hwmon: Add LTC2990 sensor driver (df922703) · Commits · e / devices / android_kernel_oneplus_sm7250

Documentation/hwmon/ltc2990

0 → 100644

+43 −0

Original line number	Diff line number	Diff line
		Kernel driver ltc2990
		=====================

		Supported chips:
		* Linear Technology LTC2990
		Prefix: 'ltc2990'
		Addresses scanned: -
		Datasheet: http://www.linear.com/product/ltc2990

		Author: Mike Looijmans <mike.looijmans@topic.nl>


		Description
		-----------

		LTC2990 is a Quad I2C Voltage, Current and Temperature Monitor.
		The chip's inputs can measure 4 voltages, or two inputs together (1+2 and 3+4)
		can be combined to measure a differential voltage, which is typically used to
		measure current through a series resistor, or a temperature.

		This driver currently uses the 2x differential mode only. In order to support
		other modes, the driver will need to be expanded.


		Usage Notes
		-----------

		This driver does not probe for PMBus devices. You will have to instantiate
		devices explicitly.


		Sysfs attributes
		----------------

		The "curr*_input" measurements actually report the voltage drop across the
		input pins in microvolts. This is equivalent to the current through a 1mOhm
		sense resistor. Divide the reported value by the actual sense resistor value
		in mOhm to get the actual value.

		in0_input Voltage at Vcc pin in millivolt (range 2.5V to 5V)
		temp1_input Internal chip temperature in millidegrees Celcius
		curr1_input Current in mA across v1-v2 assuming a 1mOhm sense resistor.
		curr2_input Current in mA across v3-v4 assuming a 1mOhm sense resistor.

drivers/hwmon/Kconfig

+14 −0

Original line number	Diff line number	Diff line
		@@ -685,6 +685,20 @@ config SENSORS_LTC2945
		This driver can also be built as a module. If so, the module will
		be called ltc2945.

		config SENSORS_LTC2990
		tristate "Linear Technology LTC2990 (current monitoring mode only)"
		depends on I2C
		help
		If you say yes here you get support for Linear Technology LTC2990
		I2C System Monitor. The LTC2990 supports a combination of voltage,
		current and temperature monitoring, but in addition to the Vcc supply
		voltage and chip temperature, this driver currently only supports
		reading two currents by measuring two differential voltages across
		series resistors.

		This driver can also be built as a module. If so, the module will
		be called ltc2990.

		config SENSORS_LTC4151
		tristate "Linear Technology LTC4151"
		depends on I2C

drivers/hwmon/Makefile

+1 −0

Original line number	Diff line number	Diff line
		@@ -100,6 +100,7 @@ obj-$(CONFIG_SENSORS_LM95234) += lm95234.o
		obj-$(CONFIG_SENSORS_LM95241) += lm95241.o
		obj-$(CONFIG_SENSORS_LM95245) += lm95245.o
		obj-$(CONFIG_SENSORS_LTC2945) += ltc2945.o
		obj-$(CONFIG_SENSORS_LTC2990) += ltc2990.o
		obj-$(CONFIG_SENSORS_LTC4151) += ltc4151.o
		obj-$(CONFIG_SENSORS_LTC4215) += ltc4215.o
		obj-$(CONFIG_SENSORS_LTC4222) += ltc4222.o

drivers/hwmon/ltc2990.c

0 → 100644

+161 −0

Original line number	Diff line number	Diff line
		/*
		* Driver for Linear Technology LTC2990 power monitor
		*
		* Copyright (C) 2014 Topic Embedded Products
		* Author: Mike Looijmans <mike.looijmans@topic.nl>
		*
		* License: GPLv2
		*
		* This driver assumes the chip is wired as a dual current monitor, and
		* reports the voltage drop across two series resistors. It also reports
		* the chip's internal temperature and Vcc power supply voltage.
		*/

		#include <linux/err.h>
		#include <linux/hwmon.h>
		#include <linux/hwmon-sysfs.h>
		#include <linux/i2c.h>
		#include <linux/kernel.h>
		#include <linux/module.h>

		#define LTC2990_STATUS 0x00
		#define LTC2990_CONTROL 0x01
		#define LTC2990_TRIGGER 0x02
		#define LTC2990_TINT_MSB 0x04
		#define LTC2990_V1_MSB 0x06
		#define LTC2990_V2_MSB 0x08
		#define LTC2990_V3_MSB 0x0A
		#define LTC2990_V4_MSB 0x0C
		#define LTC2990_VCC_MSB 0x0E

		#define LTC2990_CONTROL_KELVIN BIT(7)
		#define LTC2990_CONTROL_SINGLE BIT(6)
		#define LTC2990_CONTROL_MEASURE_ALL (0x3 << 3)
		#define LTC2990_CONTROL_MODE_CURRENT 0x06
		#define LTC2990_CONTROL_MODE_VOLTAGE 0x07

		/* convert raw register value to sign-extended integer in 16-bit range */
		static int ltc2990_voltage_to_int(int raw)
		{
		if (raw & BIT(14))
		return -(0x4000 - (raw & 0x3FFF)) << 2;
		else
		return (raw & 0x3FFF) << 2;
		}

		/* Return the converted value from the given register in uV or mC */
		static int ltc2990_get_value(struct i2c_client i2c, u8 reg, int result)
		{
		int val;

		val = i2c_smbus_read_word_swapped(i2c, reg);
		if (unlikely(val < 0))
		return val;

		switch (reg) {
		case LTC2990_TINT_MSB:
		/* internal temp, 0.0625 degrees/LSB, 13-bit */
		val = (val & 0x1FFF) << 3;
		result = (val 1000) >> 7;
		break;
		case LTC2990_V1_MSB:
		case LTC2990_V3_MSB:
		/* Vx-Vy, 19.42uV/LSB. Depends on mode. */
		result = ltc2990_voltage_to_int(val) 1942 / (4 * 100);
		break;
		case LTC2990_VCC_MSB:
		/* Vcc, 305.18μV/LSB, 2.5V offset */
		result = (ltc2990_voltage_to_int(val) 30518 /
		(4 * 100 * 1000)) + 2500;
		break;
		default:
		return -EINVAL; /* won't happen, keep compiler happy */
		}

		return 0;
		}

		static ssize_t ltc2990_show_value(struct device *dev,
		struct device_attribute da, char buf)
		{
		struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
		int value;
		int ret;

		ret = ltc2990_get_value(dev_get_drvdata(dev), attr->index, &value);
		if (unlikely(ret < 0))
		return ret;

		return snprintf(buf, PAGE_SIZE, "%d\n", value);
		}

		static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, ltc2990_show_value, NULL,
		LTC2990_TINT_MSB);
		static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, ltc2990_show_value, NULL,
		LTC2990_V1_MSB);
		static SENSOR_DEVICE_ATTR(curr2_input, S_IRUGO, ltc2990_show_value, NULL,
		LTC2990_V3_MSB);
		static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, ltc2990_show_value, NULL,
		LTC2990_VCC_MSB);

		static struct attribute *ltc2990_attrs[] = {
		&sensor_dev_attr_temp1_input.dev_attr.attr,
		&sensor_dev_attr_curr1_input.dev_attr.attr,
		&sensor_dev_attr_curr2_input.dev_attr.attr,
		&sensor_dev_attr_in0_input.dev_attr.attr,
		NULL,
		};
		ATTRIBUTE_GROUPS(ltc2990);

		static int ltc2990_i2c_probe(struct i2c_client *i2c,
		const struct i2c_device_id *id)
		{
		int ret;
		struct device *hwmon_dev;

		if (!i2c_check_functionality(i2c->adapter, I2C_FUNC_SMBUS_BYTE_DATA \|
		I2C_FUNC_SMBUS_WORD_DATA))
		return -ENODEV;

		/* Setup continuous mode, current monitor */
		ret = i2c_smbus_write_byte_data(i2c, LTC2990_CONTROL,
		LTC2990_CONTROL_MEASURE_ALL \|
		LTC2990_CONTROL_MODE_CURRENT);
		if (ret < 0) {
		dev_err(&i2c->dev, "Error: Failed to set control mode.\n");
		return ret;
		}
		/* Trigger once to start continuous conversion */
		ret = i2c_smbus_write_byte_data(i2c, LTC2990_TRIGGER, 1);
		if (ret < 0) {
		dev_err(&i2c->dev, "Error: Failed to start acquisition.\n");
		return ret;
		}

		hwmon_dev = devm_hwmon_device_register_with_groups(&i2c->dev,
		i2c->name,
		i2c,
		ltc2990_groups);

		return PTR_ERR_OR_ZERO(hwmon_dev);
		}

		static const struct i2c_device_id ltc2990_i2c_id[] = {
		{ "ltc2990", 0 },
		{}
		};
		MODULE_DEVICE_TABLE(i2c, ltc2990_i2c_id);

		static struct i2c_driver ltc2990_i2c_driver = {
		.driver = {
		.name = "ltc2990",
		},
		.probe = ltc2990_i2c_probe,
		.id_table = ltc2990_i2c_id,
		};

		module_i2c_driver(ltc2990_i2c_driver);

		MODULE_DESCRIPTION("LTC2990 Sensor Driver");
		MODULE_AUTHOR("Topic Embedded Products");
		MODULE_LICENSE("GPL v2");