media: staging: atomisp: Remove AP1302 sensor support

	 It currently only works with the atomisp driver.

config VIDEO_ATOMISP_AP1302

       tristate "AP1302 external ISP support"

       depends on I2C && VIDEO_V4L2

       select REGMAP_I2C

       ---help---

	 This is a Video4Linux2 sensor-level driver for the external

	 ISP AP1302.

	 AP1302 is an exteral ISP.

	 It currently only works with the atomisp driver.

config VIDEO_ATOMISP_GC0310

	tristate "GC0310 sensor support"

	depends on I2C && VIDEO_V4L2

obj-$(CONFIG_VIDEO_ATOMISP_MSRLIST_HELPER) += atomisp-libmsrlisthelper.o

obj-$(CONFIG_VIDEO_ATOMISP_AP1302)     += atomisp-ap1302.o

# Makefile for flash drivers

#

/*

 *

 * Copyright (c) 2013 Intel Corporation. All Rights Reserved.

 *

 * This program is free software; you can redistribute it and/or

 * modify it under the terms of the GNU General Public License version

 * 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 *

 * You should have received a copy of the GNU General Public License

 * along with this program; if not, write to the Free Software

 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA

 * 02110-1301, USA.

 *

 */

#ifndef __AP1302_H__

#define __AP1302_H__

#include "../include/linux/atomisp_platform.h"

#include <linux/regmap.h>

#include <linux/types.h>

#include <media/v4l2-ctrls.h>

#include <media/v4l2-subdev.h>

#define AP1302_NAME		"ap1302"

#define AP1302_CHIP_ID		0x265

#define AP1302_I2C_MAX_LEN	65534

#define AP1302_FW_WINDOW_OFFSET	0x8000

#define AP1302_FW_WINDOW_SIZE	0x2000

#define AP1302_REG16		2

#define AP1302_REG32		4

#define REG_CHIP_VERSION	0x0000

#define REG_CHIP_REV		0x0050

#define REG_MF_ID		0x0004

#define REG_ERROR		0x0006

#define REG_CTRL		0x1000

#define REG_DZ_TGT_FCT		0x1010

#define REG_SFX_MODE		0x1016

#define REG_SS_HEAD_PT0		0x1174

#define REG_AE_BV_OFF		0x5014

#define REG_AE_BV_BIAS		0x5016

#define REG_AWB_CTRL		0x5100

#define REG_FLICK_CTRL		0x5440

#define REG_SCENE_CTRL		0x5454

#define REG_BOOTDATA_STAGE	0x6002

#define REG_SENSOR_SELECT	0x600C

#define REG_SYS_START		0x601A

#define REG_SIP_CRC		0xF052

#define REG_PREVIEW_BASE	0x2000

#define REG_SNAPSHOT_BASE	0x3000

#define REG_VIDEO_BASE		0x4000

#define CNTX_WIDTH		0x00

#define CNTX_HEIGHT		0x02

#define CNTX_ROI_X0		0x04

#define CNTX_ROI_Y0		0x06

#define CNTX_ROI_X1		0x08

#define CNTX_ROI_Y1		0x0A

#define CNTX_ASPECT		0x0C

#define CNTX_LOCK		0x0E

#define CNTX_ENABLE		0x10

#define CNTX_OUT_FMT		0x12

#define CNTX_SENSOR_MODE	0x14

#define CNTX_MIPI_CTRL		0x16

#define CNTX_MIPI_II_CTRL	0x18

#define CNTX_LINE_TIME		0x1C

#define CNTX_MAX_FPS		0x20

#define CNTX_AE_USG		0x22

#define CNTX_AE_UPPER_ET	0x24

#define CNTX_AE_MAX_ET		0x28

#define CNTX_SS			0x2C

#define CNTX_S1_SENSOR_MODE	0x2E

#define CNTX_HINF_CTRL		0x30

#define CTRL_CNTX_MASK		0x03

#define CTRL_CNTX_OFFSET	0x00

#define HINF_CTRL_LANE_MASK	0x07

#define HINF_CTRL_LANE_OFFSET	0x00

#define MIPI_CTRL_IMGVC_MASK	0xC0

#define MIPI_CTRL_IMGVC_OFFSET	0x06

#define MIPI_CTRL_IMGTYPE_AUTO	0x3F

#define MIPI_CTRL_SSVC_MASK	0xC000

#define MIPI_CTRL_SSVC_OFFSET	0x0E

#define MIPI_CTRL_SSTYPE_MASK	0x3F00

#define MIPI_CTRL_SSTYPE_OFFSET	0x08

#define OUT_FMT_IIS_MASK	0x30

#define OUT_FMT_IIS_OFFSET	0x08

#define OUT_FMT_SS_MASK		0x1000

#define OUT_FMT_SS_OFFSET	0x12

#define OUT_FMT_TYPE_MASK	0xFF

#define SENSOR_SELECT_MASK	0x03

#define SENSOR_SELECT_OFFSET	0x00

#define AWB_CTRL_MODE_MASK	0x0F

#define AWB_CTRL_MODE_OFFSET	0x00

#define AWB_CTRL_FLASH_MASK	0x100

#define AP1302_FMT_UYVY422	0x50

#define AP1302_SYS_ACTIVATE	0x8010

#define AP1302_SYS_SWITCH	0x8140

#define AP1302_SENSOR_PRI	0x01

#define AP1302_SENSOR_SEC	0x02

#define AP1302_SS_CTRL		0x31

#define AP1302_MAX_RATIO_MISMATCH	10 /* Unit in percentage */

#define AP1302_MAX_EV		2

#define AP1302_MIN_EV		-2

enum ap1302_contexts {

	CONTEXT_PREVIEW = 0,

	CONTEXT_SNAPSHOT,

	CONTEXT_VIDEO,

	CONTEXT_NUM

};

/* The context registers are defined according to preview/video registers.

   Preview and video context have the same register definition.

   But snapshot context does not have register S1_SENSOR_MODE.

   When setting snapshot registers, if the offset exceeds

   S1_SENSOR_MODE, the actual offset needs to minus 2. */

struct ap1302_context_config {

	u16 width;

	u16 height;

	u16 roi_x0;

	u16 roi_y0;

	u16 roi_x1;

	u16 roi_y1;

	u16 aspect_factor;

	u16 lock;

	u16 enable;

	u16 out_fmt;

	u16 sensor_mode;

	u16 mipi_ctrl;

	u16 mipi_ii_ctrl;

	u16 padding;

	u32 line_time;

	u16 max_fps;

	u16 ae_usg;

	u32 ae_upper_et;

	u32 ae_max_et;

	u16 ss;

	u16 s1_sensor_mode;

	u16 hinf_ctrl;

	u32 reserved;

};

struct ap1302_res_struct {

	u16 width;

	u16 height;

	u16 fps;

};

struct ap1302_context_res {

	u32 res_num;

	u32 cur_res;

	struct ap1302_res_struct *res_table;

};

struct ap1302_device {

	struct v4l2_subdev sd;

	struct media_pad pad;

	struct camera_sensor_platform_data *platform_data;

	const struct firmware *fw;

	struct mutex input_lock; /* serialize sensor's ioctl */

	struct v4l2_mbus_framefmt format;

	struct v4l2_ctrl_handler ctrl_handler;

	struct v4l2_ctrl *run_mode;

	struct ap1302_context_config cntx_config[CONTEXT_NUM];

	struct ap1302_context_res cntx_res[CONTEXT_NUM];

	enum ap1302_contexts cur_context;

	unsigned int num_lanes;

	struct regmap *regmap16;

	struct regmap *regmap32;

	bool sys_activated;

	bool power_on;

};

struct ap1302_firmware {

	u32 crc;

	u32 pll_init_size;

	u32 total_size;

	u32 reserved;

};

struct ap1302_context_info {

	u16 offset;

	u16 len;

	char *name;

};

#endif