Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 1dc93416 authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files

ARM: debug-ll: reorder Kconfig alphanumerically 



The file has gotten a little out of sync, as platforms got
added in the wrong place, or have been renamed. This moves
the options around, but should not change any functionality.

Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parent 0045c0dd

arch/arm/Kconfig.debug

+141 −141
Original line number Diff line number Diff line
@@ -232,23 +232,6 @@ choice 
		  Say Y here if you want the debug print routines to direct

		  their output to UART0 serial port on DaVinci DMx devices.



	config DEBUG_ZYNQ_UART0

		bool "Kernel low-level debugging on Xilinx Zynq using UART0"

		depends on ARCH_ZYNQ

		help

		  Say Y here if you want the debug print routines to direct

		  their output to UART0 on the Zynq platform.



	config DEBUG_ZYNQ_UART1

		bool "Kernel low-level debugging on Xilinx Zynq using UART1"

		depends on ARCH_ZYNQ

		help

		  Say Y here if you want the debug print routines to direct

		  their output to UART1 on the Zynq platform.



		  If you have a ZC702 board and want early boot messages to

		  appear on the USB serial adaptor, select this option.



	config DEBUG_DC21285_PORT

		bool "Kernel low-level debugging messages via footbridge serial port"

		depends on FOOTBRIDGE
@@ -263,6 +246,20 @@ choice 
		  Say Y here if you want the debug print routines to direct

		  their output to the UA0 serial port in the CX92755.



	config DEBUG_LL_UART_EFM32

		bool "Kernel low-level debugging via efm32 UART"

		depends on ARCH_EFM32

		help

		  Say Y here if you want the debug print routines to direct

		  their output to an UART or USART port on efm32 based

		  machines. Use the following addresses for DEBUG_UART_PHYS:



		    0x4000c000 | USART0

		    0x4000c400 | USART1

		    0x4000c800 | USART2

		    0x4000e000 | UART0

		    0x4000e400 | UART1



	config DEBUG_EP93XX

		bool "Kernel low-level debugging messages via ep93xx UART"

		depends on ARCH_EP93XX
@@ -512,23 +509,6 @@ choice 
		  Say Y here if you want kernel low-level debugging support

		  on MMP UART3.



	config DEBUG_QCOM_UARTDM

		bool "Kernel low-level debugging messages via QCOM UARTDM"

		depends on ARCH_QCOM

		help

		  Say Y here if you want the debug print routines to direct

		  their output to the serial port on Qualcomm devices.



		  ARCH      DEBUG_UART_PHYS   DEBUG_UART_VIRT

		  APQ8064   0x16640000        0xf0040000

		  APQ8084   0xf995e000        0xfa75e000

		  MSM8X60   0x19c40000        0xf0040000

		  MSM8960   0x16440000        0xf0040000

		  MSM8974   0xf991e000        0xfa71e000



		  Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration

		  options based on your needs.



	config DEBUG_MVEBU_UART0

		bool "Kernel low-level debugging messages via MVEBU UART0 (old bootloaders)"

		depends on ARCH_MVEBU
@@ -588,12 +568,29 @@ choice 
		  when u-boot hands over to the kernel, the system

		  silently crashes, with no serial output at all.



	config DEBUG_VF_UART

		bool "Vybrid UART"

		depends on SOC_VF610

	config DEBUG_MT6589_UART0

		bool "Mediatek mt6589 UART0"

		depends on ARCH_MEDIATEK

		select DEBUG_UART_8250

		help

		  Say Y here if you want kernel low-level debugging support

		  on Vybrid based platforms.

		  for Mediatek mt6589 based platforms on UART0.



	config DEBUG_MT8127_UART0

		bool "Mediatek mt8127/mt6592 UART0"

		depends on ARCH_MEDIATEK

		select DEBUG_UART_8250

		help

		  Say Y here if you want kernel low-level debugging support

		  for Mediatek mt8127 based platforms on UART0.



	config DEBUG_MT8135_UART3

		bool "Mediatek mt8135 UART3"

		depends on ARCH_MEDIATEK

		select DEBUG_UART_8250

		help

		  Say Y here if you want kernel low-level debugging support

		  for Mediatek mt8135 based platforms on UART3.



	config DEBUG_NETX_UART

		bool "Kernel low-level debugging messages via NetX UART"
@@ -757,6 +754,23 @@ choice 
		  Say Y here if you want kernel low-level debugging support

		  on PXA UART1.



	config DEBUG_QCOM_UARTDM

		bool "Kernel low-level debugging messages via QCOM UARTDM"

		depends on ARCH_QCOM

		help

		  Say Y here if you want the debug print routines to direct

		  their output to the serial port on Qualcomm devices.



		  ARCH      DEBUG_UART_PHYS   DEBUG_UART_VIRT

		  APQ8064   0x16640000        0xf0040000

		  APQ8084   0xf995e000        0xfa75e000

		  MSM8X60   0x19c40000        0xf0040000

		  MSM8960   0x16440000        0xf0040000

		  MSM8974   0xf991e000        0xfa71e000



		  Please adjust DEBUG_UART_PHYS and DEBUG_UART_BASE configuration

		  options based on your needs.



	config DEBUG_REALVIEW_STD_PORT

		bool "RealView Default UART"

		depends on ARCH_REALVIEW
@@ -1023,58 +1037,6 @@ choice 
		  Say Y here if you want kernel low-level debugging support

		  on Allwinner A31/A23 based platforms on the R_UART.



	config TEGRA_DEBUG_UART_AUTO_ODMDATA

		bool "Kernel low-level debugging messages via Tegra UART via ODMDATA"

		depends on ARCH_TEGRA

		select DEBUG_TEGRA_UART

		help

		  Automatically determines which UART to use for low-level

		  debug based on the ODMDATA value. This value is part of

		  the BCT, and is written to the boot memory device using

		  nvflash, or other flashing tool.  When bits 19:18 are 3,

		  then bits 17:15 indicate which UART to use; 0/1/2/3/4

		  are UART A/B/C/D/E.



	config TEGRA_DEBUG_UARTA

		bool "Kernel low-level debugging messages via Tegra UART A"

		depends on ARCH_TEGRA

		select DEBUG_TEGRA_UART

		help

		  Say Y here if you want kernel low-level debugging support

		  on Tegra based platforms.



	config TEGRA_DEBUG_UARTB

		bool "Kernel low-level debugging messages via Tegra UART B"

		depends on ARCH_TEGRA

		select DEBUG_TEGRA_UART

		help

		  Say Y here if you want kernel low-level debugging support

		  on Tegra based platforms.



	config TEGRA_DEBUG_UARTC

		bool "Kernel low-level debugging messages via Tegra UART C"

		depends on ARCH_TEGRA

		select DEBUG_TEGRA_UART

		help

		  Say Y here if you want kernel low-level debugging support

		  on Tegra based platforms.



	config TEGRA_DEBUG_UARTD

		bool "Kernel low-level debugging messages via Tegra UART D"

		depends on ARCH_TEGRA

		select DEBUG_TEGRA_UART

		help

		  Say Y here if you want kernel low-level debugging support

		  on Tegra based platforms.



	config TEGRA_DEBUG_UARTE

		bool "Kernel low-level debugging messages via Tegra UART E"

		depends on ARCH_TEGRA

		select DEBUG_TEGRA_UART

		help

		  Say Y here if you want kernel low-level debugging support

		  on Tegra based platforms.



	config DEBUG_SIRFPRIMA2_UART1

		bool "Kernel low-level debugging messages via SiRFprimaII UART1"

		depends on ARCH_PRIMA2
@@ -1139,6 +1101,58 @@ choice 


		  If unsure, say N.



	config TEGRA_DEBUG_UART_AUTO_ODMDATA

		bool "Kernel low-level debugging messages via Tegra UART via ODMDATA"

		depends on ARCH_TEGRA

		select DEBUG_TEGRA_UART

		help

		  Automatically determines which UART to use for low-level

		  debug based on the ODMDATA value. This value is part of

		  the BCT, and is written to the boot memory device using

		  nvflash, or other flashing tool.  When bits 19:18 are 3,

		  then bits 17:15 indicate which UART to use; 0/1/2/3/4

		  are UART A/B/C/D/E.



	config TEGRA_DEBUG_UARTA

		bool "Kernel low-level debugging messages via Tegra UART A"

		depends on ARCH_TEGRA

		select DEBUG_TEGRA_UART

		help

		  Say Y here if you want kernel low-level debugging support

		  on Tegra based platforms.



	config TEGRA_DEBUG_UARTB

		bool "Kernel low-level debugging messages via Tegra UART B"

		depends on ARCH_TEGRA

		select DEBUG_TEGRA_UART

		help

		  Say Y here if you want kernel low-level debugging support

		  on Tegra based platforms.



	config TEGRA_DEBUG_UARTC

		bool "Kernel low-level debugging messages via Tegra UART C"

		depends on ARCH_TEGRA

		select DEBUG_TEGRA_UART

		help

		  Say Y here if you want kernel low-level debugging support

		  on Tegra based platforms.



	config TEGRA_DEBUG_UARTD

		bool "Kernel low-level debugging messages via Tegra UART D"

		depends on ARCH_TEGRA

		select DEBUG_TEGRA_UART

		help

		  Say Y here if you want kernel low-level debugging support

		  on Tegra based platforms.



	config TEGRA_DEBUG_UARTE

		bool "Kernel low-level debugging messages via Tegra UART E"

		depends on ARCH_TEGRA

		select DEBUG_TEGRA_UART

		help

		  Say Y here if you want kernel low-level debugging support

		  on Tegra based platforms.



	config DEBUG_U300_UART

		bool "Kernel low-level debugging messages via U300 UART0"

		depends on ARCH_U300
@@ -1154,14 +1168,6 @@ choice 
		  Say Y here if you want kernel low-level debugging support

		  on Ux500 based platforms.



	config DEBUG_MT6589_UART0

		bool "Mediatek mt6589 UART0"

		depends on ARCH_MEDIATEK

		select DEBUG_UART_8250

		help

		  Say Y here if you want kernel low-level debugging support

		  for Mediatek mt6589 based platforms on UART0.



	config DEBUG_VERSATILE

		bool "Kernel low-level debugging messages via ARM Versatile UART"

		depends on ARCH_VERSATILE
@@ -1170,22 +1176,6 @@ choice 
		  Say Y here if you want kernel low-level debugging support

		  on ARM Versatile platforms.



	config DEBUG_MT8127_UART0

		bool "Mediatek mt8127/mt6592 UART0"

		depends on ARCH_MEDIATEK

		select DEBUG_UART_8250

		help

		  Say Y here if you want kernel low-level debugging support

		  for Mediatek mt8127 based platforms on UART0.



	config DEBUG_MT8135_UART3

		bool "Mediatek mt8135 UART3"

		depends on ARCH_MEDIATEK

		select DEBUG_UART_8250

		help

		  Say Y here if you want kernel low-level debugging support

		  for Mediatek mt8135 based platforms on UART3.



	config DEBUG_VEXPRESS_UART0_DETECT

		bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"

		depends on ARCH_VEXPRESS && CPU_CP15_MMU
@@ -1222,6 +1212,13 @@ choice 
		  This option selects UART0 at 0xb0090000. This is appropriate for

		  Cortex-R series tiles and SMMs, such as Cortex-R5 and Cortex-R7



	config DEBUG_VF_UART

		bool "Vybrid UART"

		depends on SOC_VF610

		help

		  Say Y here if you want kernel low-level debugging support

		  on Vybrid based platforms.



	config DEBUG_VT8500_UART0

		bool "Use UART0 on VIA/Wondermedia SoCs"

		depends on ARCH_VT8500
@@ -1229,6 +1226,35 @@ choice 
		  This option selects UART0 on VIA/Wondermedia System-on-a-chip

		  devices, including VT8500, WM8505, WM8650 and WM8850.



	config DEBUG_ZTE_ZX

		bool "Use ZTE ZX UART"

		select DEBUG_UART_PL01X

		depends on ARCH_ZX

		help

		  Say Y here if you are enabling ZTE ZX296702 SOC and need

		  debug uart support.



		  This option is preferred over the platform specific

		  options; the platform specific options are deprecated

		  and will be soon removed.



	config DEBUG_ZYNQ_UART0

		bool "Kernel low-level debugging on Xilinx Zynq using UART0"

		depends on ARCH_ZYNQ

		help

		  Say Y here if you want the debug print routines to direct

		  their output to UART0 on the Zynq platform.



	config DEBUG_ZYNQ_UART1

		bool "Kernel low-level debugging on Xilinx Zynq using UART1"

		depends on ARCH_ZYNQ

		help

		  Say Y here if you want the debug print routines to direct

		  their output to UART1 on the Zynq platform.



		  If you have a ZC702 board and want early boot messages to

		  appear on the USB serial adaptor, select this option.



	config DEBUG_ICEDCC

		bool "Kernel low-level debugging via EmbeddedICE DCC channel"

		help
@@ -1256,18 +1282,6 @@ choice 
		  For more details about semihosting, please see

		  chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.



	config DEBUG_ZTE_ZX

		bool "Use ZTE ZX UART"

		select DEBUG_UART_PL01X

		depends on ARCH_ZX

		help

		  Say Y here if you are enabling ZTE ZX296702 SOC and need

		  debug uart support.



		  This option is preferred over the platform specific

		  options; the platform specific options are deprecated

		  and will be soon removed.



	config DEBUG_LL_UART_8250

		bool "Kernel low-level debugging via 8250 UART"

		help
@@ -1281,20 +1295,6 @@ choice 
		  options; the platform specific options are deprecated

		  and will be soon removed.



	config DEBUG_LL_UART_EFM32

		bool "Kernel low-level debugging via efm32 UART"

		depends on ARCH_EFM32

		help

		  Say Y here if you want the debug print routines to direct

		  their output to an UART or USART port on efm32 based

		  machines. Use the following addresses for DEBUG_UART_PHYS:



		    0x4000c000 | USART0

		    0x4000c400 | USART1

		    0x4000c800 | USART2

		    0x4000e000 | UART0

		    0x4000e400 | UART1



	config DEBUG_LL_UART_PL01X

		bool "Kernel low-level debugging via ARM Ltd PL01x Primecell UART"

		help
@@ -1559,6 +1559,7 @@ config DEBUG_UART_VIRT 
	default 0xf1c28000 if DEBUG_SUNXI_UART0

	default 0xf1c28400 if DEBUG_SUNXI_UART1

	default 0xf1f02800 if DEBUG_SUNXI_R_UART

	default 0xf31004c0 if DEBUG_MESON_UARTAO

	default 0xf4090000 if DEBUG_LPC32XX

	default 0xf4200000 if DEBUG_GEMINI

	default 0xf6200000 if DEBUG_PXA_UART1
@@ -1585,7 +1586,6 @@ config DEBUG_UART_VIRT 
	default 0xfd883000 if DEBUG_ALPINE_UART0

	default 0xfde12000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_DOVE

	default 0xfe012000 if DEBUG_MVEBU_UART0_ALTERNATE && ARCH_ORION5X

	default 0xf31004c0 if DEBUG_MESON_UARTAO

	default 0xfe017000 if DEBUG_MMP_UART2

	default 0xfe018000 if DEBUG_MMP_UART3

	default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART