Merge "dt-bindings: Add documentation for MSM8917/MSM8937"

- BENGALP-IOT

  compatible = "qcom,bengalp-iot"

- MSM8917

  compatible = "qcom,msm8917"

- MSM8937

  compatible = "qcom,msm8937"

- SDM439

  compatible = "qcom,sdm439"

- SDA439

  compatible = "qcom,sda439"

- SDM429

  compatible = "qcom,sdm429"

- SDA429

  compatible = "qcom,sda429"

- QM215

  compatible = "qcom,qm215"

- QCM2150

  compatible = "qcom,qcm2150"

- MSM8953

  compatible = "qcom,msm8953"

- SDM450

  compatible = "qcom,sdm450"

- SDA450

  compatible = "qcom,sda450"

Generic board variants:

- CDP device:

compatible = "qcom,bengalp-iot"

compatible = "qcom,bengal-iot-idp"

compatible = "qcom,bengalp-iot-idp"

compatible = "qcom,msm8917-cdp"

compatible = "qcom,msm8917-mtp"

compatible = "qcom,msm8917-rumi"

compatible = "qcom,msm8917-qrd"

compatible = "qcom,msm8917-qrd-sku5"

compatible = "qcom,msm8937-rumi"

compatible = "qcom,msm8937-cdp"

compatible = "qcom,msm8937-mtp"

compatible = "qcom,msm8937-qrd"

compatible = "qcom,msm8937-pmi8950-qrd-sku1"

compatible = "qcom,msm8937-pmi8937-qrd-sku2"

compatible = "qcom,sdm429-cdp"

compatible = "qcom,sdm429-mtp"

compatible = "qcom,sdm429-qrd"

compatible = "qcom,sda429-cdp"

compatible = "qcom,sda429-mtp"

compatible = "qcom,sdm439-cdp"

compatible = "qcom,sdm439-mtp"

compatible = "qcom,sdm439-qrd"

compatible = "qcom,sda439-cdp"

compatible = "qcom,sda439-mtp"

compatible = "qcom,qm215-qrd"

compatible = "qcom,qcm2150-qrd"

compatible = "qcom,msm8953-rumi"

compatible = "qcom,msm8953-sim"

compatible = "qcom,msm8953-cdp"

compatible = "qcom,msm8953-mtp"

compatible = "qcom,sdm450-mtp"

compatible = "qcom,sdm450-cdp"

compatible = "qcom,sdm450-qrd"

compatible = "qcom,sda450-mtp"

compatible = "qcom,sda450-cdp"

Qualcomm Technologies, Inc Shared Memory Packet Driver (smdpkt)

[Root level node]

Required properties:

-compatible : should be "qcom,smdpkt"

[Second level nodes]

qcom,smdpkt-port-names

Required properties:

-qcom,smdpkt-remote : the remote subsystem name

-qcom,smdpkt-port-name : the smd channel name

-qcom,smdpkt-dev-name : the smdpkt device name

Example:

	qcom,smdpkt {

		compatible = "qcom,smdpkt";

		qcom,smdpkt-data5-cntl {

			qcom,smdpkt-remote = "modem";

			qcom,smdpkt-port-name = "DATA5_CNTL";

			qcom,smdpkt-dev-name = "smdcntl0";

		};

		qcom,smdpkt-data6-cntl {

			qcom,smdpkt-remote = "modem";

			qcom,smdpkt-port-name = "DATA6_CNTL";

			qcom,smdpkt-dev-name = "smdcntl1";

		};

		qcom,smdpkt-cxm-qmi-port-8064 {

			qcom,smdpkt-remote = "wcnss";

			qcom,smdpkt-port-name = "CXM_QMI_PORT_8064";

			qcom,smdpkt-dev-name = "smd_cxm_qmi";

		};

		qcom,smdpkt-loopback {

			qcom,smdpkt-remote = "modem";

			qcom,smdpkt-port-name = "LOOPBACK";

			qcom,smdpkt-dev-name = "smd_pkt_loopback";

		};

	};

Qualcomm Technologies, Inc Shared Memory TTY Driver (smdtty)

[Root level node]

Required properties:

-compatible : should be "qcom,smdtty"

[Second level nodes]

qcom,smdtty-port-names

Required properties:

-qcom,smdtty-remote: the remote subsystem name

-qcom,smdtty-port-name : the smd channel name

Optional properties:

-qcom,smdtty-dev-name : the smdtty device name

Required alias:

- The index into TTY subsystem is specified via an alias with the following format

         'smd{n}' where n is the tty device index.

Example:

	aliases {

		smd1 = &smdtty_apps_fm;

		smd36 = &smdtty_loopback;

	};

	qcom,smdtty {

		compatible = "qcom,smdtty";

		smdtty_apps_fm: qcom,smdtty-apps-fm {

			qcom,smdtty-remote = "wcnss";

			qcom,smdtty-port-name = "APPS_FM";

		};

		smdtty_loopback: smdtty-loopback {

			qcom,smdtty-remote = "modem";

			qcom,smdtty-port-name = "LOOPBACK";

			qcom,smdtty-dev-name = "LOOPBACK_TTY";

		};

	};

Qualcomm Technologies, Inc. QPNP LEDs

Qualcomm Technologies, Inc. Plug N Play (QPNP) LED modules

are used for controlling LEDs that are connected to a QPNP PMIC.

The PMIC is connected to a host processor via the SPMI bus.  Various

LED modules are supported such as Keypad backlight, WLED (white LED),

RGB LED and flash LED.

Each LED module is represented as a node of "leds-qpnp". This

node will further contain the type of LED supported and its

properties.  At least one child node is required for each LED

module.  Each must have the required properties below, in addition

to the properties for the LED type, WLED, Flash, RGB and MPP.

Required properties for each child node, WLED, Flash and RGB:

- compatible		: should be "qcom,leds-qpnp"

- qcom,id		: must be one of values supported in enum qpnp_led

- label			: type of led that will be used, ie "wled"

- qcom,max-current	: maximum current that the LED can sustain in mA

- linux,name		: name of the led that is used in led framework

Optional properties for each child node, WLED, Flash, MPP, RGB and KPDBL:

- qcom,in-order-command-processing : specify if user space requests leds in order

WLED is primarily used as display backlight. Display subsystem uses

LED triggers for WLED to control the brightness as needed.

Optional properties for WLED:

- qcom,num-strings: number of wled strings to be configured

- qcom,num-physical-strings: number of physical wled strings supported

- qcom,ovp-val: over voltage protection threshold,

		follows enum wled_ovp_threshold

- qcom,boost-curr-lim: boot currnet limit, follows enum wled_current_bost_limit

- qcom,ctrl-delay-us: delay in activation of led

- qcom,dig-mod-gen-en: digital module generator

- qcom,cs-out-en: current sink output enable

- qcom,op-fdbck: selection of output as feedback for the boost, 00 = automatic selection, 01 = select LED1 output, 02 = select LED2 output, 03 = select LED3 output

- qcom,cp-select: high pole capacitance

- linux,default-trigger: trigger the led from external modules such as display

- qcom,default-state:  default state of the led, should be "on" or "off"

Flash is used primarily as a camera or video flash.

Optional properties for flash:

- qcom,headroom: headroom to use. Values should be 0, 1, 2, 3 for 250mV, 300mV, 400mV and 500mV

- qcom,duration: duration of the flash and torch, 10ms - 1280ms for flash and 2s - 33s for torch

- qcom,clamp-curr: current to clamp at, mA

- qcom,startup-dly: delay before flashing after flash executed. Values should 0, 1, 2, 3 for 10us, 32us, 64us, and 128us

- qcom,saftey-timer: include for safety timer use, otherwise watchdog timer will be used

- linux,default-trigger: trigger the led from external modules such as display

- qcom,default-state:  default state of the led, should be "on" or "off"

- qcom,torch-enable: set flash led to torch mode functionality and triggers software workaround for torch if hardware does not support

- qcom,sw_vreg_ok: Specify if software strobe is used to inform the readiness of flash module to fire the flash LED when there is no smbb support

- qcom,no-smbb-support: Specify if smbb boost is not required and there is a single regulator for both flash and torch.

- flash-boost-supply: SMBB regulator for LED flash mode

- torch-boost-supply: SMBB regulator for LED torch mode

- flash-wa-supply: SMBB regulator for flash workarounds.

RGB Led is a tri-colored led, Red, Blue & Green.

Required properties for RGB led:

- qcom,mode: mode the led should operate in, options "pwm" and "lpg". "manual" mode is not supported for RGB led.

Required properties for PWM mode only:

- pwms: Use the phandle of pwm device

- qcom,pwm-us: time the pwm device will modulate at (us)

Required properties for LPG mode only:

- pwms: Use the phandle of pwm device

- qcom,pwm-us: time the pwm device will modulate at (us)

- qcom,duty-pcts: array of values for duty cycle to go through

- qcom,start-idx: starting point duty-pcts array

Optional properties for LPG mode only:

- qcom,pause-lo: pause at low end of cycle

- qcom,pause-hi: pause at high end of cycle

- qcom,ramp-step-ms: step between each cycle (ms)

- qcom,lut-flags: flags to be used in lut configuration

Optional properties for RGB led:

- linux,default-trigger: trigger the led from external modules such as display

- qcom,default-state:  default state of the led, should be "on" or "off"

- qcom,turn-off-delay-ms: delay in millisecond for turning off the led when its default-state is "on". Value is being ignored in case default-state is "off".

- qcom,use-blink: Use blink sysfs entry for switching into lpg mode.  For optimal use, set default mode to pwm.  All required lpg parameters must be supplied.

MPP LED is an LED controlled through a Multi Purpose Pin.

Optional properties for MPP LED:

- linux,default-trigger: trigger the led from external modules such as display

- qcom,default-state: default state of the led, should be "on" or "off"

- qcom,source-sel: select power source, default 1 (enabled)

- qcom,mode-ctrl: select operation mode, default 0x60 = Mode Sink

- qcom,mode: mode the led should operate in, options "pwm", "lpg" and "manual"

- qcom,vin-ctrl: select input source, supported values are 0 to 3

- qcom,use-blink: Use blink sysfs entry for switching into lpg mode.  For optimal use, set default mode to pwm.  All required lpg parameters must be supplied.

- qcom,min-brightness - Lowest possible brightness supported on this LED other than 0.

- qcom,current-setting: default current value for wled used as button backlight in mA

- mpp-power-supply: regulator support for MPP LED

- qcom,mpp-power-max-voltage - maximum voltage for MPP LED regulator. This should not be specified when no regulator is in use.

- qcom,mpp-power-min-voltage - minimum voltage for MPP LED regulator. This should not be specified when no regulator is in use.

Required properties for PWM mode only:

- pwms: Use the phandle of pwm device

- qcom,pwm-us: time the pwm device will modulate at (us)

Required properties for LPG mode only:

- pwms: Use the phandle of pwm device

- qcom,pwm-us: time the pwm device will modulate at (us)

- qcom,duty-pcts: array of values for duty cycle to go through

- qcom,start-idx: starting point duty-pcts array

Optional properties for LPG mode only:

- qcom,pause-lo: pause at low end of cycle

- qcom,pause-hi: pause at high end of cycle

- qcom,ramp-step-ms: step between each cycle (ms)

- qcom,lut-flags: flags to be used in lut configuration

Keypad backlight is a backlight source for buttons. It supports four rows

and the required rows are enabled by specifying values in the properties.

Required properties for keypad backlight:

- qcom,mode: mode the led should operate in, options "pwm" and "lpg". "manual" mode is not supported for keypad backlight.

- qcom,row-id: specify the id of the row. Supported values are 0 to 3.

Optional properties for keypad backlight:

- qcom,row-src-vbst: select source for rows. Specify for vbst and ignore it

			for vph_pwr.

- qcom,row-src-en: specify to enable row source

- qcom,always-on: specify if the module has to be always on

- qcom,use-blink: Use blink sysfs entry for switching into lpg mode.  For optimal use, set default mode to pwm.  All required lpg parameters must be supplied.

Required properties for PWM mode only:

- pwms: Use the phandle of pwm device

- qcom,pwm-us: time the pwm device will modulate at (us)

Required properties for LPG mode only:

- pwms: Use the phandle of pwm device

- qcom,pwm-us: time the pwm device will modulate at (us)

- qcom,duty-pcts: array of values for duty cycle to go through

- qcom,start-idx: starting point duty-pcts array

Optional properties for LPG mode only:

- qcom,pause-lo: pause at low end of cycle

- qcom,pause-hi: pause at high end of cycle

- qcom,ramp-step-ms: step between each cycle (ms)

- qcom,lut-flags: flags to be used in lut configuration

GPIO LED is an LED controlled through a PMIC GPIO.

Optional properties for GPIO LED:

- linux,default-trigger: trigger the led from external modules such as charging

- qcom,default-state: default state of the led, should be "on" or "off"

- qcom,turn-off-delay-ms: delay in millisecond for turning off the led when its default-state is "on". Value is being ignored in case default-state is "off".

- qcom,source-sel: select power source, default 1 (enabled)

- qcom,mode-ctrl: select operation mode, default 0x60 = Mode Sink

- qcom,vin-ctrl: select input source, supported values are 0 to 7

Example:

	qcom,leds@a100 {

		status = "okay";

		qcom,led_mpp_2 {

			label = "mpp";

			linux,name = "button-backlight";

			linux,default-trigger = "hr-trigger";

			qcom,default-state = "off";

			qcom,current-setting = <20>;

			qcom,max-current = <40>;

			qcom,id = <6>;

			qcom,source-sel = <1>;

			qcom,mode-ctrl = <0x61>;

			qcom,mode = "manual";

		};

	};

	qcom,leds@a200 {

		status = "okay";

		qcom,led_mpp_3 {

			label = "mpp";

			linux,name = "wled-backlight";

			linux-default-trigger = "none";

			qcom,default-state = "on";

			qcom,max-current = <40>;

			qcom,id = <6>;

			qcom,source-sel = <1>;

			qcom,mode-ctrl = <0x10>;

			qcom,vin-ctrl = <0x03>;

			qcom,min-brightness = <20>;

		};

	};

	qcom,leds@a300 {

		status = "okay";

		qcom,led_mpp_pwm {

			label = "mpp";

			linux,name = "green";

			linux,default-trigger = "none";

			qcom,default-state = "off";

			qcom,max-current = <40>;

			qcom,current-setting = <5>;

			qcom,id = <6>;

			qcom,mode = "pwm";

			qcom,source-sel = <8>;

			qcom,mode-ctrl = <0x60>;

			pwms = <&pm8941_pwm_1 0 0>;

			qcom,pwm-us = <1000>;

		};

	};

	qcom,leds@d000 {

		status = "okay";

		qcom,rgb_pwm {

			label = "rgb";

			linux,name = "led:rgb_red";

			qcom,mode = "pwm";

			qcom,pwm-us = <1000>;

			pwms = <&pm8941_pwm_7 0 0>;

			qcom,max-current = <12>;

			qcom,default-state = "off";

			qcom,id = <3>;

			linux,default-trigger =

				"battery-charging";

		};

		qcom,rgb_lpg {

			label = "rgb";

			linux,name = "led:rgb_green";

			qcom,mode = "lpg";

			pwms = <&pm8941_pwm_6 0 0>;

			qcom,pwm-us = <1000>;

			qcom,duty-ms = <20>;

			qcom,start-idx = <1>;

			qcom,idx-len = <10>;

			qcom,duty-pcts = [00 19 32 4B 64

					 64 4B 32 19 00];

			qcom,max-current = <12>;

			qcom,default-state = "off";

			qcom,id = <3>;

			linux,default-trigger =

				"battery-charging";

		};

		qcom,rgb_blink {

			label = "rgb";

			linux,name = "led:rgb_blue";

			qcom,mode = "pwm";

			pwms = <&pm8941_pwm_5 0 0>;

			qcom,start-idx = <1>;

			qcom,idx-len = <10>;

			qcom,duty-pcts = [00 19 32 4B 64

					 64 4B 32 19 00];

			qcom,lut-flags = <3>;

			qcom,pause-lo = <0>;

			qcom,pause-hi = <0>;

			qcom,ramp-step-ms = <255>;

			qcom,max-current = <12>;

			qcom,default-state = "on";

			qcom,turn-off-delay-ms = <500>;

			qcom,id = <5>;

			linux,default-trigger = "none";

			qcom,pwm-us = <1000>;

			qcom,use-blink;

		};

	};

	qcom,leds@d300 {

			compatible = "qcom,leds-qpnp";

			status = "okay";

			flash-boost-supply = <&pm8941_chg_boost>;

			torch-boost-supply = <&pm8941_boost>;

			qcom,flash_0 {

				qcom,max-current = <1000>;

				qcom,default-state = "off";

				qcom,headroom = <0>;

				qcom,duration = <200>;

				qcom,clamp-curr = <200>;

				qcom,startup-dly = <1>;

				qcom,safety-timer;

				label = "flash";

				linux,default-trigger =

					"flash0_trigger";

				linux,name = "led:flash_0";

				qcom,current = <625>;

				qcom,id = <1>;

				qcom,no-torch-module;

			};

	};

	qcom,leds@d800 {

			compatible = "qcom,leds-qpnp";

			status = "okay";

			qcom,wled_0 {

				linux,default-trigger = "bkl-trigger"

				label = "wled";

				qcom,cs-out-en;

				qcom,op-fdbck = <1>;

				qcom,default-state "off";

				qcom,max-current = <25>;

				qcom,ctrl-delay-us = <0>;

				qcom,boost-curr-lim = <3>;

				qcom,cp-sel = <0>;

				qcom,switch-freq = <2>;

				qcom,ovp-val = <2>;

				qcom,num-strings = <1>;

				qcom,id = <0>;

				linux,name = "led:wled_backlight";

			};

	};

	qcom,leds@e200 {

		status = "okay";

		qcom,kpdbl1 {

			label = "kpdbl";

			linux,name = "kpdbl-pwm-1";

			qcom,mode = <0>;

			pwms = <&pm8941_pwm_9 0 0>;

			qcom,pwm-us = <1000>;

			qcom,id = <7>;

			qcom,max-current = <20>;

			qcom,row-id = <0>;

			qcom,row-src-en;

			qcom,always-on;

		};

		qcom,kpdbl2 {

			label = "kpdbl";

			linux,name = "kpdbl-lut-2";

			qcom,mode = <1>;

			pwms = <&pm8941_pwm_10 0 0>;

			qcom,pwm-us = <1000>;

			qcom,start-idx = <1>;

			qcom,duty-pcts = [00 00 00 00 64

					64 00 00 00 00];

			qcom,id = <7>;

			qcom,max-current = <20>;

			qcom,row-id = <1>;

			qcom,row-src-en;

		};

	};

	qcom,leds@c900 {

		compatible = "qcom,leds-qpnp";

		reg = <0xc900 0x100>;

		status = "okay";

		qcom,led_gpio_10 {

			label = "gpio";

			linux,name = "led:notification";

			qcom,max-current = <40>;

			qcom,id = <8>;

			linux,default-trigger = "notification";

			qcom,default-state = "on";

			qcom,turn-off-delay-ms = <1000>;

			qcom,source-sel = <1>;

			qcom,mode-ctrl = <0x10>;

			qcom,vin-ctrl = <0x02>;

		};

	};

Qualcomm Technologies, Inc. MSM8917 TLMM block

This binding describes the Top Level Mode Multiplexer block found in the

MSM8917 platform.

- compatible:

	Usage: required

	Value type: <string>

	Definition: must be "qcom,msm8917-pinctrl"

- reg:

	Usage: required

	Value type: <prop-encoded-array>

	Definition: the base address and size of the TLMM register space

		    provided as "pinctrl_regs".

- reg-names:

	Usage: required

	Value type: <prop-encoded-array>

	Definition: Provides labels for the reg property.

- interrupts:

	Usage: required

	Value type: <prop-encoded-array>

	Definition: should specify the TLMM summary IRQ.

- interrupt-controller:

	Usage: required

	Value type: <none>

	Definition: identifies this node as an interrupt controller

- #interrupt-cells:

	Usage: required

	Value type: <u32>

	Definition: must be 2. Specifying the pin number and flags, as defined

		    in <dt-bindings/interrupt-controller/irq.h>

- gpio-controller:

	Usage: required

	Value type: <none>

	Definition: identifies this node as a gpio controller

- #gpio-cells:

	Usage: required

	Value type: <u32>

	Definition: must be 2. Specifying the pin number and flags, as defined

		    in <dt-bindings/gpio/gpio.h>

Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for

a general description of GPIO and interrupt bindings.

Please refer to pinctrl-bindings.txt in this directory for details of the

common pinctrl bindings used by client devices, including the meaning of the

phrase "pin configuration node".

The pin configuration nodes act as a container for an arbitrary number of

subnodes. Each of these subnodes represents some desired configuration for a

pin, a group, or a list of pins or groups. This configuration can include the

mux function to select on those pin(s)/group(s), and various pin configuration

parameters, such as pull-up, drive strength, etc.

PIN CONFIGURATION NODES:

The name of each subnode is not important; all subnodes should be enumerated

and processed purely based on their content.

Each subnode only affects those parameters that are explicitly listed. In

other words, a subnode that lists a mux function but no pin configuration

parameters implies no information about any pin configuration parameters.

Similarly, a pin subnode that describes a pullup parameter implies no

information about e.g. the mux function.

The following generic properties as defined in pinctrl-bindings.txt are valid

to specify in a pin configuration subnode:

- pins:

	Usage: required

	Value type: <string-array>

	Definition: List of gpio pins affected by the properties specified in

		    this subnode.

		    Valid pins are:

		    gpio0-gpio133,

		    sdc1_clk,

		    sdc1_cmd,

		    sdc1_data,

		    sdc1_rclk,

		    sdc2_clk,

		    sdc2_cmd,

		    sdc2_data,

		    qdsd_clk,

		    qdsd_cmd,

		    qdsd_data0,

		    qdsd_data1,

		    qdsd_data2,

		    qdsd_data3,

- function:

	Usage: required

	Value type: <string>

	Definition: Specify the alternative function to be configured for the

		    specified pins. Functions are only valid for gpio pins.

		    Valid values are:

        qdss_tracedata_b, blsp_uart1, gpio, blsp_spi1, adsp_ext, blsp_i2c1, prng_rosc,

        qdss_cti_trig_out_b0, blsp_spi2, blsp_uart2, blsp_uart3, pbs0, pbs1,

        pwr_modem_enabled_b, blsp_i2c3, gcc_gp2_clk_b, ldo_update,

        atest_combodac_to_gpio_native, ldo_en, blsp_i2c2, gcc_gp1_clk_b, pbs2,

        atest_gpsadc_dtest0_native, blsp_spi3, gcc_gp3_clk_b, blsp_spi4, blsp_uart4,

        sec_mi2s, pwr_nav_enabled_b, codec_mad, pwr_crypto_enabled_b, blsp_i2c4,

        blsp_spi5, blsp_uart5, qdss_traceclk_a, atest_bbrx1, m_voc,

        qdss_cti_trig_in_a0, qdss_cti_trig_in_b0, blsp_i2c6, qdss_traceclk_b,

        atest_wlan0, atest_wlan1, atest_bbrx0, blsp_i2c5, qdss_tracectl_a,

        atest_gpsadc_dtest1_native, qdss_tracedata_a, blsp_spi6, blsp_uart6,

        qdss_tracectl_b, mdp_vsync, pri_mi2s_mclk_a, sec_mi2s_mclk_a, cam_mclk,

        cci_i2c, pwr_modem_enabled_a, cci_timer0, cci_timer1, cam1_standby,

        pwr_nav_enabled_a, cam1_rst, pwr_crypto_enabled_a, forced_usb,

        qdss_cti_trig_out_b1, cam2_rst, webcam_standby, cci_async, webcam_rst,

        ov_ldo, sd_write, accel_int, gcc_gp1_clk_a, alsp_int, gcc_gp2_clk_a,

        mag_int, gcc_gp3_clk_a, blsp6_spi, fp_int, qdss_cti_trig_in_b1, uim_batt,

        cam2_standby, uim1_data, uim1_clk, uim1_reset, uim1_present, uim2_data,

        uim2_clk, uim2_reset, uim2_present, sensor_rst, mipi_dsi0, smb_int,

        cam0_ldo, us_euro, atest_char3, dbg_out, bimc_dte0, ts_resout, ts_sample,

        sec_mi2s_mclk_b, pri_mi2s, sdcard_det, atest_char1, ebi_cdc, audio_reset,

        atest_char0, audio_ref, cdc_pdm0, pri_mi2s_mclk_b, lpass_slimbus,

        lpass_slimbus0, lpass_slimbus1, codec_int1, codec_int2, wcss_bt,

        atest_char2, ebi_ch0, wcss_wlan2, wcss_wlan1, wcss_wlan0, wcss_wlan,

        wcss_fm, ext_lpass, cri_trng, cri_trng1, cri_trng0, blsp_spi7, blsp_uart7,

        pri_mi2s_ws, blsp_i2c7, gcc_tlmm, dmic0_clk, dmic0_data, key_volp,

        qdss_cti_trig_in_a1, us_emitter, wsa_irq, wsa_io, wsa_reset, blsp_spi8,

        blsp_uart8, blsp_i2c8, gcc_plltest, nav_pps_in_a, pa_indicator, modem_tsync,

        nav_tsync, nav_pps_in_b, nav_pps, gsm0_tx, atest_char, atest_tsens,

        bimc_dte1, ssbi_wtr1, fp_gpio, coex_uart, key_snapshot, key_focus, nfc_pwr,

        blsp8_spi, qdss_cti_trig_out_a0, qdss_cti_trig_out_a1

- bias-disable:

	Usage: optional

	Value type: <none>

	Definition: The specified pins should be configued as no pull.

- bias-pull-down:

	Usage: optional

	Value type: <none>

	Definition: The specified pins should be configued as pull down.

- bias-pull-up:

	Usage: optional

	Value type: <none>

	Definition: The specified pins should be configued as pull up.

- output-high:

	Usage: optional

	Value type: <none>

	Definition: The specified pins are configured in output mode, driven

		    high.

		    Not valid for sdc pins.

- output-low:

	Usage: optional

	Value type: <none>

	Definition: The specified pins are configured in output mode, driven

		    low.

		    Not valid for sdc pins.

- drive-strength:

	Usage: optional

	Value type: <u32>

	Definition: Selects the drive strength for the specified pins, in mA.

		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16

Example:

	tlmm: pinctrl@1000000 {

		compatible = "qcom,msm8917-pinctrl";

		reg = <0x1000000 0x300000>;

		reg-names = "pinctrl_regs";

		interrupts = <0 208 0>;

		gpio-controller;

		#gpio-cells = <2>;

		interrupt-controller;

		#interrupt-cells = <2>;

		pmx-uartconsole {

			uart_console_active: uart_console_active {

				mux {

					pins = "gpio4", "gpio5";

					function = "blsp_uart2";

				};

				config {

					pins = "gpio4", "gpio5";

					drive-strength = <2>;

					bias-disable;

				};

			};

			uart_console_sleep: uart_console_sleep {

				mux {

					pins = "gpio4", "gpio5";

					function = "blsp_uart2";

				};

				config {

					pins = "gpio4", "gpio5";

					drive-strength = <2>;

					bias-pull-down;

				};

			};

		};

	};