells = <1>;

			#size-cells = <0>;

			reg = <0x1>;

			eeprom: eeprom@50 {

				compatible = "atmel,24c08";

				reg = <0x50>;

			};

			mpl3115: mpl3115@60 {

				compatible = "fsl,mpl3115";

				reg = <0x60>;

			};

		};

		mux1_i2c3: i2c@2 {

			#address-cells = <1>;

			#size-cells = <0>;

			reg = <0x2>;

		};

		mux1_i2c4: i2c@3 {

			#address-cells = <1>;

			#size-cells = <0>;

			reg = <0x3>;

			sgtl5000: codec@0a {

				compatible = "fsl,sgtl5000";

				reg = <0x0a>;

				clocks = <&mclk>;

				VDDA-supply = <&reg_1p8v>;

				VDDIO-supply = <&reg_3p3v>;

			};

		};

		mux1_i2c5: i2c@4 {

			#address-cells = <1>;

			#size-cells = <0>;

			reg = <0x4>;

			pca9539: pca9539@74 {

				compatible = "nxp,pca9539";

				reg = <0x74>;

				gpio-controller;

				#gpio-cells = <2>;

				interrupt-controller;

				interrupt-parent = <&gpio2>;

				interrupts = <3 IRQ_TYPE_LEVEL_LOW>;

			};

		};

		mux1_i2c6: i2c@5 {

			#address-cells = <1>;

			#size-cells = <0>;

			reg = <0x5>;

		};

		mux1_i2c7: i2c@6 {

			#address-cells = <1>;

			#size-cells = <0>;

			reg = <0x6>;

		};

		mux1_i2c8: i2c@7 {

			#address-cells = <1>;

			#size-cells = <0>;

			reg = <0x7>;

		};

	};

};

&usdhc4 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_usdhc4>;

	bus-width = <4>;

	vmmc-supply = <&reg_wl18xx_vmmc>;

	no-1-8-v;

	non-removable;

	wakeup-source;

	keep-power-in-suspend;

	cap-power-off-card;

	max-frequency = <25000000>;

	#address-cells = <1>;

	#size-cells = <0>;

	status = "okay";

	wlcore: wlcore@2 {

		compatible = "ti,wl1837";

		reg = <2>;

		interrupt-parent = <&gpio2>;

		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;

		tcxo-clock-frequency = <26000000>;

	};

};