Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 17e89bcf authored by Mike Frysinger's avatar Mike Frysinger Committed by Bryan Wu
Browse files

Blackfin arch: unify the duplicated portions of __start and split... 


Blackfin arch: unify the duplicated portions of __start and split mach-specific pieces into _mach_early_start where they will be easier to trim over time

Signed-off-by: default avatarMike Frysinger <vapier.adi@gmail.com>
Signed-off-by: default avatarBryan Wu <cooloney@kernel.org>
parent 67618fd8

arch/blackfin/mach-bf527/head.S

+3 −129
Original line number Diff line number Diff line
@@ -30,93 +30,16 @@ 
#include <linux/linkage.h>

#include <linux/init.h>

#include <asm/blackfin.h>

#include <asm/trace.h>



#ifdef CONFIG_BFIN_KERNEL_CLOCK

#include <asm/mach-common/clocks.h>

#include <asm/mach/mem_init.h>

#endif



.extern ___bss_stop

.extern ___bss_start

.extern _bf53x_relocate_l1_mem



#define INITIAL_STACK	0xFFB01000



__INIT



ENTRY(__start)

	/* R0: argument of command line string, passed from uboot, save it */

	R7 = R0;

	/* Enable Cycle Counter and Nesting Of Interrupts */

#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES

	R0 = SYSCFG_SNEN;

#else

	R0 = SYSCFG_SNEN | SYSCFG_CCEN;

#endif

	SYSCFG = R0;

	R0 = 0;



	/* Clear Out All the data and pointer Registers */

	R1 = R0;

	R2 = R0;

	R3 = R0;

	R4 = R0;

	R5 = R0;

	R6 = R0;



	P0 = R0;

	P1 = R0;

	P2 = R0;

	P3 = R0;

	P4 = R0;

	P5 = R0;



	LC0 = r0;

	LC1 = r0;

	L0 = r0;

	L1 = r0;

	L2 = r0;

	L3 = r0;



	/* Clear Out All the DAG Registers */

	B0 = r0;

	B1 = r0;

	B2 = r0;

	B3 = r0;



	I0 = r0;

	I1 = r0;

	I2 = r0;

	I3 = r0;



	M0 = r0;

	M1 = r0;

	M2 = r0;

	M3 = r0;



	trace_buffer_init(p0,r0);

	P0 = R1;

	R0 = R1;



	/* Turn off the icache */

	p0.l = LO(IMEM_CONTROL);

	p0.h = HI(IMEM_CONTROL);

	R1 = [p0];

	R0 = ~ENICPLB;

	R0 = R0 & R1;

	[p0] = R0;

	SSYNC;



	/* Turn off the dcache */

	p0.l = LO(DMEM_CONTROL);

	p0.h = HI(DMEM_CONTROL);

	R1 = [p0];

	R0 = ~ENDCPLB;

	R0 = R0 & R1;

	[p0] = R0;

	SSYNC;



ENTRY(_mach_early_start)

#if defined(CONFIG_BF527)

	p0.h = hi(EMAC_SYSTAT);

	p0.l = lo(EMAC_SYSTAT);
@@ -152,57 +75,8 @@ ENTRY(__start) 
	w[p0] = r0.L;	/* To enable UART clock */

	ssync;



	/* Initialize stack pointer */

	sp.l = lo(INITIAL_STACK);

	sp.h = hi(INITIAL_STACK);

	fp = sp;

	usp = sp;



#ifdef CONFIG_EARLY_PRINTK

	SP += -12;

	call _init_early_exception_vectors;

	SP += 12;

#endif



	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */

	call _bf53x_relocate_l1_mem;

#ifdef CONFIG_BFIN_KERNEL_CLOCK

	call _start_dma_code;

#endif



	/* This section keeps the processor in supervisor mode

	 * during kernel boot.  Switches to user mode at end of boot.

	 * See page 3-9 of Hardware Reference manual for documentation.

	 */



	/* EVT15 = _real_start */



	p0.l = lo(EVT15);

	p0.h = hi(EVT15);

	p1.l = _real_start;

	p1.h = _real_start;

	[p0] = p1;

	csync;



	p0.l = lo(IMASK);

	p0.h = hi(IMASK);

	p1.l = IMASK_IVG15;

	p1.h = 0x0;

	[p0] = p1;

	csync;



	raise 15;

	p0.l = .LWAIT_HERE;

	p0.h = .LWAIT_HERE;

	reti = p0;

#if ANOMALY_05000281

	nop; nop; nop;

#endif

	rti;



.LWAIT_HERE:

	jump .LWAIT_HERE;

ENDPROC(__start)

	rts;

ENDPROC(_mach_early_start)



__FINIT

arch/blackfin/mach-bf533/head.S

+3 −128
Original line number Diff line number Diff line
@@ -30,74 +30,16 @@ 
#include <linux/linkage.h>

#include <linux/init.h>

#include <asm/blackfin.h>

#include <asm/trace.h>

#ifdef CONFIG_BFIN_KERNEL_CLOCK

#include <asm/mach-common/clocks.h>

#include <asm/mach/mem_init.h>

#endif



.extern ___bss_stop

.extern ___bss_start

.extern _bf53x_relocate_l1_mem



#define INITIAL_STACK	0xFFB01000



__INIT



ENTRY(__start)

	/* R0: argument of command line string, passed from uboot, save it */

	R7 = R0;

	/* Enable Cycle Counter and Nesting Of Interrupts */

#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES

	R0 = SYSCFG_SNEN;

#else

	R0 = SYSCFG_SNEN | SYSCFG_CCEN;

#endif

	SYSCFG = R0;

	R0 = 0;



	/* Clear Out All the data and pointer Registers */

	R1 = R0;

	R2 = R0;

	R3 = R0;

	R4 = R0;

	R5 = R0;

	R6 = R0;



	P0 = R0;

	P1 = R0;

	P2 = R0;

	P3 = R0;

	P4 = R0;

	P5 = R0;



	LC0 = r0;

	LC1 = r0;

	L0 = r0;

	L1 = r0;

	L2 = r0;

	L3 = r0;



	/* Clear Out All the DAG Registers */

	B0 = r0;

	B1 = r0;

	B2 = r0;

	B3 = r0;



	I0 = r0;

	I1 = r0;

	I2 = r0;

	I3 = r0;



	M0 = r0;

	M1 = r0;

	M2 = r0;

	M3 = r0;



	trace_buffer_init(p0,r0);

	P0 = R1;

	R0 = R1;



ENTRY(_mach_early_start)

	p0.h = hi(FIO_MASKA_C);

	p0.l = lo(FIO_MASKA_C);

	r0 = 0xFFFF(Z);
@@ -110,24 +52,6 @@ ENTRY(__start) 
	w[p0] = r0.L;	/* Disable all interrupts */

	ssync;



	/* Turn off the icache */

	p0.l = LO(IMEM_CONTROL);

	p0.h = HI(IMEM_CONTROL);

	R1 = [p0];

	R0 = ~ENICPLB;

	R0 = R0 & R1;

	[p0] = R0;

	SSYNC;



	/* Turn off the dcache */

	p0.l = LO(DMEM_CONTROL);

	p0.h = HI(DMEM_CONTROL);

	R1 = [p0];

	R0 = ~ENDCPLB;

	R0 = R0 & R1;

	[p0] = R0;

	SSYNC;



	/* Initialise UART - when booting from u-boot, the UART is not disabled

	 * so if we dont initalize here, our serial console gets hosed */

	p0.h = hi(BFIN_UART_LCR);
@@ -154,57 +78,8 @@ ENTRY(__start) 
	w[p0] = r0.L;	/* To enable UART clock */

	ssync;



	/* Initialize stack pointer */

	sp.l = lo(INITIAL_STACK);

	sp.h = hi(INITIAL_STACK);

	fp = sp;

	usp = sp;



#ifdef CONFIG_EARLY_PRINTK

	SP += -12;

	call _init_early_exception_vectors;

	SP += 12;

#endif



	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */

	call _bf53x_relocate_l1_mem;

#ifdef CONFIG_BFIN_KERNEL_CLOCK

	call _start_dma_code;

#endif



	/* This section keeps the processor in supervisor mode

	 * during kernel boot.  Switches to user mode at end of boot.

	 * See page 3-9 of Hardware Reference manual for documentation.

	 */



	/* EVT15 = _real_start */



	p0.l = lo(EVT15);

	p0.h = hi(EVT15);

	p1.l = _real_start;

	p1.h = _real_start;

	[p0] = p1;

	csync;



	p0.l = lo(IMASK);

	p0.h = hi(IMASK);

	p1.l = IMASK_IVG15;

	p1.h = 0x0;

	[p0] = p1;

	csync;



	raise 15;

	p0.l = .LWAIT_HERE;

	p0.h = .LWAIT_HERE;

	reti = p0;

#if ANOMALY_05000281

	nop; nop; nop;

#endif

	rti;



.LWAIT_HERE:

	jump .LWAIT_HERE;

ENDPROC(__start)

	rts;

ENDPROC(_mach_early_start)



__FINIT

arch/blackfin/mach-bf537/head.S

+3 −129
Original line number Diff line number Diff line
@@ -30,93 +30,16 @@ 
#include <linux/linkage.h>

#include <linux/init.h>

#include <asm/blackfin.h>

#include <asm/trace.h>



#ifdef CONFIG_BFIN_KERNEL_CLOCK

#include <asm/mach-common/clocks.h>

#include <asm/mach/mem_init.h>

#endif



.extern ___bss_stop

.extern ___bss_start

.extern _bf53x_relocate_l1_mem



#define INITIAL_STACK	0xFFB01000



__INIT



ENTRY(__start)

	/* R0: argument of command line string, passed from uboot, save it */

	R7 = R0;

	/* Enable Cycle Counter and Nesting Of Interrupts */

#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES

	R0 = SYSCFG_SNEN;

#else

	R0 = SYSCFG_SNEN | SYSCFG_CCEN;

#endif

	SYSCFG = R0;

	R0 = 0;



	/* Clear Out All the data and pointer Registers */

	R1 = R0;

	R2 = R0;

	R3 = R0;

	R4 = R0;

	R5 = R0;

	R6 = R0;



	P0 = R0;

	P1 = R0;

	P2 = R0;

	P3 = R0;

	P4 = R0;

	P5 = R0;



	LC0 = r0;

	LC1 = r0;

	L0 = r0;

	L1 = r0;

	L2 = r0;

	L3 = r0;



	/* Clear Out All the DAG Registers */

	B0 = r0;

	B1 = r0;

	B2 = r0;

	B3 = r0;



	I0 = r0;

	I1 = r0;

	I2 = r0;

	I3 = r0;



	M0 = r0;

	M1 = r0;

	M2 = r0;

	M3 = r0;



	trace_buffer_init(p0,r0);

	P0 = R1;

	R0 = R1;



	/* Turn off the icache */

	p0.l = LO(IMEM_CONTROL);

	p0.h = HI(IMEM_CONTROL);

	R1 = [p0];

	R0 = ~ENICPLB;

	R0 = R0 & R1;

	[p0] = R0;

	SSYNC;



	/* Turn off the dcache */

	p0.l = LO(DMEM_CONTROL);

	p0.h = HI(DMEM_CONTROL);

	R1 = [p0];

	R0 = ~ENDCPLB;

	R0 = R0 & R1;

	[p0] = R0;

	SSYNC;



ENTRY(_mach_early_start)

	/* Initialise General-Purpose I/O Modules on BF537 */

	p0.h = hi(BFIN_PORT_MUX);

	p0.l = lo(BFIN_PORT_MUX);
@@ -166,57 +89,8 @@ ENTRY(__start) 
	w[p0] = r0.L;	/* To enable UART clock */

	ssync;



	/* Initialize stack pointer */

	sp.l = lo(INITIAL_STACK);

	sp.h = hi(INITIAL_STACK);

	fp = sp;

	usp = sp;



#ifdef CONFIG_EARLY_PRINTK

	SP += -12;

	call _init_early_exception_vectors;

	SP += 12;

#endif



	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */

	call _bf53x_relocate_l1_mem;

#ifdef CONFIG_BFIN_KERNEL_CLOCK

	call _start_dma_code;

#endif



	/* This section keeps the processor in supervisor mode

	 * during kernel boot.  Switches to user mode at end of boot.

	 * See page 3-9 of Hardware Reference manual for documentation.

	 */



	/* EVT15 = _real_start */



	p0.l = lo(EVT15);

	p0.h = hi(EVT15);

	p1.l = _real_start;

	p1.h = _real_start;

	[p0] = p1;

	csync;



	p0.l = lo(IMASK);

	p0.h = hi(IMASK);

	p1.l = IMASK_IVG15;

	p1.h = 0x0;

	[p0] = p1;

	csync;



	raise 15;

	p0.l = .LWAIT_HERE;

	p0.h = .LWAIT_HERE;

	reti = p0;

#if ANOMALY_05000281

	nop; nop; nop;

#endif

	rti;



.LWAIT_HERE:

	jump .LWAIT_HERE;

ENDPROC(__start)

	rts;

ENDPROC(_mach_early_start)



__FINIT

arch/blackfin/mach-bf548/head.S

+3 −130
Original line number Diff line number Diff line
@@ -30,145 +30,18 @@ 
#include <linux/linkage.h>

#include <linux/init.h>

#include <asm/blackfin.h>

#include <asm/trace.h>

#ifdef CONFIG_BFIN_KERNEL_CLOCK

#include <asm/mach-common/clocks.h>

#include <asm/mach/mem_init.h>

#endif



.extern ___bss_stop

.extern ___bss_start

.extern _bf53x_relocate_l1_mem



#define INITIAL_STACK   0xFFB01000



__INIT



ENTRY(__start)

	/* R0: argument of command line string, passed from uboot, save it */

	R7 = R0;

	/* Enable Cycle Counter and Nesting Of Interrupts */

#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES

	R0 = SYSCFG_SNEN;

#else

	R0 = SYSCFG_SNEN | SYSCFG_CCEN;

#endif

	SYSCFG = R0;

	R0 = 0;



	/* Clear Out All the data and pointer  Registers*/

	R1 = R0;

	R2 = R0;

	R3 = R0;

	R4 = R0;

	R5 = R0;

	R6 = R0;



	P0 = R0;

	P1 = R0;

	P2 = R0;

	P3 = R0;

	P4 = R0;

	P5 = R0;



	LC0 = r0;

	LC1 = r0;

	L0 = r0;

	L1 = r0;

	L2 = r0;

	L3 = r0;



	/* Clear Out All the DAG Registers*/

	B0 = r0;

	B1 = r0;

	B2 = r0;

	B3 = r0;



	I0 = r0;

	I1 = r0;

	I2 = r0;

	I3 = r0;



	M0 = r0;

	M1 = r0;

	M2 = r0;

	M3 = r0;



	trace_buffer_init(p0,r0);

	P0 = R1;

	R0 = R1;



	/* Turn off the icache */

	p0.l = LO(IMEM_CONTROL);

	p0.h = HI(IMEM_CONTROL);

	R1 = [p0];

	R0 = ~ENICPLB;

	R0 = R0 & R1;

	[p0] = R0;

	SSYNC;



	/* Turn off the dcache */

	p0.l = LO(DMEM_CONTROL);

	p0.h = HI(DMEM_CONTROL);

	R1 = [p0];

	R0 = ~ENDCPLB;

	R0 = R0 & R1;

	[p0] = R0;

	SSYNC;



	/* Initialize stack pointer */

	SP.L = LO(INITIAL_STACK);

	SP.H = HI(INITIAL_STACK);

	FP = SP;

	USP = SP;



#ifdef CONFIG_EARLY_PRINTK

	SP += -12;

	call _init_early_exception_vectors;

	SP += 12;

#endif



	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */

	call _bf53x_relocate_l1_mem;

#ifdef CONFIG_BFIN_KERNEL_CLOCK

	call _start_dma_code;

#endif



	/* This section keeps the processor in supervisor mode

	 * during kernel boot.  Switches to user mode at end of boot.

	 * See page 3-9 of Hardware Reference manual for documentation.

	 */



	/* EVT15 = _real_start */



	p0.l = lo(EVT15);

	p0.h = hi(EVT15);

	p1.l = _real_start;

	p1.h = _real_start;

	[p0] = p1;

	csync;



	p0.l = lo(IMASK);

	p0.h = hi(IMASK);

	p1.l = IMASK_IVG15;

	p1.h = 0x0;

	[p0] = p1;

	csync;



	raise 15;

	p0.l = .LWAIT_HERE;

	p0.h = .LWAIT_HERE;

	reti = p0;

#if ANOMALY_05000281

	nop;

	nop;

	nop;

#endif

	rti;



.LWAIT_HERE:

	jump .LWAIT_HERE;

ENDPROC(__start)

ENTRY(_mach_early_start)

	rts;

ENDPROC(_mach_early_start)



__FINIT

arch/blackfin/mach-bf561/head.S

+5 −131
Original line number Diff line number Diff line
@@ -30,93 +30,16 @@ 
#include <linux/linkage.h>

#include <linux/init.h>

#include <asm/blackfin.h>

#include <asm/trace.h>



#if CONFIG_BFIN_KERNEL_CLOCK

#ifdef CONFIG_BFIN_KERNEL_CLOCK

#include <asm/mach-common/clocks.h>

#include <asm/mach/mem_init.h>

#endif



.extern ___bss_stop

.extern ___bss_start

.extern _bf53x_relocate_l1_mem



#define INITIAL_STACK	0xFFB01000



__INIT



ENTRY(__start)

	/* R0: argument of command line string, passed from uboot, save it */

	R7 = R0;

	/* Enable Cycle Counter and Nesting Of Interrupts */

#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES

	R0 = SYSCFG_SNEN;

#else

	R0 = SYSCFG_SNEN | SYSCFG_CCEN;

#endif

	SYSCFG = R0;

	R0 = 0;



	/* Clear Out All the data and pointer Registers */

	R1 = R0;

	R2 = R0;

	R3 = R0;

	R4 = R0;

	R5 = R0;

	R6 = R0;



	P0 = R0;

	P1 = R0;

	P2 = R0;

	P3 = R0;

	P4 = R0;

	P5 = R0;



	LC0 = r0;

	LC1 = r0;

	L0 = r0;

	L1 = r0;

	L2 = r0;

	L3 = r0;



	/* Clear Out All the DAG Registers */

	B0 = r0;

	B1 = r0;

	B2 = r0;

	B3 = r0;



	I0 = r0;

	I1 = r0;

	I2 = r0;

	I3 = r0;



	M0 = r0;

	M1 = r0;

	M2 = r0;

	M3 = r0;



	trace_buffer_init(p0,r0);

	P0 = R1;

	R0 = R1;



	/* Turn off the icache */

	p0.l = LO(IMEM_CONTROL);

	p0.h = HI(IMEM_CONTROL);

	R1 = [p0];

	R0 = ~ENICPLB;

	R0 = R0 & R1;

	[p0] = R0;

	SSYNC;



	/* Turn off the dcache */

	p0.l = LO(DMEM_CONTROL);

	p0.h = HI(DMEM_CONTROL);

	R1 = [p0];

	R0 = ~ENDCPLB;

	R0 = R0 & R1;

	[p0] = R0;

	SSYNC;



ENTRY(_mach_early_start)

	/* Initialise UART - when booting from u-boot, the UART is not disabled

	 * so if we dont initalize here, our serial console gets hosed */

	p0.h = hi(BFIN_UART_LCR);
@@ -143,62 +66,13 @@ ENTRY(__start) 
	w[p0] = r0.L;	/* To enable UART clock */

	ssync;



	/* Initialize stack pointer */

	sp.l = lo(INITIAL_STACK);

	sp.h = hi(INITIAL_STACK);

	fp = sp;

	usp = sp;



#ifdef CONFIG_EARLY_PRINTK

	SP += -12;

	call _init_early_exception_vectors;

	SP += 12;

#endif



	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */

	call _bf53x_relocate_l1_mem;

#if CONFIG_BFIN_KERNEL_CLOCK

	call _start_dma_code;

#endif



	/* This section keeps the processor in supervisor mode

	 * during kernel boot.  Switches to user mode at end of boot.

	 * See page 3-9 of Hardware Reference manual for documentation.

	 */



	/* EVT15 = _real_start */



	p0.l = lo(EVT15);

	p0.h = hi(EVT15);

	p1.l = _real_start;

	p1.h = _real_start;

	[p0] = p1;

	csync;



	p0.l = lo(IMASK);

	p0.h = hi(IMASK);

	p1.l = IMASK_IVG15;

	p1.h = 0x0;

	[p0] = p1;

	csync;



	raise 15;

	p0.l = .LWAIT_HERE;

	p0.h = .LWAIT_HERE;

	reti = p0;

#if ANOMALY_05000281

	nop; nop; nop;

#endif

	rti;



.LWAIT_HERE:

	jump .LWAIT_HERE;

ENDPROC(__start)

	rts;

ENDPROC(_mach_early_start)



__FINIT



.section .l1.text

#if CONFIG_BFIN_KERNEL_CLOCK

#ifdef CONFIG_BFIN_KERNEL_CLOCK

ENTRY(_start_dma_code)

	p0.h = hi(SICA_IWR0);

	p0.l = lo(SICA_IWR0);