Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit d3da93d4 authored by Marcus Cooper's avatar Marcus Cooper Committed by Maxime Ripard
Browse files

ARM: sun6i: dt: Add new Mele I7 device 

The Mele I7 is a Allwinner A31 based Android TV box, with 1G RAM,
8GB NAND flash, a RTL8188etv wifi chip, 3 USB Host ports using
USB-A receptacles, a micro USB-B receptacle for USB OTG, HDMI out,
a TRS connector for A/V, SPDIF and IrDA.

This patch adds basic support for the device, more information can
be found here (http://linux-sunxi.org/Mele_I7

).

Signed-off-by: default avatarMarcus Cooper <codekipper@gmail.com>
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
parent 1e9d5530

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -546,6 +546,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \ 
	sun6i-a31-app4-evb1.dtb \

	sun6i-a31-colombus.dtb \

	sun6i-a31-hummingbird.dtb \

	sun6i-a31-i7.dtb \

	sun6i-a31-m9.dtb \

	sun6i-a31s-cs908.dtb

dtb-$(CONFIG_MACH_SUN7I) += \

arch/arm/boot/dts/sun6i-a31-i7.dts

0 → 100644
+150 −0
Original line number Diff line number Diff line 
/*

 * Copyright 2015 Marcus Cooper <codekipper@gmail.com>

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This file is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License as

 *     published by the Free Software Foundation; either version 2 of the

 *     License, or (at your option) any later version.

 *

 *     This file is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 *     You should have received a copy of the GNU General Public

 *     License along with this file; if not, write to the Free

 *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,

 *     MA 02110-1301 USA

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */



/dts-v1/;

#include "sun6i-a31.dtsi"

#include "sunxi-common-regulators.dtsi"



#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/pinctrl/sun4i-a10.h>



/ {

	model = "Mele I7 Quad top set box";

	compatible = "mele,i7", "allwinner,sun6i-a31";



	chosen {

		bootargs = "console=ttyS0,115200";

	};



	leds {

		compatible = "gpio-leds";

		pinctrl-names = "default";

		pinctrl-0 = <&led_pins_i7>;



		blue {

			label = "i7:blue:usr";

			gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;

		};

	};

};



&ehci0 {

	status = "okay";

};



&ehci1 {

	status = "okay";

};



&gmac {

	pinctrl-names = "default";

	pinctrl-0 = <&gmac_pins_mii_a>;

	phy = <&phy1>;

	phy-mode = "mii";

	status = "okay";



	phy1: ethernet-phy@1 {

		reg = <1>;

	};

};



&ir {

	pinctrl-names = "default";

	pinctrl-0 = <&ir_pins_a>;

	status = "okay";

};



&mmc0 {

	pinctrl-names = "default";

	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_i7>;

	vmmc-supply = <&reg_vcc3v3>;

	bus-width = <4>;

	cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */

	cd-inverted;

	status = "okay";

};



&pio {

	led_pins_i7: led_pins@0 {

		allwinner,pins = "PH13";

		allwinner,function = "gpio_out";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

	};



	mmc0_cd_pin_i7: mmc0_cd_pin@0 {

		allwinner,pins = "PH22";

		allwinner,function = "gpio_in";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;

	};



	usb1_vbus_pin_i7: usb1_vbus_pin@0 {

		allwinner,pins = "PC27";

		allwinner,function = "gpio_out";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

	};

};



&reg_usb1_vbus {

	pinctrl-names = "default";

	pinctrl-0 = <&usb1_vbus_pin_i7>;

	gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;

	status = "okay";

};



&uart0 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart0_pins_a>;

	status = "okay";

};



&usbphy {

	usb1_vbus-supply = <&reg_usb1_vbus>;

	status = "okay";

};