Merge "ARM: dts: msm: Add pmic support for khaje" (eb0f80d1) · Commits · e / devices / android_kernel_oneplus_sm7250

qcom/bengal-pinctrl.dtsi

+1 −1

Original line number	Diff line number	Diff line
		@@ -1183,7 +1183,7 @@

		pm8008_interrupt: pm8008_interrupt {
		mux {
		pins = "gpior25";
		pins = "gpio25";
		function = "gpio";
		};

qcom/khaje-idp-pm7250b.dtsi

+88 −0

Original line number	Diff line number	Diff line
		@@ -4,3 +4,91 @@
		/delete-property/ lab-supply;
		/delete-property/ ibb-supply;
		};

		&soc {
		mtp_batterydata: qcom,battery-data {
		qcom,batt-id-range-pct = <15>;
		#include "qg-batterydata-alium-3600mah.dtsi"
		};
		};

		&pm7250b_gpios {
		pm7250b_smb_int_default: pm7250b_smb_int_default {
		pins = "gpio6";
		function = "func1";
		input-enable;
		};
		};

		&qupv3_se1_i2c {
		status = "ok";
		#include "smb1355.dtsi"
		};

		&smb1355 {
		pinctrl-names = "default";
		pinctrl-0 = <&pm7250b_smb_int_default>;
		status = "ok";
		};

		&smb1355_charger {
		qcom,parallel-mode = <1>;
		qcom,hw-die-temp-mitigation;
		status = "ok";
		};

		&pm7250b_charger {
		status = "ok";
		io-channels = <&pm7250b_vadc ADC_USB_IN_V_16>,
		<&pm7250b_vadc ADC_USB_IN_I>,
		<&pm7250b_vadc ADC_CHG_TEMP>,
		<&pm7250b_vadc ADC_DIE_TEMP>,
		<&pm7250b_vadc ADC_AMUX_THM3_PU2>,
		<&pm7250b_vadc ADC_SBUx>,
		<&pm7250b_vadc ADC_VPH_PWR>,
		<&pm7250b_vadc ADC_AMUX_THM1_PU2>;
		io-channel-names = "usb_in_voltage",
		"usb_in_current",
		"chg_temp",
		"die_temp",
		"conn_temp",
		"sbux_res",
		"vph_voltage",
		"skin_temp";
		qcom,battery-data = <&mtp_batterydata>;
		qcom,sec-charger-config = <1>;
		qcom,auto-recharge-soc = <98>;
		qcom,step-charging-enable;
		qcom,sw-jeita-enable;
		qcom,charger-temp-max = <800>;
		qcom,smb-temp-max = <800>;
		qcom,suspend-input-on-debug-batt;
		qcom,fcc-stepping-enable;
		qcom,fcc-step-delay-ms = <100>;
		qcom,fcc-step-size-ua = <100000>;
		qcom,smb-internal-pull-kohm = <0>;
		qcom,en-skin-therm-mitigation;
		qcom,hvdcp3-standalone-config;
		};

		&pm7250b_qg {
		status = "ok";
		io-channels = <&pm7250b_vadc ADC_BAT_THERM_PU2>,
		<&pm7250b_vadc ADC_BAT_ID_PU2>;
		io-channel-names = "batt-therm",
		"batt-id";
		qcom,battery-data = <&mtp_batterydata>;
		qcom,qg-iterm-ma = <100>;
		qcom,hold-soc-while-full;
		qcom,linearize-soc;
		qcom,cl-feedback-on;
		qcom,tcss-enable;
		qcom,fvss-enable;
		qcom,fvss-vbatt-mv = <3500>;
		qcom,bass-enable;
		qcom,vbatt-cutoff-mv = <3400>;
		qcom,vbatt-low-mv = <3500>;
		qcom,vbatt-low-cold-mv = <3800>;
		qcom,vbatt-empty-mv = <3200>;
		qcom,vbatt-empty-cold-mv = <3100>;
		};

qcom/khaje-idp.dtsi

+0 −20

Original line number	Diff line number	Diff line
		@@ -5,11 +5,6 @@
		#include "bengal-thermal-overlay.dtsi"
		#include "bengal-sde-display.dtsi"

		&qupv3_se1_i2c {
		status = "ok";
		#include "smb1355.dtsi"
		};

		&qupv3_se4_2uart {
		status = "ok";
		};
		@@ -118,21 +113,6 @@
		};
		};

		&tlmm {
		smb_int_default: smb_int_default {
		mux {
		pins = "gpio105";
		function = "gpio";
		};

		config {
		pins = "gpio105";
		bias-pull-up;
		input-enable;
		};
		};
		};

		&sdhc_1 {
		vdd-supply = <&L24A>;
		qcom,vdd-voltage-level = <2960000 2960000>;

qcom/khaje-pm7250b.dtsi

+74 −2

Original line number	Diff line number	Diff line
		/update the 7250b as per khaje/
		/#include "pm7250b.dtsi"/
		#include <dt-bindings/clock/qcom,rpmcc.h>
		#include <dt-bindings/clock/qcom,rpmh.h>
		#include "pm7250b.dtsi"

		&pm7250b_clkdiv {
		clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>;
		};

		&pm7250b_vadc {
		charger_skin_therm@4d {
		reg = <ADC_AMUX_THM1_PU2>;
		label = "charger_skin_therm";
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
		};

		conn_therm@4f {
		reg = <ADC_AMUX_THM3_PU2>;
		label = "conn_therm";
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		qcom,pre-scaling = <1 1>;
		};
		};

		&pm7250b_adc_tm {
		io-channels = <&pm7250b_vadc ADC_AMUX_THM1_PU2>,
		<&pm7250b_vadc ADC_AMUX_THM3_PU2>;

		/* Channel nodes */
		charger_skin_therm@4d {
		reg = <ADC_AMUX_THM1_PU2>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		};

		conn_therm@4f {
		reg = <ADC_AMUX_THM3_PU2>;
		qcom,ratiometric;
		qcom,hw-settle-time = <200>;
		};
		};

		&thermal_zones {
		charger-therm-usr {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "user_space";
		thermal-sensors = <&pm7250b_adc_tm ADC_AMUX_THM1_PU2>;
		wake-capable-sensor;
		trips {
		active-config0 {
		temperature = <125000>;
		hysteresis = <1000>;
		type = "passive";
		};
		};
		};

		conn-therm-usr {
		polling-delay-passive = <0>;
		polling-delay = <0>;
		thermal-governor = "user_space";
		thermal-sensors = <&pm7250b_adc_tm ADC_AMUX_THM3_PU2>;
		wake-capable-sensor;
		trips {
		active-config0 {
		temperature = <125000>;
		hysteresis = <1000>;
		type = "passive";
		};
		};
		};
		};

qcom/khaje.dtsi

+21 −13

Original line number	Diff line number	Diff line
		@@ -2995,41 +2995,49 @@ tpdm_turing_llm: tpdm@8861000 {

		&pm8008_regulators {
		vdd_l1_l2-supply = <&S6A>;
		vdd_l7-supply = <&S7A>;
		};

		&L1P {
		regulator-max-microvolt = <1200000>;
		qcom,min-dropout-voltage = <100000>;
		regulator-min-microvolt = <1100000>;
		regulator-max-microvolt = <1300000>;
		qcom,min-dropout-voltage = <56000>;
		};

		&L2P {
		regulator-max-microvolt = <1056000>;
		qcom,min-dropout-voltage = <100000>;
		regulator-min-microvolt = <950000>;
		regulator-max-microvolt = <1150000>;
		qcom,min-dropout-voltage = <96000>;
		};

		&L3P {
		regulator-min-microvolt = <2800000>;
		regulator-max-microvolt = <2800000>;
		regulator-min-microvolt = <2700000>;
		regulator-max-microvolt = <2900000>;
		qcom,min-dropout-voltage = <96000>;
		};

		&L4P {
		regulator-min-microvolt = <2800000>;
		regulator-max-microvolt = <2800000>;
		regulator-min-microvolt = <2700000>;
		regulator-max-microvolt = <2900000>;
		qcom,min-dropout-voltage = <136000>;
		};

		&L5P {
		regulator-min-microvolt = <2800000>;
		regulator-max-microvolt = <2800000>;
		regulator-min-microvolt = <2700000>;
		regulator-max-microvolt = <2900000>;
		qcom,min-dropout-voltage = <240000>;
		};

		&L6P {
		regulator-min-microvolt = <2800000>;
		regulator-max-microvolt = <2800000>;
		regulator-min-microvolt = <2700000>;
		regulator-max-microvolt = <2900000>;
		qcom,min-dropout-voltage = <168000>;
		};

		&L7P {
		regulator-min-microvolt = <1800000>;
		regulator-min-microvolt = <1650000>;
		regulator-max-microvolt = <1800000>;
		qcom,min-dropout-voltage = <112000>;
		};

		&qupv3_se4_2uart {