Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit f957bcf0 authored by Tobias Klauser's avatar Tobias Klauser Committed by David S. Miller
Browse files

s2io: Remove private boolean definitions 



Remove the private definition of TRUE/FALSE and use the ones from
linux/stddef.h. Also remove the definition of BOOL which is not referenced
inside the driver anyway.

Signed-off-by: default avatarTobias Klauser <tklauser@distanz.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent d65a68a8

drivers/net/s2io.c

+11 −11
Original line number Diff line number Diff line
@@ -1764,7 +1764,7 @@ static int init_nic(struct s2io_nic *nic) 
		 * by then we return error.

		 */

		time = 0;

		while (TRUE) {

		while (true) {

			val64 = readq(&bar0->rti_command_mem);

			if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD))

				break;
@@ -2137,7 +2137,7 @@ static int verify_pcc_quiescent(struct s2io_nic *sp, int flag) 


	herc = (sp->device_type == XFRAME_II_DEVICE);



	if (flag == FALSE) {

	if (flag == false) {

		if ((!herc && (sp->pdev->revision >= 4)) || herc) {

			if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE))

				ret = 1;
@@ -3587,7 +3587,7 @@ static void s2io_reset(struct s2io_nic * sp) 
		writeq(val64, &bar0->pcc_err_reg);

	}



	sp->device_enabled_once = FALSE;

	sp->device_enabled_once = false;

}



/**
@@ -5572,10 +5572,10 @@ static void s2io_ethtool_getpause_data(struct net_device *dev, 


	val64 = readq(&bar0->rmac_pause_cfg);

	if (val64 & RMAC_PAUSE_GEN_ENABLE)

		ep->tx_pause = TRUE;

		ep->tx_pause = true;

	if (val64 & RMAC_PAUSE_RX_ENABLE)

		ep->rx_pause = TRUE;

	ep->autoneg = FALSE;

		ep->rx_pause = true;

	ep->autoneg = false;

}



/**
@@ -6806,7 +6806,7 @@ static void s2io_set_link(struct work_struct *work) 
					val64 |= ADAPTER_LED_ON;

					writeq(val64, &bar0->adapter_control);

				}

				nic->device_enabled_once = TRUE;

				nic->device_enabled_once = true;

			} else {

				DBG_PRINT(ERR_DBG, "%s: Error: ", dev->name);

				DBG_PRINT(ERR_DBG, "device is not Quiescent\n");
@@ -7754,7 +7754,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) 
	struct s2io_nic *sp;

	struct net_device *dev;

	int i, j, ret;

	int dma_flag = FALSE;

	int dma_flag = false;

	u32 mac_up, mac_down;

	u64 val64 = 0, tmp64 = 0;

	struct XENA_dev_config __iomem *bar0 = NULL;
@@ -7777,7 +7777,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) 


	if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {

		DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 64bit DMA\n");

		dma_flag = TRUE;

		dma_flag = true;

		if (pci_set_consistent_dma_mask

		    (pdev, DMA_BIT_MASK(64))) {

			DBG_PRINT(ERR_DBG,
@@ -7818,7 +7818,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) 
	sp->dev = dev;

	sp->pdev = pdev;

	sp->high_dma_flag = dma_flag;

	sp->device_enabled_once = FALSE;

	sp->device_enabled_once = false;

	if (rx_ring_mode == 1)

		sp->rxd_mode = RXD_MODE_1;

	if (rx_ring_mode == 2)
@@ -7964,7 +7964,7 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) 
	dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;



	dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;

	if (sp->high_dma_flag == TRUE)

	if (sp->high_dma_flag == true)

		dev->features |= NETIF_F_HIGHDMA;

	dev->features |= NETIF_F_TSO;

	dev->features |= NETIF_F_TSO6;

drivers/net/s2io.h

+0 −9
Original line number Diff line number Diff line
@@ -18,15 +18,6 @@ 
#define vBIT(val, loc, sz)	(((u64)val) << (64-loc-sz))

#define INV(d)  ((d&0xff)<<24) | (((d>>8)&0xff)<<16) | (((d>>16)&0xff)<<8)| ((d>>24)&0xff)



#ifndef BOOL

#define BOOL    int

#endif



#ifndef TRUE

#define TRUE    1

#define FALSE   0

#endif



#undef SUCCESS

#define SUCCESS 0

#define FAILURE -1