ARM: dts: add buffalo linkstation ls-wxl/wsxl (e54e4b1b) · Commits · e / devices / android_kernel_oneplus_sm7250

Documentation/devicetree/bindings/arm/marvell,kirkwood.txt

+1 −0

Original line number	Original line	Diff line number	Diff line
	@@ -20,6 +20,7 @@ And in addition, the compatible shall be extended with the specific
	board. Currently known boards are:		board. Currently known boards are:

	"buffalo,lschlv2"		"buffalo,lschlv2"
			"buffalo,lswxl"
	"buffalo,lsxhl"		"buffalo,lsxhl"
	"buffalo,lsxl"		"buffalo,lsxl"
	"dlink,dns-320"		"dlink,dns-320"

arch/arm/boot/dts/Makefile

+1 −0

Original line number	Original line	Diff line number	Diff line
	@@ -176,6 +176,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
	kirkwood-km_kirkwood.dtb \		kirkwood-km_kirkwood.dtb \
	kirkwood-laplug.dtb \		kirkwood-laplug.dtb \
	kirkwood-lschlv2.dtb \		kirkwood-lschlv2.dtb \
			kirkwood-lswxl.dtb \
	kirkwood-lsxhl.dtb \		kirkwood-lsxhl.dtb \
	kirkwood-mplcec4.dtb \		kirkwood-mplcec4.dtb \
	kirkwood-mv88f6281gtw-ge.dtb \		kirkwood-mv88f6281gtw-ge.dtb \

arch/arm/boot/dts/kirkwood-lswxl.dts

0 → 100644

+301 −0

Original line number	Original line	Diff line number	Diff line
			/*
			* Device Tree file for Buffalo Linkstation LS-WXL/WSXL
			*
			* Copyright (C) 2015, rogershimizu@gmail.com
			*
			* This program is free software; you can redistribute it and/or
			* modify it under the terms of the GNU General Public License
			* as published by the Free Software Foundation; either version
			* 2 of the License, or (at your option) any later version.
			*/

			/dts-v1/;

			#include "kirkwood.dtsi"
			#include "kirkwood-6281.dtsi"

			/ {
			model = "Buffalo Linkstation LS-WXL/WSXL";
			compatible = "buffalo,lswxl", "marvell,kirkwood-88f6281", "marvell,kirkwood";

			memory { /* 128 MB */
			device_type = "memory";
			reg = <0x00000000 0x8000000>;
			};

			chosen {
			bootargs = "console=ttyS0,115200n8 earlyprintk";
			stdout-path = &uart0;
			};

			mbus {
			pcie-controller {
			status = "okay";
			pcie@1,0 {
			status = "okay";
			};
			};
			};

			ocp@f1000000 {
			pinctrl: pin-controller@10000 {
			pmx_power_hdd0: pmx-power-hdd0 {
			marvell,pins = "mpp28";
			marvell,function = "gpio";
			};
			pmx_power_hdd1: pmx-power-hdd1 {
			marvell,pins = "mpp29";
			marvell,function = "gpio";
			};
			pmx_usb_vbus: pmx-usb-vbus {
			marvell,pins = "mpp37";
			marvell,function = "gpio";
			};
			pmx_fan_high: pmx-fan-high {
			marvell,pins = "mpp47";
			marvell,function = "gpio";
			};
			pmx_fan_low: pmx-fan-low {
			marvell,pins = "mpp48";
			marvell,function = "gpio";
			};
			pmx_led_hdderr0: pmx-led-hdderr0 {
			marvell,pins = "mpp8";
			marvell,function = "gpio";
			};
			pmx_led_hdderr1: pmx-led-hdderr1 {
			marvell,pins = "mpp46";
			marvell,function = "gpio";
			};
			pmx_led_alarm: pmx-led-alarm {
			marvell,pins = "mpp49";
			marvell,function = "gpio";
			};
			pmx_led_function_red: pmx-led-function-red {
			marvell,pins = "mpp34";
			marvell,function = "gpio";
			};
			pmx_led_function_blue: pmx-led-function-blue {
			marvell,pins = "mpp36";
			marvell,function = "gpio";
			};
			pmx_led_info: pmx-led-info {
			marvell,pins = "mpp38";
			marvell,function = "gpio";
			};
			pmx_led_power: pmx-led-power {
			marvell,pins = "mpp39";
			marvell,function = "gpio";
			};
			pmx_fan_lock: pmx-fan-lock {
			marvell,pins = "mpp40";
			marvell,function = "gpio";
			};
			pmx_button_function: pmx-button-function {
			marvell,pins = "mpp41";
			marvell,function = "gpio";
			};
			pmx_power_switch: pmx-power-switch {
			marvell,pins = "mpp42";
			marvell,function = "gpio";
			};
			pmx_power_auto_switch: pmx-power-auto-switch {
			marvell,pins = "mpp43";
			marvell,function = "gpio";
			};
			};

			serial@12000 {
			status = "okay";
			};

			sata@80000 {
			status = "okay";
			nr-ports = <2>;
			};

			spi@10600 {
			status = "okay";

			m25p40@0 {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "st,m25p40", "jedec,spi-nor";
			reg = <0>;
			spi-max-frequency = <25000000>;
			mode = <0>;

			partition@0 {
			reg = <0x0 0x60000>;
			label = "uboot";
			read-only;
			};

			partition@60000 {
			reg = <0x60000 0x10000>;
			label = "dtb";
			read-only;
			};

			partition@70000 {
			reg = <0x70000 0x10000>;
			label = "uboot_env";
			};
			};
			};
			};

			gpio_keys {
			compatible = "gpio-keys";
			#address-cells = <1>;
			#size-cells = <0>;
			pinctrl-0 = <&pmx_button_function &pmx_power_switch
			&pmx_power_auto_switch>;
			pinctrl-names = "default";

			button@1 {
			label = "Function Button";
			linux,code = <KEY_OPTION>;
			gpios = <&gpio1 41 GPIO_ACTIVE_LOW>;
			};

			button@2 {
			label = "Power-on Switch";
			linux,code = <KEY_RESERVED>;
			linux,input-type = <5>;
			gpios = <&gpio1 42 GPIO_ACTIVE_LOW>;
			};

			button@3 {
			label = "Power-auto Switch";
			linux,code = <KEY_ESC>;
			linux,input-type = <5>;
			gpios = <&gpio1 43 GPIO_ACTIVE_LOW>;
			};
			};

			gpio_leds {
			compatible = "gpio-leds";
			pinctrl-0 = <&pmx_led_function_red &pmx_led_alarm
			&pmx_led_info &pmx_led_power
			&pmx_led_function_blue
			&pmx_led_hdderr0
			&pmx_led_hdderr1>;
			pinctrl-names = "default";

			led@1 {
			label = "lswxl:blue:func";
			gpios = <&gpio1 36 GPIO_ACTIVE_LOW>;
			};

			led@2 {
			label = "lswxl:red:alarm";
			gpios = <&gpio1 49 GPIO_ACTIVE_LOW>;
			};

			led@3 {
			label = "lswxl:amber:info";
			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
			};

			led@4 {
			label = "lswxl:blue:power";
			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
			};

			led@5 {
			label = "lswxl:red:func";
			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
			default-state = "keep";
			};

			led@6 {
			label = "lswxl:red:hdderr0";
			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
			};

			led@7 {
			label = "lswxl:red:hdderr1";
			gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
			};
			};

			gpio_fan {
			compatible = "gpio-fan";
			pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>;
			pinctrl-names = "default";

			gpios = <&gpio0 47 GPIO_ACTIVE_LOW
			&gpio0 48 GPIO_ACTIVE_LOW>;

			gpio-fan,speed-map = <0 3
			1500 2
			3250 1
			5000 0>;

			alarm-gpios = <&gpio1 49 GPIO_ACTIVE_HIGH>;
			};

			restart_poweroff {
			compatible = "restart-poweroff";
			};

			regulators {
			compatible = "simple-bus";
			#address-cells = <1>;
			#size-cells = <0>;
			pinctrl-0 = <&pmx_power_hdd0 &pmx_power_hdd1 &pmx_usb_vbus>;
			pinctrl-names = "default";

			usb_power: regulator@1 {
			compatible = "regulator-fixed";
			reg = <1>;
			regulator-name = "USB Power";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			enable-active-high;
			regulator-always-on;
			regulator-boot-on;
			gpio = <&gpio0 37 GPIO_ACTIVE_HIGH>;
			};
			hdd_power0: regulator@2 {
			compatible = "regulator-fixed";
			reg = <2>;
			regulator-name = "HDD0 Power";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			enable-active-high;
			regulator-always-on;
			regulator-boot-on;
			gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
			};
			hdd_power1: regulator@3 {
			compatible = "regulator-fixed";
			reg = <3>;
			regulator-name = "HDD1 Power";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			enable-active-high;
			regulator-always-on;
			regulator-boot-on;
			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
			};
			};
			};

			&mdio {
			status = "okay";

			ethphy1: ethernet-phy@8 {
			device_type = "ethernet-phy";
			reg = <8>;
			};
			};

			&eth1 {
			status = "okay";

			ethernet1-port@0 {
			phy-handle = <&ethphy1>;
			};
			};