Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit d5aa11bf authored by Milo Kim's avatar Milo Kim Committed by Lee Jones
Browse files

mfd: Add TI LMU driver 



TI LMU (Lighting Management Unit) driver supports lighting devices below.

  LM3532, LM3631, LM3632, LM3633, LM3695 and LM3697.

LMU devices have common features.
  - I2C interface for accessing device registers
  - Hardware enable pin control
  - Backlight brightness control
  - Notifier for hardware fault monitoring
  - Regulators for LCD display bias

It contains fault monitor, backlight, LED and regulator driver.

LMU fault monitor
-----------------
  LM3633 and LM3697 provide hardware monitoring feature.
  It enables open or short circuit detection.
  After monitoring is done, each device should be re-initialized.
  Notifier is used for this case.
  Separate patch for 'ti-lmu-fault-monitor' will be sent later.

Backlight
---------
  It's handled by TI LMU backlight consolidated driver and
  chip dependent data. Separate patchset will be sent later.

LED indicator
-------------
  LM3633 has 6 indicator LEDs. Programmable dimming pattern is also
  supported. Separate patch for 'leds-lm3633' will be sent later.

Regulator
---------
  LM3631 has 5 regulators for the display bias.
  LM3632 supports 3 regulators. One consolidated driver enables it.
  The lm363x regulator driver is already upstreamed.

Signed-off-by: default avatarMilo Kim <milo.kim@ti.com>
Tested-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarLee Jones <lee.jones@linaro.org>
parent 287cce71

drivers/mfd/Kconfig

+12 −0
Original line number Original line Diff line number Diff line
@@ -1181,6 +1181,18 @@ config MFD_LP8788 
	  TI LP8788 PMU supports regulators, battery charger, RTC,

	  TI LP8788 PMU supports regulators, battery charger, RTC,

	  ADC, backlight driver and current sinks.

	  ADC, backlight driver and current sinks.





config MFD_TI_LMU

	tristate "TI Lighting Management Unit driver"

	depends on I2C

	select MFD_CORE

	select REGMAP_I2C

	help

	  Say yes here to enable support for TI LMU chips.



	  TI LMU MFD supports LM3532, LM3631, LM3632, LM3633, LM3695 and LM3697.

	  It consists of backlight, LED and regulator driver.

	  It provides consistent device controls for lighting functions.



config MFD_OMAP_USB_HOST

config MFD_OMAP_USB_HOST

	bool "TI OMAP USBHS core and TLL driver"

	bool "TI OMAP USBHS core and TLL driver"

	depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3

	depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3

drivers/mfd/Makefile

+2 −0
Original line number Original line Diff line number Diff line
@@ -127,6 +127,8 @@ obj-$(CONFIG_MFD_AXP20X_RSB) += axp20x-rsb.o 
obj-$(CONFIG_MFD_LP3943)	+= lp3943.o

obj-$(CONFIG_MFD_LP3943)	+= lp3943.o

obj-$(CONFIG_MFD_LP8788)	+= lp8788.o lp8788-irq.o

obj-$(CONFIG_MFD_LP8788)	+= lp8788.o lp8788-irq.o





obj-$(CONFIG_MFD_TI_LMU)	+= ti-lmu.o



da9055-objs			:= da9055-core.o da9055-i2c.o

da9055-objs			:= da9055-core.o da9055-i2c.o

obj-$(CONFIG_MFD_DA9055)	+= da9055.o

obj-$(CONFIG_MFD_DA9055)	+= da9055.o

obj-$(CONFIG_MFD_DA9062)	+= da9062-core.o

obj-$(CONFIG_MFD_DA9062)	+= da9062-core.o

drivers/mfd/ti-lmu.c

0 → 100644
+259 −0
Original line number Original line Diff line number Diff line 
/*

 * TI LMU (Lighting Management Unit) Core Driver

 *

 * Copyright 2017 Texas Instruments

 *

 * Author: Milo Kim <milo.kim@ti.com>

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */



#include <linux/delay.h>

#include <linux/err.h>

#include <linux/gpio.h>

#include <linux/i2c.h>

#include <linux/kernel.h>

#include <linux/mfd/core.h>

#include <linux/mfd/ti-lmu.h>

#include <linux/mfd/ti-lmu-register.h>

#include <linux/module.h>

#include <linux/of.h>

#include <linux/of_device.h>

#include <linux/of_gpio.h>

#include <linux/slab.h>



struct ti_lmu_data {

	struct mfd_cell *cells;

	int num_cells;

	unsigned int max_register;

};



static int ti_lmu_enable_hw(struct ti_lmu *lmu, enum ti_lmu_id id)

{

	int ret;



	if (gpio_is_valid(lmu->en_gpio)) {

		ret = devm_gpio_request_one(lmu->dev, lmu->en_gpio,

					    GPIOF_OUT_INIT_HIGH, "lmu_hwen");

		if (ret) {

			dev_err(lmu->dev, "Can not request enable GPIO: %d\n",

				ret);

			return ret;

		}

	}



	/* Delay about 1ms after HW enable pin control */

	usleep_range(1000, 1500);



	/* LM3631 has additional power up sequence - enable LCD_EN bit. */

	if (id == LM3631) {

		return regmap_update_bits(lmu->regmap, LM3631_REG_DEVCTRL,

					  LM3631_LCD_EN_MASK,

					  LM3631_LCD_EN_MASK);

	}



	return 0;

}



static void ti_lmu_disable_hw(struct ti_lmu *lmu)

{

	if (gpio_is_valid(lmu->en_gpio))

		gpio_set_value(lmu->en_gpio, 0);

}



static struct mfd_cell lm3532_devices[] = {

	{

		.name          = "ti-lmu-backlight",

		.id            = LM3532,

		.of_compatible = "ti,lm3532-backlight",

	},

};



#define LM363X_REGULATOR(_id)			\

{						\

	.name          = "lm363x-regulator",	\

	.id            = _id,			\

	.of_compatible = "ti,lm363x-regulator",	\

}						\



static struct mfd_cell lm3631_devices[] = {

	LM363X_REGULATOR(LM3631_BOOST),

	LM363X_REGULATOR(LM3631_LDO_CONT),

	LM363X_REGULATOR(LM3631_LDO_OREF),

	LM363X_REGULATOR(LM3631_LDO_POS),

	LM363X_REGULATOR(LM3631_LDO_NEG),

	{

		.name          = "ti-lmu-backlight",

		.id            = LM3631,

		.of_compatible = "ti,lm3631-backlight",

	},

};



static struct mfd_cell lm3632_devices[] = {

	LM363X_REGULATOR(LM3632_BOOST),

	LM363X_REGULATOR(LM3632_LDO_POS),

	LM363X_REGULATOR(LM3632_LDO_NEG),

	{

		.name          = "ti-lmu-backlight",

		.id            = LM3632,

		.of_compatible = "ti,lm3632-backlight",

	},

};



static struct mfd_cell lm3633_devices[] = {

	{

		.name          = "ti-lmu-backlight",

		.id            = LM3633,

		.of_compatible = "ti,lm3633-backlight",

	},

	{

		.name          = "lm3633-leds",

		.of_compatible = "ti,lm3633-leds",

	},

	/* Monitoring driver for open/short circuit detection */

	{

		.name          = "ti-lmu-fault-monitor",

		.id            = LM3633,

		.of_compatible = "ti,lm3633-fault-monitor",

	},

};



static struct mfd_cell lm3695_devices[] = {

	{

		.name          = "ti-lmu-backlight",

		.id            = LM3695,

		.of_compatible = "ti,lm3695-backlight",

	},

};



static struct mfd_cell lm3697_devices[] = {

	{

		.name          = "ti-lmu-backlight",

		.id            = LM3697,

		.of_compatible = "ti,lm3697-backlight",

	},

	/* Monitoring driver for open/short circuit detection */

	{

		.name          = "ti-lmu-fault-monitor",

		.id            = LM3697,

		.of_compatible = "ti,lm3697-fault-monitor",

	},

};



#define TI_LMU_DATA(chip, max_reg)		\

static const struct ti_lmu_data chip##_data =	\

{						\

	.cells = chip##_devices,		\

	.num_cells = ARRAY_SIZE(chip##_devices),\

	.max_register = max_reg,		\

}						\



TI_LMU_DATA(lm3532, LM3532_MAX_REG);

TI_LMU_DATA(lm3631, LM3631_MAX_REG);

TI_LMU_DATA(lm3632, LM3632_MAX_REG);

TI_LMU_DATA(lm3633, LM3633_MAX_REG);

TI_LMU_DATA(lm3695, LM3695_MAX_REG);

TI_LMU_DATA(lm3697, LM3697_MAX_REG);



static const struct of_device_id ti_lmu_of_match[] = {

	{ .compatible = "ti,lm3532", .data = &lm3532_data },

	{ .compatible = "ti,lm3631", .data = &lm3631_data },

	{ .compatible = "ti,lm3632", .data = &lm3632_data },

	{ .compatible = "ti,lm3633", .data = &lm3633_data },

	{ .compatible = "ti,lm3695", .data = &lm3695_data },

	{ .compatible = "ti,lm3697", .data = &lm3697_data },

	{ }

};

MODULE_DEVICE_TABLE(of, ti_lmu_of_match);



static int ti_lmu_probe(struct i2c_client *cl, const struct i2c_device_id *id)

{

	struct device *dev = &cl->dev;

	const struct of_device_id *match;

	const struct ti_lmu_data *data;

	struct regmap_config regmap_cfg;

	struct ti_lmu *lmu;

	int ret;



	match = of_match_device(ti_lmu_of_match, dev);

	if (!match)

		return -ENODEV;

	/*

	 * Get device specific data from of_match table.

	 * This data is defined by using TI_LMU_DATA() macro.

	 */

	data = (struct ti_lmu_data *)match->data;



	lmu = devm_kzalloc(dev, sizeof(*lmu), GFP_KERNEL);

	if (!lmu)

		return -ENOMEM;



	lmu->dev = &cl->dev;



	/* Setup regmap */

	memset(&regmap_cfg, 0, sizeof(struct regmap_config));

	regmap_cfg.reg_bits = 8;

	regmap_cfg.val_bits = 8;

	regmap_cfg.name = id->name;

	regmap_cfg.max_register = data->max_register;



	lmu->regmap = devm_regmap_init_i2c(cl, &regmap_cfg);

	if (IS_ERR(lmu->regmap))

		return PTR_ERR(lmu->regmap);



	/* HW enable pin control and additional power up sequence if required */

	lmu->en_gpio = of_get_named_gpio(dev->of_node, "enable-gpios", 0);

	ret = ti_lmu_enable_hw(lmu, id->driver_data);

	if (ret)

		return ret;



	/*

	 * Fault circuit(open/short) can be detected by ti-lmu-fault-monitor.

	 * After fault detection is done, some devices should re-initialize

	 * configuration. The notifier enables such kind of handling.

	 */

	BLOCKING_INIT_NOTIFIER_HEAD(&lmu->notifier);



	i2c_set_clientdata(cl, lmu);



	return mfd_add_devices(lmu->dev, 0, data->cells,

			       data->num_cells, NULL, 0, NULL);

}



static int ti_lmu_remove(struct i2c_client *cl)

{

	struct ti_lmu *lmu = i2c_get_clientdata(cl);



	ti_lmu_disable_hw(lmu);

	mfd_remove_devices(lmu->dev);

	return 0;

}



static const struct i2c_device_id ti_lmu_ids[] = {

	{ "lm3532", LM3532 },

	{ "lm3631", LM3631 },

	{ "lm3632", LM3632 },

	{ "lm3633", LM3633 },

	{ "lm3695", LM3695 },

	{ "lm3697", LM3697 },

	{ }

};

MODULE_DEVICE_TABLE(i2c, ti_lmu_ids);



static struct i2c_driver ti_lmu_driver = {

	.probe = ti_lmu_probe,

	.remove = ti_lmu_remove,

	.driver = {

		.name = "ti-lmu",

		.of_match_table = ti_lmu_of_match,

	},

	.id_table = ti_lmu_ids,

};



module_i2c_driver(ti_lmu_driver);



MODULE_DESCRIPTION("TI LMU MFD Core Driver");

MODULE_AUTHOR("Milo Kim");

MODULE_LICENSE("GPL v2");

include/linux/mfd/ti-lmu-register.h

0 → 100644
+280 −0
Original line number Original line Diff line number Diff line 
/*

 * TI LMU (Lighting Management Unit) Device Register Map

 *

 * Copyright 2017 Texas Instruments

 *

 * Author: Milo Kim <milo.kim@ti.com>

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */



#ifndef __MFD_TI_LMU_REGISTER_H__

#define __MFD_TI_LMU_REGISTER_H__



#include <linux/bitops.h>



/* LM3532 */

#define LM3532_REG_OUTPUT_CFG			0x10

#define LM3532_ILED1_CFG_MASK			0x03

#define LM3532_ILED2_CFG_MASK			0x0C

#define LM3532_ILED3_CFG_MASK			0x30

#define LM3532_ILED1_CFG_SHIFT			0

#define LM3532_ILED2_CFG_SHIFT			2

#define LM3532_ILED3_CFG_SHIFT			4



#define LM3532_REG_RAMPUP			0x12

#define LM3532_REG_RAMPDN			LM3532_REG_RAMPUP

#define LM3532_RAMPUP_MASK			0x07

#define LM3532_RAMPUP_SHIFT			0

#define LM3532_RAMPDN_MASK			0x38

#define LM3532_RAMPDN_SHIFT			3



#define LM3532_REG_ENABLE			0x1D



#define LM3532_REG_PWM_A_CFG			0x13

#define LM3532_PWM_A_MASK			0x05	/* zone 0 */

#define LM3532_PWM_ZONE_0			BIT(2)



#define LM3532_REG_PWM_B_CFG			0x14

#define LM3532_PWM_B_MASK			0x09	/* zone 1 */

#define LM3532_PWM_ZONE_1			BIT(3)



#define LM3532_REG_PWM_C_CFG			0x15

#define LM3532_PWM_C_MASK			0x11	/* zone 2 */

#define LM3532_PWM_ZONE_2			BIT(4)



#define LM3532_REG_ZONE_CFG_A			0x16

#define LM3532_REG_ZONE_CFG_B			0x18

#define LM3532_REG_ZONE_CFG_C			0x1A

#define LM3532_ZONE_MASK			(BIT(2) | BIT(3) | BIT(4))

#define LM3532_ZONE_0				0

#define LM3532_ZONE_1				BIT(2)

#define LM3532_ZONE_2				BIT(3)



#define LM3532_REG_BRT_A			0x70	/* zone 0 */

#define LM3532_REG_BRT_B			0x76	/* zone 1 */

#define LM3532_REG_BRT_C			0x7C	/* zone 2 */



#define LM3532_MAX_REG				0x7E



/* LM3631 */

#define LM3631_REG_DEVCTRL			0x00

#define LM3631_LCD_EN_MASK			BIT(1)

#define LM3631_BL_EN_MASK			BIT(0)



#define LM3631_REG_BRT_LSB			0x01

#define LM3631_REG_BRT_MSB			0x02



#define LM3631_REG_BL_CFG			0x06

#define LM3631_BL_CHANNEL_MASK			BIT(3)

#define LM3631_BL_DUAL_CHANNEL			0

#define LM3631_BL_SINGLE_CHANNEL		BIT(3)

#define LM3631_MAP_MASK				BIT(5)

#define LM3631_EXPONENTIAL_MAP			0



#define LM3631_REG_BRT_MODE			0x08

#define LM3631_MODE_MASK			(BIT(1) | BIT(2) | BIT(3))

#define LM3631_DEFAULT_MODE			(BIT(1) | BIT(3))



#define LM3631_REG_SLOPE			0x09

#define LM3631_SLOPE_MASK			0xF0

#define LM3631_SLOPE_SHIFT			4



#define LM3631_REG_LDO_CTRL1			0x0A

#define LM3631_EN_OREF_MASK			BIT(0)

#define LM3631_EN_VNEG_MASK			BIT(1)

#define LM3631_EN_VPOS_MASK			BIT(2)



#define LM3631_REG_LDO_CTRL2			0x0B

#define LM3631_EN_CONT_MASK			BIT(0)



#define LM3631_REG_VOUT_CONT			0x0C

#define LM3631_VOUT_CONT_MASK			(BIT(6) | BIT(7))



#define LM3631_REG_VOUT_BOOST			0x0C

#define LM3631_REG_VOUT_POS			0x0D

#define LM3631_REG_VOUT_NEG			0x0E

#define LM3631_REG_VOUT_OREF			0x0F

#define LM3631_VOUT_MASK			0x3F



#define LM3631_REG_ENTIME_VCONT			0x0B

#define LM3631_ENTIME_CONT_MASK			0x70



#define LM3631_REG_ENTIME_VOREF			0x0F

#define LM3631_REG_ENTIME_VPOS			0x10

#define LM3631_REG_ENTIME_VNEG			0x11

#define LM3631_ENTIME_MASK			0xF0

#define LM3631_ENTIME_SHIFT			4



#define LM3631_MAX_REG				0x16



/* LM3632 */

#define LM3632_REG_CONFIG1			0x02

#define LM3632_OVP_MASK				(BIT(5) | BIT(6) | BIT(7))

#define LM3632_OVP_25V				BIT(6)



#define LM3632_REG_CONFIG2			0x03

#define LM3632_SWFREQ_MASK			BIT(7)

#define LM3632_SWFREQ_1MHZ			BIT(7)



#define LM3632_REG_BRT_LSB			0x04

#define LM3632_REG_BRT_MSB			0x05



#define LM3632_REG_IO_CTRL			0x09

#define LM3632_PWM_MASK				BIT(6)

#define LM3632_I2C_MODE				0

#define LM3632_PWM_MODE				BIT(6)



#define LM3632_REG_ENABLE			0x0A

#define LM3632_BL_EN_MASK			BIT(0)

#define LM3632_BL_CHANNEL_MASK			(BIT(3) | BIT(4))

#define LM3632_BL_SINGLE_CHANNEL			BIT(4)

#define LM3632_BL_DUAL_CHANNEL			BIT(3)



#define LM3632_REG_BIAS_CONFIG			0x0C

#define LM3632_EXT_EN_MASK			BIT(0)

#define LM3632_EN_VNEG_MASK			BIT(1)

#define LM3632_EN_VPOS_MASK			BIT(2)



#define LM3632_REG_VOUT_BOOST			0x0D

#define LM3632_REG_VOUT_POS			0x0E

#define LM3632_REG_VOUT_NEG			0x0F

#define LM3632_VOUT_MASK			0x3F



#define LM3632_MAX_REG				0x10



/* LM3633 */

#define LM3633_REG_HVLED_OUTPUT_CFG		0x10

#define LM3633_HVLED1_CFG_MASK			BIT(0)

#define LM3633_HVLED2_CFG_MASK			BIT(1)

#define LM3633_HVLED3_CFG_MASK			BIT(2)

#define LM3633_HVLED1_CFG_SHIFT			0

#define LM3633_HVLED2_CFG_SHIFT			1

#define LM3633_HVLED3_CFG_SHIFT			2



#define LM3633_REG_BANK_SEL			0x11



#define LM3633_REG_BL0_RAMP			0x12

#define LM3633_REG_BL1_RAMP			0x13

#define LM3633_BL_RAMPUP_MASK			0xF0

#define LM3633_BL_RAMPUP_SHIFT			4

#define LM3633_BL_RAMPDN_MASK			0x0F

#define LM3633_BL_RAMPDN_SHIFT			0



#define LM3633_REG_BL_RAMP_CONF			0x1B

#define LM3633_BL_RAMP_MASK			0x0F

#define LM3633_BL_RAMP_EACH			0x05



#define LM3633_REG_PTN0_RAMP			0x1C

#define LM3633_REG_PTN1_RAMP			0x1D

#define LM3633_PTN_RAMPUP_MASK			0x70

#define LM3633_PTN_RAMPUP_SHIFT			4

#define LM3633_PTN_RAMPDN_MASK			0x07

#define LM3633_PTN_RAMPDN_SHIFT			0



#define LM3633_REG_LED_MAPPING_MODE		0x1F

#define LM3633_LED_EXPONENTIAL			BIT(1)



#define LM3633_REG_IMAX_HVLED_A			0x20

#define LM3633_REG_IMAX_HVLED_B			0x21

#define LM3633_REG_IMAX_LVLED_BASE		0x22



#define LM3633_REG_BL_FEEDBACK_ENABLE		0x28



#define LM3633_REG_ENABLE			0x2B

#define LM3633_LED_BANK_OFFSET			2



#define LM3633_REG_PATTERN			0x2C



#define LM3633_REG_BOOST_CFG			0x2D

#define LM3633_OVP_MASK				(BIT(1) | BIT(2))

#define LM3633_OVP_40V				0x6



#define LM3633_REG_PWM_CFG			0x2F

#define LM3633_PWM_A_MASK			BIT(0)

#define LM3633_PWM_B_MASK			BIT(1)



#define LM3633_REG_BRT_HVLED_A_LSB		0x40

#define LM3633_REG_BRT_HVLED_A_MSB		0x41

#define LM3633_REG_BRT_HVLED_B_LSB		0x42

#define LM3633_REG_BRT_HVLED_B_MSB		0x43



#define LM3633_REG_BRT_LVLED_BASE		0x44



#define LM3633_REG_PTN_DELAY			0x50



#define LM3633_REG_PTN_LOWTIME			0x51



#define LM3633_REG_PTN_HIGHTIME			0x52



#define LM3633_REG_PTN_LOWBRT			0x53



#define LM3633_REG_PTN_HIGHBRT			LM3633_REG_BRT_LVLED_BASE



#define LM3633_REG_BL_OPEN_FAULT_STATUS		0xB0



#define LM3633_REG_BL_SHORT_FAULT_STATUS	0xB2



#define LM3633_REG_MONITOR_ENABLE		0xB4



#define LM3633_MAX_REG				0xB4



/* LM3695 */

#define LM3695_REG_GP				0x10

#define LM3695_BL_CHANNEL_MASK			BIT(3)

#define LM3695_BL_DUAL_CHANNEL			0

#define LM3695_BL_SINGLE_CHANNEL			BIT(3)

#define LM3695_BRT_RW_MASK			BIT(2)

#define LM3695_BL_EN_MASK			BIT(0)



#define LM3695_REG_BRT_LSB			0x13

#define LM3695_REG_BRT_MSB			0x14



#define LM3695_MAX_REG				0x14



/* LM3697 */

#define LM3697_REG_HVLED_OUTPUT_CFG		0x10

#define LM3697_HVLED1_CFG_MASK			BIT(0)

#define LM3697_HVLED2_CFG_MASK			BIT(1)

#define LM3697_HVLED3_CFG_MASK			BIT(2)

#define LM3697_HVLED1_CFG_SHIFT			0

#define LM3697_HVLED2_CFG_SHIFT			1

#define LM3697_HVLED3_CFG_SHIFT			2



#define LM3697_REG_BL0_RAMP			0x11

#define LM3697_REG_BL1_RAMP			0x12

#define LM3697_RAMPUP_MASK			0xF0

#define LM3697_RAMPUP_SHIFT			4

#define LM3697_RAMPDN_MASK			0x0F

#define LM3697_RAMPDN_SHIFT			0



#define LM3697_REG_RAMP_CONF			0x14

#define LM3697_RAMP_MASK			0x0F

#define LM3697_RAMP_EACH			0x05



#define LM3697_REG_PWM_CFG			0x1C

#define LM3697_PWM_A_MASK			BIT(0)

#define LM3697_PWM_B_MASK			BIT(1)



#define LM3697_REG_IMAX_A			0x17

#define LM3697_REG_IMAX_B			0x18



#define LM3697_REG_FEEDBACK_ENABLE		0x19



#define LM3697_REG_BRT_A_LSB			0x20

#define LM3697_REG_BRT_A_MSB			0x21

#define LM3697_REG_BRT_B_LSB			0x22

#define LM3697_REG_BRT_B_MSB			0x23



#define LM3697_REG_ENABLE			0x24



#define LM3697_REG_OPEN_FAULT_STATUS		0xB0



#define LM3697_REG_SHORT_FAULT_STATUS		0xB2



#define LM3697_REG_MONITOR_ENABLE		0xB4



#define LM3697_MAX_REG				0xB4

#endif

include/linux/mfd/ti-lmu.h

0 → 100644
+87 −0
Original line number Original line Diff line number Diff line 
/*

 * TI LMU (Lighting Management Unit) Devices

 *

 * Copyright 2017 Texas Instruments

 *

 * Author: Milo Kim <milo.kim@ti.com>

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */



#ifndef __MFD_TI_LMU_H__

#define __MFD_TI_LMU_H__



#include <linux/gpio.h>

#include <linux/notifier.h>

#include <linux/regmap.h>



/* Notifier event */

#define LMU_EVENT_MONITOR_DONE		0x01



enum ti_lmu_id {

	LM3532,

	LM3631,

	LM3632,

	LM3633,

	LM3695,

	LM3697,

	LMU_MAX_ID,

};



enum ti_lmu_max_current {

	LMU_IMAX_5mA,

	LMU_IMAX_6mA,

	LMU_IMAX_7mA = 0x03,

	LMU_IMAX_8mA,

	LMU_IMAX_9mA,

	LMU_IMAX_10mA = 0x07,

	LMU_IMAX_11mA,

	LMU_IMAX_12mA,

	LMU_IMAX_13mA,

	LMU_IMAX_14mA,

	LMU_IMAX_15mA = 0x0D,

	LMU_IMAX_16mA,

	LMU_IMAX_17mA,

	LMU_IMAX_18mA,

	LMU_IMAX_19mA,

	LMU_IMAX_20mA = 0x13,

	LMU_IMAX_21mA,

	LMU_IMAX_22mA,

	LMU_IMAX_23mA = 0x17,

	LMU_IMAX_24mA,

	LMU_IMAX_25mA,

	LMU_IMAX_26mA,

	LMU_IMAX_27mA = 0x1C,

	LMU_IMAX_28mA,

	LMU_IMAX_29mA,

	LMU_IMAX_30mA,

};



enum lm363x_regulator_id {

	LM3631_BOOST,		/* Boost output */

	LM3631_LDO_CONT,	/* Display panel controller */

	LM3631_LDO_OREF,	/* Gamma reference */

	LM3631_LDO_POS,		/* Positive display bias output */

	LM3631_LDO_NEG,		/* Negative display bias output */

	LM3632_BOOST,		/* Boost output */

	LM3632_LDO_POS,		/* Positive display bias output */

	LM3632_LDO_NEG,		/* Negative display bias output */

};



/**

 * struct ti_lmu

 *

 * @dev:	Parent device pointer

 * @regmap:	Used for i2c communcation on accessing registers

 * @en_gpio:	GPIO for HWEN pin [Optional]

 * @notifier:	Notifier for reporting hwmon event

 */

struct ti_lmu {

	struct device *dev;

	struct regmap *regmap;

	int en_gpio;

	struct blocking_notifier_head notifier;

};

#endif