Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit daf67dfc authored by Heiko Stuebner's avatar Heiko Stuebner Committed by Kukjin Kim
Browse files

ARM: S3C24XX: trim down debug uart handling 



Using the lowlevel debug uart is a corner case - even more so in a
multiplatform environment. So it seems reasonable to simply let the
developer set the appropriate uart type for the debugged SoC.

Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
parent 46f34abc

arch/arm/Kconfig.debug

+30 −0
Original line number Diff line number Diff line
@@ -670,6 +670,33 @@ choice 
		  The uncompressor code port configuration is now handled

		  by CONFIG_S3C_LOWLEVEL_UART_PORT.



	config DEBUG_S3C2410_UART0

		depends on ARCH_S3C24XX

		select DEBUG_S3C2410_UART

		bool "Use S3C2410/S3C2412 UART 0 for low-level debug"

		help

		  Say Y here if you want the debug print routines to direct

		  their output to UART 0. The port must have been initialised

		  by the boot-loader before use.



	config DEBUG_S3C2410_UART1

		depends on ARCH_S3C24XX

		select DEBUG_S3C2410_UART

		bool "Use S3C2410/S3C2412 UART 1 for low-level debug"

		help

		  Say Y here if you want the debug print routines to direct

		  their output to UART 1. The port must have been initialised

		  by the boot-loader before use.



	config DEBUG_S3C2410_UART2

		depends on ARCH_S3C24XX

		select DEBUG_S3C2410_UART

		bool "Use S3C2410/S3C2412 UART 2 for low-level debug"

		help

		  Say Y here if you want the debug print routines to direct

		  their output to UART 2. The port must have been initialised

		  by the boot-loader before use.



	config DEBUG_SOCFPGA_UART

		depends on ARCH_SOCFPGA

		bool "Use SOCFPGA UART for low-level debug"
@@ -921,6 +948,9 @@ endchoice 
config DEBUG_EXYNOS_UART

	bool



config DEBUG_S3C2410_UART

	bool



config DEBUG_OMAP2PLUS_UART

	bool

	depends on ARCH_OMAP2PLUS

arch/arm/mach-s3c24xx/Kconfig

+0 −28
Original line number Diff line number Diff line
@@ -39,7 +39,6 @@ config CPU_S3C2410 
	default y

	select COMMON_CLK

	select CPU_ARM920T

	select CPU_LLSERIAL_S3C2410

	select S3C2410_COMMON_CLK

	select S3C2410_DMA if S3C24XX_DMA

	select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
@@ -53,7 +52,6 @@ config CPU_S3C2412 
	bool "SAMSUNG S3C2412"

	select COMMON_CLK

	select CPU_ARM926T

	select CPU_LLSERIAL_S3C2440

	select S3C2412_COMMON_CLK

	select S3C2412_DMA if S3C24XX_DMA

	select S3C2412_PM if PM
@@ -64,7 +62,6 @@ config CPU_S3C2416 
	bool "SAMSUNG S3C2416/S3C2450"

	select COMMON_CLK

	select CPU_ARM926T

	select CPU_LLSERIAL_S3C2440

	select S3C2416_PM if PM

	select S3C2443_COMMON_CLK

	select S3C2443_DMA if S3C24XX_DMA
@@ -75,7 +72,6 @@ config CPU_S3C2440 
	bool "SAMSUNG S3C2440"

	select COMMON_CLK

	select CPU_ARM920T

	select CPU_LLSERIAL_S3C2440

	select S3C2410_COMMON_CLK

	select S3C2410_PM if PM

	select S3C2440_DMA if S3C24XX_DMA
@@ -86,7 +82,6 @@ config CPU_S3C2442 
	bool "SAMSUNG S3C2442"

	select COMMON_CLK

	select CPU_ARM920T

	select CPU_LLSERIAL_S3C2440

	select S3C2410_COMMON_CLK

	select S3C2410_DMA if S3C24XX_DMA

	select S3C2410_PM if PM
@@ -102,7 +97,6 @@ config CPU_S3C2443 
	bool "SAMSUNG S3C2443"

	select COMMON_CLK

	select CPU_ARM920T

	select CPU_LLSERIAL_S3C2440

	select S3C2443_COMMON_CLK

	select S3C2443_DMA if S3C24XX_DMA

	help
@@ -164,28 +158,6 @@ config S3C2410_PM 
	help

	  Power Management code common to S3C2410 and better



# low-level serial option nodes



config CPU_LLSERIAL_S3C2410_ONLY

	bool

	default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440



config CPU_LLSERIAL_S3C2440_ONLY

	bool

	default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410



config CPU_LLSERIAL_S3C2410

	bool

	help

	  Selected if there is an S3C2410 (or register compatible) serial

	  low-level implementation needed



config CPU_LLSERIAL_S3C2440

	bool

	help

	  Selected if there is an S3C2440 (or register compatible) serial

	  low-level implementation needed



config S3C24XX_PLL

	bool "Support CPUfreq changing of PLL frequency (EXPERIMENTAL)"

	depends on ARM_S3C24XX_CPUFREQ

arch/arm/mach-s3c24xx/include/mach/debug-macro.S

+1 −51
Original line number Diff line number Diff line
@@ -13,11 +13,9 @@ 
*/



#include <mach/map.h>

#include <mach/regs-gpio.h>

#include <linux/serial_s3c.h>



#define S3C2410_UART1_OFF (0x4000)

#define SHIFT_2440TXF (14-9)



	.macro addruart, rp, rv, tmp

		ldr	\rp, = S3C24XX_PA_UART
@@ -28,56 +26,11 @@ 
#endif

	.endm



	.macro fifo_full_s3c24xx rd, rx

		@ check for arm920 vs arm926. currently assume all arm926

		@ devices have an 64 byte FIFO identical to the s3c2440

		mrc	p15, 0, \rd, c0, c0

		and	\rd, \rd, #0xff0

		teq	\rd, #0x260

		beq	1004f

		mrc	p15, 0, \rd, c1, c0

		tst	\rd, #1

		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)

		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)

		bic	\rd, \rd, #0xff000

		ldr	\rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)]

		and	\rd, \rd, #0x00ff0000

		teq	\rd, #0x00440000		@ is it 2440?

1004:

		ldr	\rd, [\rx, # S3C2410_UFSTAT]

		moveq	\rd, \rd, lsr #SHIFT_2440TXF

		tst	\rd, #S3C2410_UFSTAT_TXFULL

	.endm



	.macro  fifo_full_s3c2410 rd, rx

		ldr	\rd, [\rx, # S3C2410_UFSTAT]

		tst	\rd, #S3C2410_UFSTAT_TXFULL

	.endm



/* fifo level reading */



	.macro fifo_level_s3c24xx rd, rx

		@ check for arm920 vs arm926. currently assume all arm926

		@ devices have an 64 byte FIFO identical to the s3c2440

		mrc	p15, 0, \rd, c0, c0

		and	\rd, \rd, #0xff0

		teq	\rd, #0x260

		beq	10000f

		mrc	p15, 0, \rd, c1, c0

		tst	\rd, #1

		addeq	\rd, \rx, #(S3C24XX_PA_GPIO - S3C24XX_PA_UART)

		addne	\rd, \rx, #(S3C24XX_VA_GPIO - S3C24XX_VA_UART)

		bic	\rd, \rd, #0xff000

		ldr	\rd, [\rd, # S3C2410_GSTATUS1 - S3C2410_GPIOREG(0)]

		and	\rd, \rd, #0x00ff0000

		teq	\rd, #0x00440000		@ is it 2440?



10000:

		ldr	\rd, [\rx, # S3C2410_UFSTAT]

		andne	\rd, \rd, #S3C2410_UFSTAT_TXMASK

		andeq	\rd, \rd, #S3C2440_UFSTAT_TXMASK

	.endm



	.macro fifo_level_s3c2410 rd, rx

		ldr	\rd, [\rx, # S3C2410_UFSTAT]

		and	\rd, \rd, #S3C2410_UFSTAT_TXMASK
@@ -88,12 +41,9 @@ 
 * used variants of these

*/



#if defined(CONFIG_CPU_LLSERIAL_S3C2410_ONLY)

#if defined(CONFIG_DEBUG_S3C2410_UART)

#define fifo_full  fifo_full_s3c2410

#define fifo_level fifo_level_s3c2410

#elif !defined(CONFIG_CPU_LLSERIAL_S3C2440_ONLY)

#define fifo_full  fifo_full_s3c24xx

#define fifo_level fifo_level_s3c24xx

#endif



/* include the reset of the code which will do the work */