Tulip fixes for Cobalt Qube/RaQ (12755c16) · Commits · e / devices / android_kernel_oneplus_sm8150

drivers/net/tulip/eeprom.c

+16 −0

Original line number	Diff line number	Diff line
		@@ -63,6 +63,22 @@ static struct eeprom_fixup eeprom_fixups[] __devinitdata = {
		*/
		{ 0x1e00, 0x0000, 0x000b, 0x8f01, 0x0103, 0x0300, 0x0821, 0x000, 0x0001, 0x0000, 0x01e1 }
		},
		{"Cobalt Microserver", 0, 0x10, 0xE0, {0x1e00, /* 0 == controller #, 1e == offset */
		0x0000, /* 0 == high offset, 0 == gap */
		0x0800, /* Default Autoselect */
		0x8001, /* 1 leaf, extended type, bogus len */
		0x0003, /* Type 3 (MII), PHY #0 */
		0x0400, /* 0 init instr, 4 reset instr */
		0x0801, /* Set control mode, GP0 output */
		0x0000, /* Drive GP0 Low (RST is active low) */
		0x0800, /* control mode, GP0 input (undriven) */
		0x0000, /* clear control mode */
		0x7800, /* 100TX FDX + HDX, 10bT FDX + HDX */
		0x01e0, /* Advertise all above */
		0x5000, /* FDX all above */
		0x1800, /* Set fast TTM in 100bt modes */
		0x0000, /* PHY cannot be unplugged */
		}},
		{NULL}};

+3 −0

Original line number	Diff line number	Diff line
		@@ -400,6 +400,9 @@ void tulip_select_media(struct net_device *dev, int startup)
		}

		tp->csr6 = new_csr6 \| (tp->csr6 & 0xfdff) \| (tp->full_duplex ? 0x0200 : 0);

		mdelay(1);

		return;
		}

+2 −2

Original line number	Diff line number	Diff line
		@@ -1514,8 +1514,8 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
		(PCI_SLOT(pdev->devfn) == 12))) {
		/* Cobalt MAC address in first EEPROM locations. */
		sa_offset = 0;
		/* No media table either */
		tp->flags &= ~HAS_MEDIA_TABLE;
		/* Ensure our media table fixup get's applied */
		memcpy(ee_data + 16, ee_data, 8);
		}
		#endif
		#ifdef CONFIG_GSC