[POWERPC] 8xx: Add mpc885ads support and common mpc8xx files

/*

 * MPC885 ADS Device Tree Source

 *

 * Copyright 2006 MontaVista Software, Inc.

 *

 * This program is free software; you can redistribute  it and/or modify it

 * under  the terms of  the GNU General  Public License as published by the

 * Free Software Foundation;  either version 2 of the  License, or (at your

 * option) any later version.

 */

/ {

	model = "MPC885ADS";

	compatible = "mpc8xx";

	#address-cells = <1>;

	#size-cells = <1>;

	linux,phandle = <100>;

	cpus {

		#cpus = <1>;

		#address-cells = <1>;

		#size-cells = <0>;

		linux,phandle = <200>;

		PowerPC,885@0 {

			device_type = "cpu";

			reg = <0>;

			d-cache-line-size = <20>;	// 32 bytes

			i-cache-line-size = <20>;	// 32 bytes

			d-cache-size = <2000>;		// L1, 8K

			i-cache-size = <2000>;		// L1, 8K

			timebase-frequency = <0>;

			bus-frequency = <0>;

			clock-frequency = <0>;

			32-bit;

			interrupts = <f 2>;	// decrementer interrupt

			interrupt-parent = <ff000000>;

			linux,phandle = <201>;

			linux,boot-cpu;

		};

	};

	memory {

		device_type = "memory";

		linux,phandle = <300>;

		reg = <00000000 800000>;

	};

	soc885@ff000000 {

		#address-cells = <1>;

		#size-cells = <1>;

		#interrupt-cells = <2>;

		device_type = "soc";

		ranges = <0 ff000000 00100000>;

		reg = <ff000000 00000200>;

		bus-frequency = <0>;

		mdio@e80 {

			device_type = "mdio";

			compatible = "fs_enet";

			reg = <e80 8>;

			linux,phandle = <e80>;

			#address-cells = <1>;

			#size-cells = <0>;

			ethernet-phy@0 {

				linux,phandle = <e8000>;

				reg = <0>;

				device_type = "ethernet-phy";

			};

			ethernet-phy@1 {

				linux,phandle = <e8001>;

				reg = <1>;

				device_type = "ethernet-phy";

			};

			ethernet-phy@2 {

				linux,phandle = <e8002>;

				reg = <2>;

				device_type = "ethernet-phy";

			};

		};

		fec@e00 {

			device_type = "network";

			compatible = "fs_enet";

			model = "FEC";

			device-id = <1>;

			reg = <e00 188>;

			mac-address = [ 00 00 0C 00 01 FD ];

			interrupts = <3 1>;

			interrupt-parent = <ff000000>;

			phy-handle = <e8000>;

		};

		fec@1e00 {

			device_type = "network";

			compatible = "fs_enet";

			model = "FEC";

			device-id = <2>;

			reg = <1e00 188>;

			mac-address = [ 00 00 0C 00 02 FD ];

			interrupts = <7 1>;

			interrupt-parent = <ff000000>;

			phy-handle = <e8001>;

		};

		pic@ff000000 {

			linux,phandle = <ff000000>;

			interrupt-controller;

			#address-cells = <0>;

			#interrupt-cells = <2>;

			reg = <0 24>;

			built-in;

			device_type = "mpc8xx-pic";

			compatible = "CPM";

		};

		cpm@ff000000 {

			linux,phandle = <ff000000>;

			#address-cells = <1>;

			#size-cells = <1>;

			#interrupt-cells = <2>;

			device_type = "cpm";

			model = "CPM";

			ranges = <0 0 4000>;

			reg = <860 f0>;

			command-proc = <9c0>;

			brg-frequency = <0>;

			interrupts = <0 2>;	// cpm error interrupt

			interrupt-parent = <930>;

			pic@930 {

				linux,phandle = <930>;

				interrupt-controller;

				#address-cells = <0>;

				#interrupt-cells = <2>;

				interrupts = <5 2 0 2>;

				interrupt-parent = <ff000000>;

				reg = <930 20>;

				built-in;

				device_type = "cpm-pic";

				compatible = "CPM";

			};

			smc@a80 {

				device_type = "serial";

				compatible = "cpm_uart";

				model = "SMC";

				device-id = <1>;

				reg = <a80 10 3e80 40>;

				clock-setup = <00ffffff 0>;

				rx-clock = <1>;

				tx-clock = <1>;

				current-speed = <0>;

				interrupts = <4 3>;

				interrupt-parent = <930>;

			};

			smc@a90 {

				device_type = "serial";

				compatible = "cpm_uart";

				model = "SMC";

				device-id = <2>;

				reg = <a90 20 3f80 40>;

				clock-setup = <ff00ffff 90000>;

				rx-clock = <2>;

				tx-clock = <2>;

				current-speed = <0>;

				interrupts = <3 3>;

				interrupt-parent = <930>;

			};

			scc@a40 {

				device_type = "network";

				compatible = "fs_enet";

				model = "SCC";

				device-id = <3>;

				reg = <a40 18 3e00 80>;

				mac-address = [ 00 00 0C 00 03 FD ];

				interrupts = <1c 3>;

				interrupt-parent = <930>;

				phy-handle = <e8002>;

			};

		};

	};

};

#

# Automatically generated make config: don't edit

# Linux kernel version: 2.6.19-rc4

# Fri Nov 10 21:30:40 2006

#

# CONFIG_PPC64 is not set

CONFIG_PPC32=y

CONFIG_PPC_MERGE=y

CONFIG_MMU=y

CONFIG_GENERIC_HARDIRQS=y

CONFIG_IRQ_PER_CPU=y

CONFIG_RWSEM_XCHGADD_ALGORITHM=y

CONFIG_GENERIC_HWEIGHT=y

CONFIG_GENERIC_CALIBRATE_DELAY=y

CONFIG_GENERIC_FIND_NEXT_BIT=y

CONFIG_PPC=y

CONFIG_EARLY_PRINTK=y

CONFIG_GENERIC_NVRAM=y

CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y

CONFIG_ARCH_MAY_HAVE_PC_FDC=y

CONFIG_PPC_OF=y

# CONFIG_PPC_UDBG_16550 is not set

# CONFIG_GENERIC_TBSYNC is not set

CONFIG_AUDIT_ARCH=y

# CONFIG_DEFAULT_UIMAGE is not set

#

# Processor support

#

# CONFIG_CLASSIC32 is not set

# CONFIG_PPC_52xx is not set

# CONFIG_PPC_82xx is not set

# CONFIG_PPC_83xx is not set

# CONFIG_PPC_85xx is not set

# CONFIG_PPC_86xx is not set

CONFIG_PPC_8xx=y

# CONFIG_40x is not set

# CONFIG_44x is not set

# CONFIG_E200 is not set

CONFIG_8xx=y

CONFIG_NOT_COHERENT_CACHE=y

CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#

# Code maturity level options

#

CONFIG_EXPERIMENTAL=y

CONFIG_BROKEN_ON_SMP=y

CONFIG_INIT_ENV_ARG_LIMIT=32

#

# General setup

#

CONFIG_LOCALVERSION=""

CONFIG_LOCALVERSION_AUTO=y

# CONFIG_SWAP is not set

CONFIG_SYSVIPC=y

# CONFIG_IPC_NS is not set

# CONFIG_POSIX_MQUEUE is not set

# CONFIG_BSD_PROCESS_ACCT is not set

# CONFIG_TASKSTATS is not set

# CONFIG_UTS_NS is not set

# CONFIG_AUDIT is not set

# CONFIG_IKCONFIG is not set

# CONFIG_RELAY is not set

CONFIG_INITRAMFS_SOURCE=""

# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set

CONFIG_SYSCTL=y

CONFIG_EMBEDDED=y

# CONFIG_SYSCTL_SYSCALL is not set

CONFIG_KALLSYMS=y

# CONFIG_KALLSYMS_EXTRA_PASS is not set

# CONFIG_HOTPLUG is not set

CONFIG_PRINTK=y

# CONFIG_BUG is not set

CONFIG_ELF_CORE=y

# CONFIG_BASE_FULL is not set

CONFIG_FUTEX=y

# CONFIG_EPOLL is not set

CONFIG_SHMEM=y

CONFIG_SLAB=y

# CONFIG_VM_EVENT_COUNTERS is not set

CONFIG_RT_MUTEXES=y

# CONFIG_TINY_SHMEM is not set

CONFIG_BASE_SMALL=1

# CONFIG_SLOB is not set

#

# Loadable module support

#

# CONFIG_MODULES is not set

#

# Block layer

#

CONFIG_BLOCK=y

# CONFIG_LBD is not set

# CONFIG_BLK_DEV_IO_TRACE is not set

# CONFIG_LSF is not set

#

# IO Schedulers

#

CONFIG_IOSCHED_NOOP=y

CONFIG_IOSCHED_AS=y

CONFIG_IOSCHED_DEADLINE=y

CONFIG_IOSCHED_CFQ=y

CONFIG_DEFAULT_AS=y

# CONFIG_DEFAULT_DEADLINE is not set

# CONFIG_DEFAULT_CFQ is not set

# CONFIG_DEFAULT_NOOP is not set

CONFIG_DEFAULT_IOSCHED="anticipatory"

# CONFIG_WANT_EARLY_SERIAL is not set

CONFIG_EMBEDDEDBOOT=y

# CONFIG_MPIC is not set

#

# Platform support

#

CONFIG_CPM1=y

# CONFIG_MPC8XXFADS is not set

# CONFIG_MPC86XADS is not set

CONFIG_MPC885ADS=y

#

# MPC8xx CPM Options

#

#

# Generic MPC8xx Options

#

CONFIG_8xx_COPYBACK=y

# CONFIG_8xx_CPU6 is not set

CONFIG_NO_UCODE_PATCH=y

# CONFIG_USB_SOF_UCODE_PATCH is not set

# CONFIG_I2C_SPI_UCODE_PATCH is not set

# CONFIG_I2C_SPI_SMC1_UCODE_PATCH is not set

#

# Kernel options

#

# CONFIG_HIGHMEM is not set

# CONFIG_HZ_100 is not set

# CONFIG_HZ_250 is not set

CONFIG_HZ_1000=y

CONFIG_HZ=1000

CONFIG_PREEMPT_NONE=y

# CONFIG_PREEMPT_VOLUNTARY is not set

# CONFIG_PREEMPT is not set

CONFIG_BINFMT_ELF=y

# CONFIG_BINFMT_MISC is not set

CONFIG_MATH_EMULATION=y

CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

CONFIG_ARCH_FLATMEM_ENABLE=y

CONFIG_ARCH_POPULATES_NODE_MAP=y

CONFIG_SELECT_MEMORY_MODEL=y

CONFIG_FLATMEM_MANUAL=y

# CONFIG_DISCONTIGMEM_MANUAL is not set

# CONFIG_SPARSEMEM_MANUAL is not set

CONFIG_FLATMEM=y

CONFIG_FLAT_NODE_MEM_MAP=y

# CONFIG_SPARSEMEM_STATIC is not set

CONFIG_SPLIT_PTLOCK_CPUS=4

# CONFIG_RESOURCES_64BIT is not set

# CONFIG_PROC_DEVICETREE is not set

# CONFIG_CMDLINE_BOOL is not set

# CONFIG_PM is not set

# CONFIG_SECCOMP is not set

CONFIG_ISA_DMA_API=y

#

# Bus options

#

# CONFIG_MPIC_WEIRD is not set

# CONFIG_PPC_I8259 is not set

CONFIG_FSL_SOC=y

# CONFIG_PCI is not set

# CONFIG_PCI_DOMAINS is not set

# CONFIG_PCI_QSPAN is not set

#

# PCCARD (PCMCIA/CardBus) support

#

#

# PCI Hotplug Support

#

#

# Advanced setup

#

# CONFIG_ADVANCED_OPTIONS is not set

#

# Default settings for advanced configuration options are used

#

CONFIG_HIGHMEM_START=0xfe000000

CONFIG_LOWMEM_SIZE=0x30000000

CONFIG_KERNEL_START=0xc0000000

CONFIG_TASK_SIZE=0x80000000

CONFIG_CONSISTENT_START=0xff100000

CONFIG_CONSISTENT_SIZE=0x00200000

CONFIG_BOOT_LOAD=0x00400000

#

# Networking

#

CONFIG_NET=y

#

# Networking options

#

# CONFIG_NETDEBUG is not set

CONFIG_PACKET=y

# CONFIG_PACKET_MMAP is not set

CONFIG_UNIX=y

CONFIG_XFRM=y

# CONFIG_XFRM_USER is not set

# CONFIG_XFRM_SUB_POLICY is not set

# CONFIG_NET_KEY is not set

CONFIG_INET=y

CONFIG_IP_MULTICAST=y

# CONFIG_IP_ADVANCED_ROUTER is not set

CONFIG_IP_FIB_HASH=y

CONFIG_IP_PNP=y

# CONFIG_IP_PNP_DHCP is not set

# CONFIG_IP_PNP_BOOTP is not set

# CONFIG_IP_PNP_RARP is not set

# CONFIG_NET_IPIP is not set

# CONFIG_NET_IPGRE is not set

# CONFIG_IP_MROUTE is not set

# CONFIG_ARPD is not set

CONFIG_SYN_COOKIES=y

# CONFIG_INET_AH is not set

# CONFIG_INET_ESP is not set

# CONFIG_INET_IPCOMP is not set

# CONFIG_INET_XFRM_TUNNEL is not set

# CONFIG_INET_TUNNEL is not set

CONFIG_INET_XFRM_MODE_TRANSPORT=y

CONFIG_INET_XFRM_MODE_TUNNEL=y

CONFIG_INET_XFRM_MODE_BEET=y

CONFIG_INET_DIAG=y

CONFIG_INET_TCP_DIAG=y

# CONFIG_TCP_CONG_ADVANCED is not set

CONFIG_TCP_CONG_CUBIC=y

CONFIG_DEFAULT_TCP_CONG="cubic"

# CONFIG_IPV6 is not set

# CONFIG_INET6_XFRM_TUNNEL is not set

# CONFIG_INET6_TUNNEL is not set

# CONFIG_NETWORK_SECMARK is not set

# CONFIG_NETFILTER is not set

#

# DCCP Configuration (EXPERIMENTAL)

#

# CONFIG_IP_DCCP is not set

#

# SCTP Configuration (EXPERIMENTAL)

#

# CONFIG_IP_SCTP is not set

#

# TIPC Configuration (EXPERIMENTAL)

#

# CONFIG_TIPC is not set

# CONFIG_ATM is not set

# CONFIG_BRIDGE is not set

# CONFIG_VLAN_8021Q is not set

# CONFIG_DECNET is not set

# CONFIG_LLC2 is not set

# CONFIG_IPX is not set

# CONFIG_ATALK is not set

# CONFIG_X25 is not set

# CONFIG_LAPB is not set

# CONFIG_ECONET is not set

# CONFIG_WAN_ROUTER is not set

#

# QoS and/or fair queueing

#

# CONFIG_NET_SCHED is not set

#

# Network testing

#

# CONFIG_NET_PKTGEN is not set

# CONFIG_HAMRADIO is not set

# CONFIG_IRDA is not set

# CONFIG_BT is not set

# CONFIG_IEEE80211 is not set

#

# Device Drivers

#

#

# Generic Driver Options

#

CONFIG_STANDALONE=y

CONFIG_PREVENT_FIRMWARE_BUILD=y

# CONFIG_SYS_HYPERVISOR is not set

#

# Connector - unified userspace <-> kernelspace linker

#

# CONFIG_CONNECTOR is not set

#

# Memory Technology Devices (MTD)

#

# CONFIG_MTD is not set

#

# Parallel port support

#

# CONFIG_PARPORT is not set

#

# Plug and Play support

#

#

# Block devices

#

# CONFIG_BLK_DEV_FD is not set

# CONFIG_BLK_DEV_COW_COMMON is not set

CONFIG_BLK_DEV_LOOP=y

# CONFIG_BLK_DEV_CRYPTOLOOP is not set

# CONFIG_BLK_DEV_NBD is not set

# CONFIG_BLK_DEV_RAM is not set

# CONFIG_BLK_DEV_INITRD is not set

# CONFIG_CDROM_PKTCDVD is not set

# CONFIG_ATA_OVER_ETH is not set

#

# Misc devices

#

# CONFIG_TIFM_CORE is not set

#

# ATA/ATAPI/MFM/RLL support

#

# CONFIG_IDE is not set

#

# SCSI device support

#

# CONFIG_RAID_ATTRS is not set

# CONFIG_SCSI is not set

# CONFIG_SCSI_NETLINK is not set

#

# Serial ATA (prod) and Parallel ATA (experimental) drivers

#

# CONFIG_ATA is not set

#

# Multi-device support (RAID and LVM)

#

# CONFIG_MD is not set

#

# Fusion MPT device support

#

# CONFIG_FUSION is not set

#

# IEEE 1394 (FireWire) support

#

#

# I2O device support

#

#

# Macintosh device drivers

#

# CONFIG_WINDFARM is not set

#

# Network device support

#

CONFIG_NETDEVICES=y

# CONFIG_DUMMY is not set

# CONFIG_BONDING is not set

# CONFIG_EQUALIZER is not set

# CONFIG_TUN is not set

#

# PHY device support

#

CONFIG_PHYLIB=y

#

# MII PHY device drivers

#

# CONFIG_MARVELL_PHY is not set

CONFIG_DAVICOM_PHY=y

# CONFIG_QSEMI_PHY is not set

# CONFIG_LXT_PHY is not set

# CONFIG_CICADA_PHY is not set

# CONFIG_VITESSE_PHY is not set

# CONFIG_SMSC_PHY is not set

CONFIG_FIXED_PHY=y

CONFIG_FIXED_MII_10_FDX=y

# CONFIG_FIXED_MII_100_FDX is not set

#

# Ethernet (10 or 100Mbit)

#

CONFIG_NET_ETHERNET=y

CONFIG_MII=y

# CONFIG_FEC_8XX is not set

CONFIG_FS_ENET=y

CONFIG_FS_ENET_HAS_SCC=y

CONFIG_FS_ENET_HAS_FEC=y

#

# Ethernet (1000 Mbit)

#

#

# Ethernet (10000 Mbit)

#

#

# Token Ring devices

#

#

# Wireless LAN (non-hamradio)

#

# CONFIG_NET_RADIO is not set

#

# Wan interfaces

#

# CONFIG_WAN is not set

# CONFIG_PPP is not set

# CONFIG_SLIP is not set

# CONFIG_SHAPER is not set

# CONFIG_NETCONSOLE is not set

# CONFIG_NETPOLL is not set

# CONFIG_NET_POLL_CONTROLLER is not set

#

# ISDN subsystem

#

# CONFIG_ISDN is not set

#

# Telephony Support

#

# CONFIG_PHONE is not set

#

# Input device support

#

CONFIG_INPUT=y

# CONFIG_INPUT_FF_MEMLESS is not set

#

# Userland interfaces

#

CONFIG_INPUT_MOUSEDEV=y

CONFIG_INPUT_MOUSEDEV_PSAUX=y

CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024

CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768

# CONFIG_INPUT_JOYDEV is not set

# CONFIG_INPUT_TSDEV is not set

# CONFIG_INPUT_EVDEV is not set

# CONFIG_INPUT_EVBUG is not set

#

# Input Device Drivers

#

CONFIG_INPUT_KEYBOARD=y

CONFIG_KEYBOARD_ATKBD=y

# CONFIG_KEYBOARD_SUNKBD is not set

# CONFIG_KEYBOARD_LKKBD is not set

# CONFIG_KEYBOARD_XTKBD is not set

# CONFIG_KEYBOARD_NEWTON is not set

# CONFIG_KEYBOARD_STOWAWAY is not set

CONFIG_INPUT_MOUSE=y

CONFIG_MOUSE_PS2=y

# CONFIG_MOUSE_SERIAL is not set

# CONFIG_MOUSE_VSXXXAA is not set

# CONFIG_INPUT_JOYSTICK is not set

# CONFIG_INPUT_TOUCHSCREEN is not set

# CONFIG_INPUT_MISC is not set

#

# Hardware I/O ports

#

CONFIG_SERIO=y

CONFIG_SERIO_I8042=y

CONFIG_SERIO_SERPORT=y

CONFIG_SERIO_LIBPS2=y

# CONFIG_SERIO_RAW is not set

# CONFIG_GAMEPORT is not set

#

# Character devices

#

# CONFIG_VT is not set

# CONFIG_SERIAL_NONSTANDARD is not set

#

# Serial drivers

#

# CONFIG_SERIAL_8250 is not set

#

# Non-8250 serial port support

#

CONFIG_SERIAL_CORE=y

CONFIG_SERIAL_CORE_CONSOLE=y

CONFIG_SERIAL_CPM=y

CONFIG_SERIAL_CPM_CONSOLE=y

# CONFIG_SERIAL_CPM_SCC1 is not set

# CONFIG_SERIAL_CPM_SCC2 is not set

# CONFIG_SERIAL_CPM_SCC3 is not set

# CONFIG_SERIAL_CPM_SCC4 is not set

CONFIG_SERIAL_CPM_SMC1=y

CONFIG_SERIAL_CPM_SMC2=y

CONFIG_UNIX98_PTYS=y

# CONFIG_LEGACY_PTYS is not set

#

# IPMI

#

# CONFIG_IPMI_HANDLER is not set

#

# Watchdog Cards

#

# CONFIG_WATCHDOG is not set

CONFIG_HW_RANDOM=y

# CONFIG_NVRAM is not set

CONFIG_GEN_RTC=y

# CONFIG_GEN_RTC_X is not set

# CONFIG_DTLK is not set

# CONFIG_R3964 is not set

#

# Ftape, the floppy tape device driver

#

# CONFIG_RAW_DRIVER is not set

#

# TPM devices

#

# CONFIG_TCG_TPM is not set

#

# I2C support

#

# CONFIG_I2C is not set

#

# SPI support

#

# CONFIG_SPI is not set

# CONFIG_SPI_MASTER is not set

#

# Dallas's 1-wire bus

#

# CONFIG_W1 is not set

#

# Hardware Monitoring support

#

CONFIG_HWMON=y

# CONFIG_HWMON_VID is not set

# CONFIG_SENSORS_ABITUGURU is not set

# CONFIG_SENSORS_F71805F is not set

# CONFIG_SENSORS_VT1211 is not set

# CONFIG_HWMON_DEBUG_CHIP is not set

#

# Multimedia devices

#

# CONFIG_VIDEO_DEV is not set

#

# Digital Video Broadcasting Devices

#

# CONFIG_DVB is not set

#

# Graphics support

#

CONFIG_FIRMWARE_EDID=y

# CONFIG_FB is not set

# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#

# Sound

#

# CONFIG_SOUND is not set

#

# USB support

#

# CONFIG_USB_ARCH_HAS_HCD is not set

# CONFIG_USB_ARCH_HAS_OHCI is not set

# CONFIG_USB_ARCH_HAS_EHCI is not set

#

# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'

#

#

# USB Gadget Support

#

# CONFIG_USB_GADGET is not set

#

# MMC/SD Card support

#

# CONFIG_MMC is not set

#

# LED devices

#

# CONFIG_NEW_LEDS is not set

#

# LED drivers

#

#

# LED Triggers

#

#

# InfiniBand support

#

#

# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)

#

#

# Real Time Clock

#

# CONFIG_RTC_CLASS is not set

#

# DMA Engine support

#

# CONFIG_DMA_ENGINE is not set

#

# DMA Clients

#

#

# DMA Devices

#

#

# File systems

#

CONFIG_EXT2_FS=y

CONFIG_EXT2_FS_XATTR=y

# CONFIG_EXT2_FS_POSIX_ACL is not set

# CONFIG_EXT2_FS_SECURITY is not set

# CONFIG_EXT2_FS_XIP is not set

CONFIG_EXT3_FS=y

CONFIG_EXT3_FS_XATTR=y

# CONFIG_EXT3_FS_POSIX_ACL is not set

# CONFIG_EXT3_FS_SECURITY is not set

# CONFIG_EXT4DEV_FS is not set

CONFIG_JBD=y

# CONFIG_JBD_DEBUG is not set

CONFIG_FS_MBCACHE=y

# CONFIG_REISERFS_FS is not set

# CONFIG_JFS_FS is not set

# CONFIG_FS_POSIX_ACL is not set

# CONFIG_XFS_FS is not set

# CONFIG_GFS2_FS is not set

# CONFIG_OCFS2_FS is not set

# CONFIG_MINIX_FS is not set

# CONFIG_ROMFS_FS is not set

CONFIG_INOTIFY=y

CONFIG_INOTIFY_USER=y

# CONFIG_QUOTA is not set

CONFIG_DNOTIFY=y

# CONFIG_AUTOFS_FS is not set

# CONFIG_AUTOFS4_FS is not set

# CONFIG_FUSE_FS is not set

#

# CD-ROM/DVD Filesystems

#

# CONFIG_ISO9660_FS is not set

# CONFIG_UDF_FS is not set

#

# DOS/FAT/NT Filesystems

#

# CONFIG_MSDOS_FS is not set

# CONFIG_VFAT_FS is not set

# CONFIG_NTFS_FS is not set

#

# Pseudo filesystems

#

CONFIG_PROC_FS=y

# CONFIG_PROC_KCORE is not set

CONFIG_PROC_SYSCTL=y

CONFIG_SYSFS=y

CONFIG_TMPFS=y

# CONFIG_TMPFS_POSIX_ACL is not set

# CONFIG_HUGETLB_PAGE is not set

CONFIG_RAMFS=y

# CONFIG_CONFIGFS_FS is not set

#

# Miscellaneous filesystems

#

# CONFIG_ADFS_FS is not set

# CONFIG_AFFS_FS is not set

# CONFIG_HFS_FS is not set

# CONFIG_HFSPLUS_FS is not set

# CONFIG_BEFS_FS is not set

# CONFIG_BFS_FS is not set

# CONFIG_EFS_FS is not set

CONFIG_CRAMFS=y

# CONFIG_VXFS_FS is not set

# CONFIG_HPFS_FS is not set

# CONFIG_QNX4FS_FS is not set

# CONFIG_SYSV_FS is not set

# CONFIG_UFS_FS is not set

#

# Network File Systems

#

CONFIG_NFS_FS=y

CONFIG_NFS_V3=y

# CONFIG_NFS_V3_ACL is not set

# CONFIG_NFS_V4 is not set

# CONFIG_NFS_DIRECTIO is not set

# CONFIG_NFSD is not set

CONFIG_ROOT_NFS=y

CONFIG_LOCKD=y

CONFIG_LOCKD_V4=y

CONFIG_NFS_COMMON=y

CONFIG_SUNRPC=y

# CONFIG_RPCSEC_GSS_KRB5 is not set

# CONFIG_RPCSEC_GSS_SPKM3 is not set

# CONFIG_SMB_FS is not set

# CONFIG_CIFS is not set

# CONFIG_NCP_FS is not set

# CONFIG_CODA_FS is not set

# CONFIG_AFS_FS is not set

# CONFIG_9P_FS is not set

#

# Partition Types

#

CONFIG_PARTITION_ADVANCED=y

# CONFIG_ACORN_PARTITION is not set

# CONFIG_OSF_PARTITION is not set

# CONFIG_AMIGA_PARTITION is not set

# CONFIG_ATARI_PARTITION is not set

# CONFIG_MAC_PARTITION is not set

CONFIG_MSDOS_PARTITION=y

# CONFIG_BSD_DISKLABEL is not set

# CONFIG_MINIX_SUBPARTITION is not set

# CONFIG_SOLARIS_X86_PARTITION is not set

# CONFIG_UNIXWARE_DISKLABEL is not set

# CONFIG_LDM_PARTITION is not set

# CONFIG_SGI_PARTITION is not set

# CONFIG_ULTRIX_PARTITION is not set

# CONFIG_SUN_PARTITION is not set

# CONFIG_KARMA_PARTITION is not set

# CONFIG_EFI_PARTITION is not set

#

# Native Language Support

#

# CONFIG_NLS is not set

#

# Library routines

#

CONFIG_CRC_CCITT=y

# CONFIG_CRC16 is not set

CONFIG_CRC32=y

# CONFIG_LIBCRC32C is not set

CONFIG_ZLIB_INFLATE=y

CONFIG_PLIST=y

#

# Instrumentation Support

#

# CONFIG_PROFILING is not set

#

# Kernel hacking

#

# CONFIG_PRINTK_TIME is not set

CONFIG_ENABLE_MUST_CHECK=y

# CONFIG_MAGIC_SYSRQ is not set

# CONFIG_UNUSED_SYMBOLS is not set

# CONFIG_DEBUG_KERNEL is not set

CONFIG_LOG_BUF_SHIFT=14

# CONFIG_DEBUG_FS is not set

# CONFIG_UNWIND_INFO is not set

# CONFIG_HEADERS_CHECK is not set

# CONFIG_BOOTX_TEXT is not set

# CONFIG_PPC_EARLY_DEBUG is not set

#

# Security options

#

# CONFIG_KEYS is not set

# CONFIG_SECURITY is not set

#

# Cryptographic options

#

# CONFIG_CRYPTO is not set

#

# Makefile for the PowerPC 8xx linux kernel.

#

obj-$(CONFIG_PPC_8xx)	  += m8xx_setup.o

obj-$(CONFIG_MPC885ADS)   += mpc885ads_setup.o