Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 07bc299b authored by Peter Griffin's avatar Peter Griffin Committed by Linus Walleij
Browse files

pinctrl: st: Remove obsolete platforms from pinctrl-st dt doc 



STiH415/6 SoC support is being removed from the kernel.
This patch updates the ST pinctrl dt doc and removes
references to these obsolete platforms. It also updates
the dt example to the currently supported STiH407
platform.

Signed-off-by: default avatarPeter Griffin <peter.griffin@linaro.org>
Cc: <linus.walleij@linaro.org>
Cc: <robh+dt@kernel.org>
Cc: <linux-gpio@vger.kernel.org>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent 147e1468

Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt

+16 −17
Original line number Diff line number Diff line
@@ -30,8 +30,7 @@ Second type has a dedicated interrupt per gpio bank. 


Pin controller node:

Required properties:

- compatible	: should be "st,<SOC>-<pio-block>-pinctrl"

	like st,stih415-sbc-pinctrl, st,stih415-front-pinctrl and so on.

- compatible	: should be "st,stih407-<pio-block>-pinctrl"

- st,syscfg		: Should be a phandle of the syscfg node.

- st,retime-pin-mask	: Should be mask to specify which pins can be retimed.

	If the property is not present, it is assumed that all the pins in the
@@ -82,20 +81,20 @@ Example: 
	pin-controller-sbc {

		#address-cells = <1>;

		#size-cells = <1>;

		compatible	= "st,stih415-sbc-pinctrl";

		compatible = "st,stih407-sbc-pinctrl";

		st,syscfg = <&syscfg_sbc>;

		reg 		= <0xfe61f080 0x4>;

		reg = <0x0961f080 0x4>;

		reg-names = "irqmux";

		interrupts 	= <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;

		interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>;

		interrupt-names = "irqmux";

		ranges 		= <0 0xfe610000 0x5000>;

		ranges = <0 0x09610000 0x6000>;



		PIO0: gpio@fe610000 {

		pio0: gpio@09610000 {

			gpio-controller;

			#gpio-cells = <2>;

			interrupt-controller;

			#interrupt-cells = <2>;

			reg		= <0 0x100>;

			reg = <0x0 0x100>;

			st,bank-name = "PIO0";

		};

		...
@@ -166,7 +165,7 @@ pin-controller { 


sdhci0:sdhci@fe810000{

	...

	interrupt-parent = <&PIO3>;

	interrupt-parent = <&pio3>;

	#interrupt-cells = <2>;

	interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; /* Interrupt line via PIO3-3 */

	interrupt-names = "card-detect";