Loading sound/arm/aaci.c +5 −1 Original line number Diff line number Diff line Loading @@ -501,6 +501,10 @@ static int aaci_pcm_hw_params(struct snd_pcm_substream *substream, int err; aaci_pcm_hw_free(substream); if (aacirun->pcm_open) { snd_ac97_pcm_close(aacirun->pcm); aacirun->pcm_open = 0; } err = devdma_hw_alloc(NULL, substream, params_buffer_bytes(params)); Loading @@ -514,7 +518,7 @@ static int aaci_pcm_hw_params(struct snd_pcm_substream *substream, else err = snd_ac97_pcm_open(aacirun->pcm, params_rate(params), params_channels(params), aacirun->pcm->r[1].slots); aacirun->pcm->r[0].slots); if (err) goto out; Loading sound/pci/hda/patch_conexant.c +12 −3 Original line number Diff line number Diff line Loading @@ -110,6 +110,7 @@ struct conexant_spec { unsigned int dell_automute; unsigned int port_d_mode; unsigned char ext_mic_bias; }; static int conexant_playback_pcm_open(struct hda_pcm_stream *hinfo, Loading Loading @@ -1927,6 +1928,11 @@ static hda_nid_t cxt5066_adc_nids[3] = { 0x14, 0x15, 0x16 }; static hda_nid_t cxt5066_capsrc_nids[1] = { 0x17 }; #define CXT5066_SPDIF_OUT 0x21 /* OLPC's microphone port is DC coupled for use with external sensors, * therefore we use a 50% mic bias in order to center the input signal with * the DC input range of the codec. */ #define CXT5066_OLPC_EXT_MIC_BIAS PIN_VREF50 static struct hda_channel_mode cxt5066_modes[1] = { { 2, NULL }, }; Loading Loading @@ -1980,9 +1986,10 @@ static int cxt5066_hp_master_sw_put(struct snd_kcontrol *kcontrol, /* toggle input of built-in and mic jack appropriately */ static void cxt5066_automic(struct hda_codec *codec) { static struct hda_verb ext_mic_present[] = { struct conexant_spec *spec = codec->spec; struct hda_verb ext_mic_present[] = { /* enable external mic, port B */ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, spec->ext_mic_bias}, /* switch to external mic input */ {0x17, AC_VERB_SET_CONNECT_SEL, 0}, Loading Loading @@ -2235,7 +2242,7 @@ static struct hda_verb cxt5066_init_verbs_olpc[] = { {0x19, AC_VERB_SET_CONNECT_SEL, 0x00}, /* DAC1 */ /* Port B: external microphone */ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, CXT5066_OLPC_EXT_MIC_BIAS}, /* Port C: internal microphone */ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, Loading Loading @@ -2353,6 +2360,7 @@ static int patch_cxt5066(struct hda_codec *codec) spec->input_mux = &cxt5066_capture_source; spec->port_d_mode = PIN_HP; spec->ext_mic_bias = PIN_VREF80; spec->num_init_verbs = 1; spec->init_verbs[0] = cxt5066_init_verbs; Loading Loading @@ -2384,6 +2392,7 @@ static int patch_cxt5066(struct hda_codec *codec) spec->mixers[spec->num_mixers++] = cxt5066_mixer_master_olpc; spec->mixers[spec->num_mixers++] = cxt5066_mixers; spec->port_d_mode = 0; spec->ext_mic_bias = CXT5066_OLPC_EXT_MIC_BIAS; /* no S/PDIF out */ spec->multiout.dig_out_nid = 0; Loading sound/pci/hda/patch_nvhdmi.c +2 −0 Original line number Diff line number Diff line Loading @@ -397,6 +397,7 @@ static int patch_nvhdmi_2ch(struct hda_codec *codec) static struct hda_codec_preset snd_hda_preset_nvhdmi[] = { { .id = 0x10de0002, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch }, { .id = 0x10de0003, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch }, { .id = 0x10de0005, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch }, { .id = 0x10de0006, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch }, { .id = 0x10de0007, .name = "MCP7A HDMI", .patch = patch_nvhdmi_8ch }, { .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi_2ch }, Loading @@ -406,6 +407,7 @@ static struct hda_codec_preset snd_hda_preset_nvhdmi[] = { MODULE_ALIAS("snd-hda-codec-id:10de0002"); MODULE_ALIAS("snd-hda-codec-id:10de0003"); MODULE_ALIAS("snd-hda-codec-id:10de0005"); MODULE_ALIAS("snd-hda-codec-id:10de0006"); MODULE_ALIAS("snd-hda-codec-id:10de0007"); MODULE_ALIAS("snd-hda-codec-id:10de0067"); Loading sound/pci/hda/patch_realtek.c +10 −7 Original line number Diff line number Diff line Loading @@ -4684,9 +4684,9 @@ static int alc880_parse_auto_config(struct hda_codec *codec) spec->multiout.dig_out_nid = dig_nid; else { spec->multiout.slave_dig_outs = spec->slave_dig_outs; spec->slave_dig_outs[i - 1] = dig_nid; if (i == ARRAY_SIZE(spec->slave_dig_outs) - 1) if (i >= ARRAY_SIZE(spec->slave_dig_outs) - 1) break; spec->slave_dig_outs[i - 1] = dig_nid; } } if (spec->autocfg.dig_in_pin) Loading Loading @@ -6249,7 +6249,7 @@ static struct snd_pci_quirk alc260_cfg_tbl[] = { SND_PCI_QUIRK(0x1025, 0x008f, "Acer", ALC260_ACER), SND_PCI_QUIRK(0x1509, 0x4540, "Favorit 100XS", ALC260_FAVORIT100), SND_PCI_QUIRK(0x103c, 0x2808, "HP d5700", ALC260_HP_3013), SND_PCI_QUIRK(0x103c, 0x280a, "HP d5750", ALC260_HP_3013), SND_PCI_QUIRK(0x103c, 0x280a, "HP d5750", ALC260_AUTO), /* no quirk */ SND_PCI_QUIRK(0x103c, 0x3010, "HP", ALC260_HP_3013), SND_PCI_QUIRK(0x103c, 0x3011, "HP", ALC260_HP_3013), SND_PCI_QUIRK(0x103c, 0x3012, "HP", ALC260_HP_DC7600), Loading Loading @@ -8911,10 +8911,11 @@ static struct snd_pci_quirk alc882_ssid_cfg_tbl[] = { SND_PCI_QUIRK(0x106b, 0x3800, "MacbookPro 4,1", ALC885_MBP3), SND_PCI_QUIRK(0x106b, 0x3e00, "iMac 24 Aluminum", ALC885_IMAC24), SND_PCI_QUIRK(0x106b, 0x3f00, "Macbook 5,1", ALC885_MB5), /* FIXME: HP jack sense seems not working for MBP 5,1, so apparently * no perfect solution yet /* FIXME: HP jack sense seems not working for MBP 5,1 or 5,2, * so apparently no perfect solution yet */ SND_PCI_QUIRK(0x106b, 0x4000, "MacbookPro 5,1", ALC885_MB5), SND_PCI_QUIRK(0x106b, 0x4600, "MacbookPro 5,2", ALC885_MB5), {} /* terminator */ }; Loading Loading @@ -9813,9 +9814,9 @@ static int alc882_parse_auto_config(struct hda_codec *codec) spec->multiout.dig_out_nid = dig_nid; else { spec->multiout.slave_dig_outs = spec->slave_dig_outs; spec->slave_dig_outs[i - 1] = dig_nid; if (i == ARRAY_SIZE(spec->slave_dig_outs) - 1) if (i >= ARRAY_SIZE(spec->slave_dig_outs) - 1) break; spec->slave_dig_outs[i - 1] = dig_nid; } } if (spec->autocfg.dig_in_pin) Loading Loading @@ -11460,6 +11461,8 @@ static struct snd_pci_quirk alc262_cfg_tbl[] = { SND_PCI_QUIRK(0x104d, 0x820f, "Sony ASSAMD", ALC262_SONY_ASSAMD), SND_PCI_QUIRK(0x104d, 0x9016, "Sony VAIO", ALC262_AUTO), /* dig-only */ SND_PCI_QUIRK(0x104d, 0x9025, "Sony VAIO Z21MN", ALC262_TOSHIBA_S06), SND_PCI_QUIRK(0x104d, 0x9035, "Sony VAIO VGN-FW170J", ALC262_AUTO), SND_PCI_QUIRK(0x104d, 0x9047, "Sony VAIO Type G", ALC262_AUTO), SND_PCI_QUIRK_MASK(0x104d, 0xff00, 0x9000, "Sony VAIO", ALC262_SONY_ASSAMD), SND_PCI_QUIRK(0x1179, 0x0001, "Toshiba dynabook SS RX1", Loading sound/pci/hda/patch_sigmatel.c +2 −0 Original line number Diff line number Diff line Loading @@ -1590,6 +1590,8 @@ static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = { "Dell Studio 17", STAC_DELL_M6_DMIC), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02be, "Dell Studio 1555", STAC_DELL_M6_DMIC), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02bd, "Dell Studio 1557", STAC_DELL_M6_DMIC), {} /* terminator */ }; Loading Loading
sound/arm/aaci.c +5 −1 Original line number Diff line number Diff line Loading @@ -501,6 +501,10 @@ static int aaci_pcm_hw_params(struct snd_pcm_substream *substream, int err; aaci_pcm_hw_free(substream); if (aacirun->pcm_open) { snd_ac97_pcm_close(aacirun->pcm); aacirun->pcm_open = 0; } err = devdma_hw_alloc(NULL, substream, params_buffer_bytes(params)); Loading @@ -514,7 +518,7 @@ static int aaci_pcm_hw_params(struct snd_pcm_substream *substream, else err = snd_ac97_pcm_open(aacirun->pcm, params_rate(params), params_channels(params), aacirun->pcm->r[1].slots); aacirun->pcm->r[0].slots); if (err) goto out; Loading
sound/pci/hda/patch_conexant.c +12 −3 Original line number Diff line number Diff line Loading @@ -110,6 +110,7 @@ struct conexant_spec { unsigned int dell_automute; unsigned int port_d_mode; unsigned char ext_mic_bias; }; static int conexant_playback_pcm_open(struct hda_pcm_stream *hinfo, Loading Loading @@ -1927,6 +1928,11 @@ static hda_nid_t cxt5066_adc_nids[3] = { 0x14, 0x15, 0x16 }; static hda_nid_t cxt5066_capsrc_nids[1] = { 0x17 }; #define CXT5066_SPDIF_OUT 0x21 /* OLPC's microphone port is DC coupled for use with external sensors, * therefore we use a 50% mic bias in order to center the input signal with * the DC input range of the codec. */ #define CXT5066_OLPC_EXT_MIC_BIAS PIN_VREF50 static struct hda_channel_mode cxt5066_modes[1] = { { 2, NULL }, }; Loading Loading @@ -1980,9 +1986,10 @@ static int cxt5066_hp_master_sw_put(struct snd_kcontrol *kcontrol, /* toggle input of built-in and mic jack appropriately */ static void cxt5066_automic(struct hda_codec *codec) { static struct hda_verb ext_mic_present[] = { struct conexant_spec *spec = codec->spec; struct hda_verb ext_mic_present[] = { /* enable external mic, port B */ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, spec->ext_mic_bias}, /* switch to external mic input */ {0x17, AC_VERB_SET_CONNECT_SEL, 0}, Loading Loading @@ -2235,7 +2242,7 @@ static struct hda_verb cxt5066_init_verbs_olpc[] = { {0x19, AC_VERB_SET_CONNECT_SEL, 0x00}, /* DAC1 */ /* Port B: external microphone */ {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, {0x1a, AC_VERB_SET_PIN_WIDGET_CONTROL, CXT5066_OLPC_EXT_MIC_BIAS}, /* Port C: internal microphone */ {0x1b, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, Loading Loading @@ -2353,6 +2360,7 @@ static int patch_cxt5066(struct hda_codec *codec) spec->input_mux = &cxt5066_capture_source; spec->port_d_mode = PIN_HP; spec->ext_mic_bias = PIN_VREF80; spec->num_init_verbs = 1; spec->init_verbs[0] = cxt5066_init_verbs; Loading Loading @@ -2384,6 +2392,7 @@ static int patch_cxt5066(struct hda_codec *codec) spec->mixers[spec->num_mixers++] = cxt5066_mixer_master_olpc; spec->mixers[spec->num_mixers++] = cxt5066_mixers; spec->port_d_mode = 0; spec->ext_mic_bias = CXT5066_OLPC_EXT_MIC_BIAS; /* no S/PDIF out */ spec->multiout.dig_out_nid = 0; Loading
sound/pci/hda/patch_nvhdmi.c +2 −0 Original line number Diff line number Diff line Loading @@ -397,6 +397,7 @@ static int patch_nvhdmi_2ch(struct hda_codec *codec) static struct hda_codec_preset snd_hda_preset_nvhdmi[] = { { .id = 0x10de0002, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch }, { .id = 0x10de0003, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch }, { .id = 0x10de0005, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch }, { .id = 0x10de0006, .name = "MCP78 HDMI", .patch = patch_nvhdmi_8ch }, { .id = 0x10de0007, .name = "MCP7A HDMI", .patch = patch_nvhdmi_8ch }, { .id = 0x10de0067, .name = "MCP67 HDMI", .patch = patch_nvhdmi_2ch }, Loading @@ -406,6 +407,7 @@ static struct hda_codec_preset snd_hda_preset_nvhdmi[] = { MODULE_ALIAS("snd-hda-codec-id:10de0002"); MODULE_ALIAS("snd-hda-codec-id:10de0003"); MODULE_ALIAS("snd-hda-codec-id:10de0005"); MODULE_ALIAS("snd-hda-codec-id:10de0006"); MODULE_ALIAS("snd-hda-codec-id:10de0007"); MODULE_ALIAS("snd-hda-codec-id:10de0067"); Loading
sound/pci/hda/patch_realtek.c +10 −7 Original line number Diff line number Diff line Loading @@ -4684,9 +4684,9 @@ static int alc880_parse_auto_config(struct hda_codec *codec) spec->multiout.dig_out_nid = dig_nid; else { spec->multiout.slave_dig_outs = spec->slave_dig_outs; spec->slave_dig_outs[i - 1] = dig_nid; if (i == ARRAY_SIZE(spec->slave_dig_outs) - 1) if (i >= ARRAY_SIZE(spec->slave_dig_outs) - 1) break; spec->slave_dig_outs[i - 1] = dig_nid; } } if (spec->autocfg.dig_in_pin) Loading Loading @@ -6249,7 +6249,7 @@ static struct snd_pci_quirk alc260_cfg_tbl[] = { SND_PCI_QUIRK(0x1025, 0x008f, "Acer", ALC260_ACER), SND_PCI_QUIRK(0x1509, 0x4540, "Favorit 100XS", ALC260_FAVORIT100), SND_PCI_QUIRK(0x103c, 0x2808, "HP d5700", ALC260_HP_3013), SND_PCI_QUIRK(0x103c, 0x280a, "HP d5750", ALC260_HP_3013), SND_PCI_QUIRK(0x103c, 0x280a, "HP d5750", ALC260_AUTO), /* no quirk */ SND_PCI_QUIRK(0x103c, 0x3010, "HP", ALC260_HP_3013), SND_PCI_QUIRK(0x103c, 0x3011, "HP", ALC260_HP_3013), SND_PCI_QUIRK(0x103c, 0x3012, "HP", ALC260_HP_DC7600), Loading Loading @@ -8911,10 +8911,11 @@ static struct snd_pci_quirk alc882_ssid_cfg_tbl[] = { SND_PCI_QUIRK(0x106b, 0x3800, "MacbookPro 4,1", ALC885_MBP3), SND_PCI_QUIRK(0x106b, 0x3e00, "iMac 24 Aluminum", ALC885_IMAC24), SND_PCI_QUIRK(0x106b, 0x3f00, "Macbook 5,1", ALC885_MB5), /* FIXME: HP jack sense seems not working for MBP 5,1, so apparently * no perfect solution yet /* FIXME: HP jack sense seems not working for MBP 5,1 or 5,2, * so apparently no perfect solution yet */ SND_PCI_QUIRK(0x106b, 0x4000, "MacbookPro 5,1", ALC885_MB5), SND_PCI_QUIRK(0x106b, 0x4600, "MacbookPro 5,2", ALC885_MB5), {} /* terminator */ }; Loading Loading @@ -9813,9 +9814,9 @@ static int alc882_parse_auto_config(struct hda_codec *codec) spec->multiout.dig_out_nid = dig_nid; else { spec->multiout.slave_dig_outs = spec->slave_dig_outs; spec->slave_dig_outs[i - 1] = dig_nid; if (i == ARRAY_SIZE(spec->slave_dig_outs) - 1) if (i >= ARRAY_SIZE(spec->slave_dig_outs) - 1) break; spec->slave_dig_outs[i - 1] = dig_nid; } } if (spec->autocfg.dig_in_pin) Loading Loading @@ -11460,6 +11461,8 @@ static struct snd_pci_quirk alc262_cfg_tbl[] = { SND_PCI_QUIRK(0x104d, 0x820f, "Sony ASSAMD", ALC262_SONY_ASSAMD), SND_PCI_QUIRK(0x104d, 0x9016, "Sony VAIO", ALC262_AUTO), /* dig-only */ SND_PCI_QUIRK(0x104d, 0x9025, "Sony VAIO Z21MN", ALC262_TOSHIBA_S06), SND_PCI_QUIRK(0x104d, 0x9035, "Sony VAIO VGN-FW170J", ALC262_AUTO), SND_PCI_QUIRK(0x104d, 0x9047, "Sony VAIO Type G", ALC262_AUTO), SND_PCI_QUIRK_MASK(0x104d, 0xff00, 0x9000, "Sony VAIO", ALC262_SONY_ASSAMD), SND_PCI_QUIRK(0x1179, 0x0001, "Toshiba dynabook SS RX1", Loading
sound/pci/hda/patch_sigmatel.c +2 −0 Original line number Diff line number Diff line Loading @@ -1590,6 +1590,8 @@ static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = { "Dell Studio 17", STAC_DELL_M6_DMIC), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02be, "Dell Studio 1555", STAC_DELL_M6_DMIC), SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02bd, "Dell Studio 1557", STAC_DELL_M6_DMIC), {} /* terminator */ }; Loading