Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 0e1165e8 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab
Browse files

V4L/DVB (6385): Adds the capability of configuring tea5767 support



tea5767 has several possible configurations. Before the patch, the
driver were assuming the more common configuration. However, some newer
cards, like MSI @nyware Master requires other configurations, like
de-activating a gpio port and changing chip Xtal.

This patch adds the capability of altering device configuration at
runtime. This may also be used later to activate some features like
auto-mute when signal is weak.

Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@infradead.org>
parent 7f171123
Loading
Loading
Loading
Loading
+62 −27
Original line number Diff line number Diff line
@@ -22,10 +22,12 @@ MODULE_PARM_DESC(debug, "enable verbose debug messages");

#define PREFIX "tea5767 "

/*****************************************************************************/

struct tea5767_priv {
	struct tuner_i2c_props	i2c_props;

	u32			frequency;
	struct tea5767_ctrl	ctrl;
};

/*****************************************************************************/
@@ -127,17 +129,10 @@ struct tea5767_priv {
/* Reserved for future extensions */
#define TEA5767_RESERVED_MASK	0xff

enum tea5767_xtal_freq {
	TEA5767_LOW_LO_32768    = 0,
	TEA5767_HIGH_LO_32768   = 1,
	TEA5767_LOW_LO_13MHz    = 2,
	TEA5767_HIGH_LO_13MHz   = 3,
};


/*****************************************************************************/

static void tea5767_status_dump(unsigned char *buffer)
static void tea5767_status_dump(struct tea5767_priv *priv,
				unsigned char *buffer)
{
	unsigned int div, frq;

@@ -153,7 +148,7 @@ static void tea5767_status_dump(unsigned char *buffer)

	div = ((buffer[0] & 0x3f) << 8) | buffer[1];

	switch (TEA5767_HIGH_LO_32768) {
	switch (priv->ctrl.xtal_freq) {
	case TEA5767_HIGH_LO_13MHz:
		frq = (div * 50000 - 700000 - 225000) / 4;	/* Freq in KHz */
		break;
@@ -202,13 +197,10 @@ static int set_radio_freq(struct dvb_frontend *fe,

	tuner_dbg("radio freq = %d.%03d MHz\n", frq/16000,(frq/16)%1000);

	/* Rounds freq to next decimal value - for 62.5 KHz step */
	/* frq = 20*(frq/16)+radio_frq[frq%16]; */
	buffer[2] = 0;

	buffer[2] = TEA5767_PORT1_HIGH;
	buffer[3] = TEA5767_PORT2_HIGH | TEA5767_HIGH_CUT_CTRL |
		    TEA5767_ST_NOISE_CTL | TEA5767_JAPAN_BAND;
	buffer[4] = 0;
	if (priv->ctrl.port1)
		buffer[2] |= TEA5767_PORT1_HIGH;

	if (params->audmode == V4L2_TUNER_MODE_MONO) {
		tuner_dbg("TEA5767 set to mono\n");
@@ -217,18 +209,45 @@ static int set_radio_freq(struct dvb_frontend *fe,
		tuner_dbg("TEA5767 set to stereo\n");
	}

	/* Should be replaced */
	switch (TEA5767_HIGH_LO_32768) {

	buffer[3] = 0;

	if (priv->ctrl.port2)
		buffer[3] |= TEA5767_PORT2_HIGH;

	if (priv->ctrl.high_cut)
		buffer[3] |= TEA5767_HIGH_CUT_CTRL;

	if (priv->ctrl.st_noise)
		buffer[3] |= TEA5767_ST_NOISE_CTL;

	if (priv->ctrl.soft_mute)
		buffer[3] |= TEA5767_SOFT_MUTE;

	if (priv->ctrl.japan_band)
		buffer[3] |= TEA5767_JAPAN_BAND;

	buffer[4] = 0;

	if (priv->ctrl.deemph_75)
		buffer[4] |= TEA5767_DEEMPH_75;

	if (priv->ctrl.pllref)
		buffer[4] |= TEA5767_PLLREF_ENABLE;


	/* Rounds freq to next decimal value - for 62.5 KHz step */
	/* frq = 20*(frq/16)+radio_frq[frq%16]; */

	switch (priv->ctrl.xtal_freq) {
	case TEA5767_HIGH_LO_13MHz:
		tuner_dbg("radio HIGH LO inject xtal @ 13 MHz\n");
		buffer[2] |= TEA5767_HIGH_LO_INJECT;
		buffer[4] |= TEA5767_PLLREF_ENABLE;
		div = (frq * (4000 / 16) + 700000 + 225000 + 25000) / 50000;
		break;
	case TEA5767_LOW_LO_13MHz:
		tuner_dbg("radio LOW LO inject xtal @ 13 MHz\n");

		buffer[4] |= TEA5767_PLLREF_ENABLE;
		div = (frq * (4000 / 16) - 700000 - 225000 + 25000) / 50000;
		break;
	case TEA5767_LOW_LO_32768:
@@ -256,7 +275,7 @@ static int set_radio_freq(struct dvb_frontend *fe,
		if (5 != (rc = tuner_i2c_xfer_recv(&priv->i2c_props, buffer, 5)))
			tuner_warn("i2c i/o error: rc == %d (should be 5)\n", rc);
		else
			tea5767_status_dump(buffer);
			tea5767_status_dump(priv, buffer);
	}

	priv->frequency = frq * 125 / 2;
@@ -398,6 +417,16 @@ static int tea5767_get_frequency(struct dvb_frontend *fe, u32 *frequency)
{
	struct tea5767_priv *priv = fe->tuner_priv;
	*frequency = priv->frequency;

	return 0;
}

static int tea5767_set_config (struct dvb_frontend *fe, void *priv_cfg)
{
	struct tea5767_priv *priv = fe->tuner_priv;

	memcpy(&priv->ctrl, priv_cfg, sizeof(priv->ctrl));

	return 0;
}

@@ -407,6 +436,7 @@ static struct dvb_tuner_ops tea5767_tuner_ops = {
	},

	.set_analog_params = set_radio_freq,
	.set_config	   = tea5767_set_config,
	.sleep             = tea5767_standby,
	.release           = tea5767_release,
	.get_frequency     = tea5767_get_frequency,
@@ -427,6 +457,12 @@ struct dvb_frontend *tea5767_attach(struct dvb_frontend *fe,

	priv->i2c_props.addr  = i2c_addr;
	priv->i2c_props.adap  = i2c_adap;
	priv->ctrl.xtal_freq  = TEA5767_HIGH_LO_32768;
	priv->ctrl.port1      = 1;
	priv->ctrl.port2      = 1;
	priv->ctrl.high_cut   = 1;
	priv->ctrl.st_noise   = 1;
	priv->ctrl.japan_band = 1;

	memcpy(&fe->ops.tuner_ops, &tea5767_tuner_ops,
	       sizeof(struct dvb_tuner_ops));
@@ -436,7 +472,6 @@ struct dvb_frontend *tea5767_attach(struct dvb_frontend *fe,
	return fe;
}


EXPORT_SYMBOL_GPL(tea5767_attach);
EXPORT_SYMBOL_GPL(tea5767_autodetection);

+19 −0
Original line number Diff line number Diff line
@@ -20,6 +20,25 @@
#include <linux/i2c.h>
#include "dvb_frontend.h"

enum tea5767_xtal {
	TEA5767_LOW_LO_32768    = 0,
	TEA5767_HIGH_LO_32768   = 1,
	TEA5767_LOW_LO_13MHz    = 2,
	TEA5767_HIGH_LO_13MHz   = 3,
};

struct tea5767_ctrl {
	unsigned int		port1:1;
	unsigned int		port2:1;
	unsigned int		high_cut:1;
	unsigned int		st_noise:1;
	unsigned int		soft_mute:1;
	unsigned int		japan_band:1;
	unsigned int		deemph_75:1;
	unsigned int		pllref:1;
	enum tea5767_xtal	xtal_freq;
};

#if defined(CONFIG_TUNER_TEA5767) || (defined(CONFIG_TUNER_TEA5767_MODULE) && defined(MODULE))
extern int tea5767_autodetection(struct i2c_adapter* i2c_adap, u8 i2c_addr);