Merge "power: qpnp-qg: Update the QPNP QG driver from 4.9 kernel"

		    capacity learning cycle. If this is not specified, then

		    the default value is 0. Unit is in decipercentage.

- qcom,esr-disable

	Usage:      optional

	Value type: <bool>

	Definition: Boolean property to disable ESR estimation. If not defined

		    ESR estimation stays enabled for charge-cycles.

- qcom,esr-discharge-enable

	Usage:      optional

	Value type: <bool>

	Definition: Boolean property to enable ESR estimation during discharge.

		    Only valid if 'qcom,esr-disable' is not defined.

- qcom,esr-qual-current-ua

	Usage:      optional

	Value type: <u32>

	Definition: Minimum current differential in uA to qualify an ESR

		    reading as valid. If not defined the value defaults

		    to 130mA.

- qcom,esr-qual-vbatt-uv

	Usage:      optional

	Value type: <u32>

	Definition: Minimum vbatt differential in uV to qualify an ESR

		    reading as valid. If not defined the value defaults

		    to 7mV.

- qcom,esr-disable-soc

	Usage:      optional

	Value type: <u32>

	Definition: Minimum battery SOC below which ESR will not be

		    attempted by QG. If not defined the value defaults

		    to 10%.

- qcom,qg-ext-sns

	Usage:      optional

	Value type: <bool>

	Definition: Boolean property to support external-rsense based

		    configuration.

==========================================================

Second Level Nodes - Peripherals managed by QGAUGE driver

==========================================================

{

	u8 table_index = charging ? TABLE_SOC_OCV1 : TABLE_SOC_OCV2;

	if (!the_battery || !the_battery->profile_node) {

		pr_err("Battery profile not loaded\n");

	if (!the_battery || !the_battery->profile_node)

		return -ENODEV;

	}

	*soc = interpolate_soc(&the_battery->profile[table_index],

				batt_temp, UV_TO_DECIUV(ocv_uv));

	u8 table_index = charging ? TABLE_FCC1 : TABLE_FCC2;

	u32 fcc_mah;

	if (!the_battery || !the_battery->profile_node) {

		pr_err("Battery profile not loaded\n");

	if (!the_battery || !the_battery->profile_node)

		return -ENODEV;

	}

	fcc_mah = interpolate_single_row_lut(

				&the_battery->profile[table_index],

#include <linux/kernel.h>

#include "fg-alg.h"

#include "qg-defs.h"

struct qg_batt_props {

	const char		*batt_type_str;

	int			rbat_conn_mohm;

	int			ignore_shutdown_soc_secs;

	int			cold_temp_threshold;

	int			esr_qual_i_ua;

	int			esr_qual_v_uv;

	int			esr_disable_soc;

	bool			hold_soc_while_full;

	bool			linearize_soc;

	bool			cl_disable;

	bool			cl_feedback_on;

	bool			esr_disable;

	bool			esr_discharge_enable;

	bool			qg_ext_sense;

};

struct qg_esr_data {

	u32			pre_esr_v;

	u32			pre_esr_i;

	u32			post_esr_v;

	u32			post_esr_i;

	u32			esr;

	bool			valid;

};

struct qpnp_qg {

	struct power_supply	*batt_psy;

	struct power_supply	*usb_psy;

	struct power_supply	*parallel_psy;

	struct qg_esr_data	esr_data[QG_MAX_ESR_COUNT];

	/* status variable */

	u32			*debug_mask;

	bool			charge_full;

	int			charge_status;

	int			charge_type;

	int			chg_iterm_ma;

	int			next_wakeup_ms;

	int			esr_actual;

	int			esr_nominal;

	int			soh;

	int			soc_reporting_ready;

	u32			fifo_done_count;

	u32			wa_flags;

	u32			seq_no;

	u32			charge_counter_uah;

	u32			esr_avg;

	u32			esr_last;

	ktime_t			last_user_update_time;

	ktime_t			last_fifo_update_time;

	struct iio_channel	*batt_therm_chan;

	int			pon_soc;

	int			batt_soc;

	int			cc_soc;

	int			full_soc;

	struct alarm		alarm_timer;

	u32			sdam_data[SDAM_MAX];

	struct cap_learning	*cl;

	/* charge counter */

	struct cycle_counter	*counter;

	/* ttf */

	struct ttf		*ttf;

};

struct ocv_all {

	u32 ocv_uv;

	u32 ocv_raw;

	char ocv_type[20];

};

enum ocv_type {

	S3_GOOD_OCV,

	S3_LAST_OCV,

	SDAM_PON_OCV,

	PON_OCV_MAX,

};

enum debug_mask {

	QG_DEBUG_BUS_READ	= BIT(8),

	QG_DEBUG_BUS_WRITE	= BIT(9),

	QG_DEBUG_ALG_CL		= BIT(10),

	QG_DEBUG_ESR		= BIT(11),

};

enum qg_irq {

#define GOOD_OCV_VOTER			"GOOD_OCV_VOTER"

#define PROFILE_IRQ_DISABLE		"NO_PROFILE_IRQ_DISABLE"

#define QG_INIT_STATE_IRQ_DISABLE	"QG_INIT_STATE_IRQ_DISABLE"

#define TTF_AWAKE_VOTER			"TTF_AWAKE_VOTER"

#define V_RAW_TO_UV(V_RAW)		div_u64(194637ULL * (u64)V_RAW, 1000)

#define I_RAW_TO_UA(I_RAW)		div_s64(152588LL * (s64)I_RAW, 1000)

#define UV_TO_DECIUV(a)			(a / 100)

#define DECIUV_TO_UV(a)			(a * 100)

#define QG_MAX_ESR_COUNT		10

#define QG_MIN_ESR_COUNT		2

#define CAP(min, max, value)			\

		((min > value) ? min : ((value > max) ? max : value))

#define QG_TYPE					0x0D

#define QG_STATUS1_REG				0x08

#define QG_OK_BIT				BIT(7)

#define BATTERY_PRESENT_BIT			BIT(0)

#define ESR_MEAS_DONE_BIT			BIT(4)

#define QG_STATUS2_REG				0x09

#define GOOD_OCV_BIT				BIT(1)

#define QG_STATUS3_REG				0x0A

#define COUNT_FIFO_RT_MASK			GENMASK(3, 0)

#define QG_STATUS4_REG				0x0B

#define ESR_MEAS_IN_PROGRESS_BIT		BIT(4)

#define QG_INT_RT_STS_REG			0x10

#define FIFO_UPDATE_DONE_RT_STS_BIT		BIT(3)

#define VBAT_LOW_INT_RT_STS_BIT			BIT(1)

#define BATTERY_MISSING_INT_RT_STS_BIT		BIT(0)

#define QG_INT_LATCHED_STS_REG			0x18

#define FIFO_UPDATE_DONE_INT_LAT_STS_BIT	BIT(3)

#define QG_S3_ENTRY_IBAT_THRESHOLD_REG		0x5E

#define QG_S3_EXIT_IBAT_THRESHOLD_REG		0x5F

#define QG_S5_OCV_VALIDATE_MEAS_CTL1_REG	0x60

#define ALLOW_S5_BIT				BIT(7)

#define QG_S7_PON_OCV_MEAS_CTL1_REG		0x64

#define ADC_CONV_DLY_MASK			GENMASK(3, 0)

#define QG_ESR_MEAS_TRIG_REG			0x68

#define HW_ESR_MEAS_START_BIT			BIT(0)

#define QG_S7_PON_OCV_V_DATA0_REG		0x70

#define QG_S7_PON_OCV_I_DATA0_REG		0x72

#define QG_S3_GOOD_OCV_V_DATA0_REG		0x74

#define QG_S3_GOOD_OCV_I_DATA0_REG		0x76

#define QG_PRE_ESR_V_DATA0_REG			0x78

#define QG_PRE_ESR_I_DATA0_REG			0x7A

#define QG_POST_ESR_V_DATA0_REG			0x7C

#define QG_POST_ESR_I_DATA0_REG			0x7E

#define QG_V_ACCUM_DATA0_RT_REG			0x88

#define QG_I_ACCUM_DATA0_RT_REG			0x8B

#define QG_ACCUM_CNT_RT_REG			0x8E

#define QG_LAST_S3_SLEEP_V_DATA0_REG		0xCC

/* SDAM offsets */

#define QG_SDAM_VALID_OFFSET			0x46

#define QG_SDAM_SOC_OFFSET			0x47

#define QG_SDAM_TEMP_OFFSET			0x48

#define QG_SDAM_RBAT_OFFSET			0x4A

#define QG_SDAM_OCV_OFFSET			0x4C

#define QG_SDAM_IBAT_OFFSET			0x50

#define QG_SDAM_TIME_OFFSET			0x54

#define QG_SDAM_CYCLE_COUNT_OFFSET		0x58

#define QG_SDAM_LEARNED_CAPACITY_OFFSET		0x68

#define QG_SDAM_PON_OCV_OFFSET			0x7C

#define QG_SDAM_VALID_OFFSET			0x46 /* 1-byte 0x46 */

#define QG_SDAM_SOC_OFFSET			0x47 /* 1-byte 0x47 */

#define QG_SDAM_TEMP_OFFSET			0x48 /* 2-byte 0x48-0x49 */

#define QG_SDAM_RBAT_OFFSET			0x4A /* 2-byte 0x4A-0x4B */

#define QG_SDAM_OCV_OFFSET			0x4C /* 4-byte 0x4C-0x4F */

#define QG_SDAM_IBAT_OFFSET			0x50 /* 4-byte 0x50-0x53 */

#define QG_SDAM_TIME_OFFSET			0x54 /* 4-byte 0x54-0x57 */

#define QG_SDAM_CYCLE_COUNT_OFFSET		0x58 /* 16-byte 0x58-0x67 */

#define QG_SDAM_LEARNED_CAPACITY_OFFSET		0x68 /* 2-byte 0x68-0x69 */

#define QG_SDAM_ESR_CHARGE_DELTA_OFFSET		0x6A /* 4-byte 0x6A-0x6D */

#define QG_SDAM_ESR_DISCHARGE_DELTA_OFFSET	0x6E /* 4-byte 0x6E-0x71 */

#define QG_SDAM_ESR_CHARGE_SF_OFFSET		0x72 /* 2-byte 0x72-0x73 */

#define QG_SDAM_ESR_DISCHARGE_SF_OFFSET		0x74 /* 2-byte 0x74-0x75 */

#define QG_SDAM_MAX_OFFSET			0xA4

/* Below offset is used by PBS */

#define QG_SDAM_PON_OCV_OFFSET			0xBC /* 2-byte 0xBC-0xBD */

#endif