Merge "ARM: dts: msm: Add display support sm6150 based trinket interposer" (061aa191) · Commits · e / devices / android_kernel_oneplus_sm8150

arch/arm64/boot/dts/qcom/sm6150-interposer-trinket-idp-overlay.dts

+4 −0

Original line number	Diff line number	Diff line
		@@ -23,3 +23,7 @@
		qcom,msm-id = <355 0x0>;
		qcom,board-id = <34 0>;
		};

		&dsi_td4330_truly_vid_display {
		qcom,dsi-display-active;
		};

arch/arm64/boot/dts/qcom/sm6150-interposer-trinket-idp.dtsi

+43 −0

Original line number	Diff line number	Diff line
		@@ -13,6 +13,7 @@

		#include <dt-bindings/gpio/gpio.h>
		#include <dt-bindings/input/input.h>
		#include "sm6150-sde-display.dtsi"

		&pm6125_gpios {
		key_vol_up {
		@@ -45,3 +46,45 @@
		};
		};
		};

		&sde_dp {
		/delete-property/ qcom,dp-usbpd-detection;
		status = "disabled";
		};

		&mdss_dsi0 {
		vdda-1p2-supply = <&L18A>;
		};

		&mdss_dsi_phy0 {
		vdda-0p9-supply = <&L4A>;
		};

		&sde_dsi {
		vddio-supply = <&L9A>;
		};

		&mdss_mdp {
		connectors = <&sde_rscc &sde_wb &sde_dsi>;
		};

		&dsi_td4330_truly_video {
		qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
		qcom,mdss-dsi-bl-min-level = <1>;
		qcom,mdss-dsi-bl-max-level = <4095>;
		qcom,platform-reset-gpio = <&tlmm 91 0>;
		qcom,platform-en-gpio = <&pm6125_gpios 8 0>;
		qcom,platform-bklight-en-gpio = <&pmi632_gpios 6 0>;
		};

		&dsi_td4330_truly_cmd {
		qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
		qcom,mdss-dsi-bl-min-level = <1>;
		qcom,mdss-dsi-bl-max-level = <4095>;
		qcom,platform-te-gpio = <&tlmm 90 0>;
		qcom,platform-reset-gpio = <&tlmm 91 0>;
		qcom,platform-en-gpio = <&pm6125_gpios 8 0>;
		qcom,platform-bklight-en-gpio = <&pmi632_gpios 6 0>;
		};

arch/arm64/boot/dts/qcom/sm6150-sde-display.dtsi

+63 −1

Original line number	Diff line number	Diff line
		@@ -17,6 +17,8 @@
		#include "dsi-panel-td4328-1080p-cmd.dtsi"
		#include "dsi-panel-rm69298-truly-amoled-fhd-plus-video.dtsi"
		#include "dsi-panel-rm69298-truly-amoled-fhd-plus-cmd.dtsi"
		#include "dsi-panel-td4330-truly-singlemipi-fhd-cmd.dtsi"
		#include "dsi-panel-td4330-truly-singlemipi-fhd-video.dtsi"
		#include <dt-bindings/clock/mdss-14nm-pll-clk.h>

		&soc {
		@@ -170,6 +172,28 @@
		qcom,dsi-panel = <&dsi_rm69298_truly_amoled_cmd>;
		};

		dsi_td4330_truly_vid_display: qcom,dsi-display@7 {
		label = "dsi_td4330_truly_vid_display";
		qcom,display-type = "primary";

		qcom,dsi-ctrl-num = <0>;
		qcom,dsi-phy-num = <0>;
		qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0";

		qcom,dsi-panel = <&dsi_td4330_truly_video>;
		};

		dsi_td4330_truly_cmd_display: qcom,dsi-display@8 {
		label = "dsi_td4330_truly_cmd_display";
		qcom,display-type = "primary";

		qcom,dsi-ctrl-num = <0>;
		qcom,dsi-phy-num = <0>;
		qcom,dsi-select-clocks = "src_byte_clk0", "src_pixel_clk0";

		qcom,dsi-panel = <&dsi_td4330_truly_cmd>;
		};

		sde_dsi: qcom,dsi-display {
		compatible = "qcom,dsi-display";

		@@ -197,7 +221,9 @@
		&dsi_td4328_truly_vid_display
		&dsi_td4328_truly_cmd_display
		&dsi_rm69298_truly_amoled_vid_display
		&dsi_rm69298_truly_amoled_cmd_display>;
		&dsi_rm69298_truly_amoled_cmd_display
		&dsi_td4330_truly_vid_display
		&dsi_td4330_truly_cmd_display>;
		};

		sde_wb: qcom,wb-display@0 {
		@@ -402,3 +428,39 @@
		};
		};
		};

		&dsi_td4330_truly_cmd {
		qcom,mdss-dsi-t-clk-post = <0x0e>;
		qcom,mdss-dsi-t-clk-pre = <0x36>;
		qcom,mdss-dsi-display-timings {
		timing@0{
		qcom,mdss-dsi-panel-phy-timings =
		[26 20 09 0B 06 02 04 a0
		26 20 09 0B 06 02 04 a0
		26 20 09 0B 06 02 04 a0
		26 20 09 0B 06 02 04 a0
		26 1F 09 0B 06 02 04 a0];

		qcom,display-topology = <1 0 1>;
		qcom,default-topology-index = <0>;
		};
		};
		};

		&dsi_td4330_truly_video {
		qcom,mdss-dsi-t-clk-post = <0x0e>;
		qcom,mdss-dsi-t-clk-pre = <0x36>;
		qcom,mdss-dsi-display-timings {
		timing@0{
		qcom,mdss-dsi-panel-phy-timings =
		[26 20 09 0B 06 02 04 a0
		26 20 09 0B 06 02 04 a0
		26 20 09 0B 06 02 04 a0
		26 20 09 0B 06 02 04 a0
		26 1F 09 0B 06 02 04 a0];

		qcom,display-topology = <1 0 1>;
		qcom,default-topology-index = <0>;
		};
		};
		};