Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit de806b39 authored by Hans de Goede's avatar Hans de Goede Committed by Maxime Ripard
Browse files

ARM: dts: sun5i: Add new A10s r7 hdmi tv dongle board 



The R7 tv-dongle is an A10s based hdmi tv dongle, with 1G RAM, 4G nand flash,
and rtl8189es sdio wifi. It has a standard male hdmi connector, an USB host
port using an USB-A receptacle and a micro-usb receptacle for both power
and USB OTG.

Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
parent 0ed9eab3

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -348,6 +348,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \ 
	sun4i-a10-olinuxino-lime.dtb \

	sun4i-a10-pcduino.dtb \

	sun5i-a10s-olinuxino-micro.dtb \

	sun5i-a10s-r7-tv-dongle.dtb \

	sun5i-a13-olinuxino.dtb \

	sun5i-a13-olinuxino-micro.dtb \

	sun6i-a31-colombus.dtb \

arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts

0 → 100644
+100 −0
Original line number Diff line number Diff line 
/*

 * Copyright 2014 Hans de Goede <hdegoede@redhat.com>

 *

 * The code contained herein is licensed under the GNU General Public

 * License. You may obtain a copy of the GNU General Public License

 * Version 2 or later at the following locations:

 *

 * http://www.opensource.org/licenses/gpl-license.html

 * http://www.gnu.org/copyleft/gpl.html

 */



/dts-v1/;

/include/ "sun5i-a10s.dtsi"

/include/ "sunxi-common-regulators.dtsi"



/ {

	model = "R7 A10s hdmi tv-stick";

	compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s";



	soc@01c00000 {

		mmc0: mmc@01c0f000 {

			pinctrl-names = "default";

			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;

			vmmc-supply = <&reg_vcc3v3>;

			bus-width = <4>;

			cd-gpios = <&pio 6 1 0>; /* PG1 */

			cd-inverted;

			status = "okay";

		};



		mmc1: mmc@01c10000 {

			pinctrl-names = "default";

			pinctrl-0 = <&mmc1_pins_a>;

			vmmc-supply = <&reg_vcc3v3>;

			bus-width = <4>;

			non-removable;

			status = "okay";

		};



		usbphy: phy@01c13400 {

			usb1_vbus-supply = <&reg_usb1_vbus>;

			status = "okay";

		};



		ehci0: usb@01c14000 {

			status = "okay";

		};



		ohci0: usb@01c14400 {

			status = "okay";

		};



		pinctrl@01c20800 {

			mmc0_cd_pin_r7: mmc0_cd_pin@0 {

				allwinner,pins = "PG1";

				allwinner,function = "gpio_in";

				allwinner,drive = <0>;

				allwinner,pull = <1>;

			};



			led_pins_r7: led_pins@0 {

				allwinner,pins = "PB2";

				allwinner,function = "gpio_out";

				allwinner,drive = <1>;

				allwinner,pull = <0>;

			};



			usb1_vbus_pin_r7: usb1_vbus_pin@0 {

				allwinner,pins = "PG13";

				allwinner,function = "gpio_out";

				allwinner,drive = <0>;

				allwinner,pull = <0>;

			};

		};



		uart0: serial@01c28000 {

			pinctrl-names = "default";

			pinctrl-0 = <&uart0_pins_a>;

			status = "okay";

		};

	};



	leds {

		compatible = "gpio-leds";

		pinctrl-names = "default";

		pinctrl-0 = <&led_pins_r7>;



		green {

			label = "r7-tv-dongle:green:usr";

			gpios = <&pio 1 2 0>;

			default-state = "on";

		};

	};



	reg_usb1_vbus: usb1-vbus {

		pinctrl-0 = <&usb1_vbus_pin_r7>;

		gpio = <&pio 6 13 0>;

		status = "okay";

	};

};