Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 0798af54 authored by Kishon Vijay Abraham I's avatar Kishon Vijay Abraham I Committed by Tony Lindgren
Browse files

ARM: dts: dra72-evm-common: Correct vmmc-supply for mmc2



On dra72/dra71 evms, mmc2 vdd/ios are connected to a common 1.8V supply
not 3.3V. Also the regulator that supplies 1.8V is different on dra71-evm
so move the supply property from common dtsi to evm specific dts files.

Fixes: a4240d3a ("ARM: dts: Add support for dra72-evm rev C (SR2.0)")
Signed-off-by: default avatarRavikumar Kattekola <rk@ti.com>
Signed-off-by: default avatarSekhar Nori <nsekhar@ti.com>
Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent 45f1d5e3
Loading
Loading
Loading
Loading
+14 −0
Original line number Diff line number Diff line
@@ -32,6 +32,16 @@
			  3000000 0x1>;
	};

	evm_1v8_sw: fixedregulator-evm_1v8 {
		compatible = "regulator-fixed";
		regulator-name = "evm_1v8";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		vin-supply = <&lp8732_buck0_reg>;
		regulator-always-on;
		regulator-boot-on;
	};

	poweroff: gpio-poweroff {
		compatible = "gpio-poweroff";
		gpios = <&gpio7 30 GPIO_ACTIVE_HIGH>;
@@ -165,6 +175,10 @@
	vmmc_aux-supply = <&vpo_sd_1v8_3v3>;
};

&mmc2 {
	vmmc-supply = <&evm_1v8_sw>;
};

&mac {
	mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_LOW>,
		     <&pcf_hdmi 9 GPIO_ACTIVE_LOW>,	/* P11 */
+0 −2
Original line number Diff line number Diff line
@@ -419,8 +419,6 @@
	status = "okay";
	pinctrl-names = "default";
	pinctrl-0 = <&mmc2_pins_default>;

	vmmc-supply = <&evm_3v3_sw>;
	bus-width = <8>;
	ti,non-removable;
	max-frequency = <192000000>;
+14 −0
Original line number Diff line number Diff line
@@ -15,6 +15,16 @@
		device_type = "memory";
		reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
	};

	evm_1v8_sw: fixedregulator-evm_1v8 {
		compatible = "regulator-fixed";
		regulator-name = "evm_1v8";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		vin-supply = <&smps4_reg>;
		regulator-always-on;
		regulator-boot-on;
	};
};

&i2c1 {
@@ -82,3 +92,7 @@
		interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
	};
};

&mmc2 {
	vmmc-supply = <&evm_1v8_sw>;
};
+14 −0
Original line number Diff line number Diff line
@@ -13,6 +13,16 @@
		device_type = "memory";
		reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */
	};

	evm_1v8_sw: fixedregulator-evm_1v8 {
		compatible = "regulator-fixed";
		regulator-name = "evm_1v8";
		regulator-min-microvolt = <1800000>;
		regulator-max-microvolt = <1800000>;
		vin-supply = <&smps4_reg>;
		regulator-always-on;
		regulator-boot-on;
	};
};

&i2c1 {
@@ -43,3 +53,7 @@
	phy_id = <&davinci_mdio>, <3>;
	phy-mode = "rgmii";
};

&mmc2 {
	vmmc-supply = <&evm_1v8_sw>;
};