Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit ce879b64 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Pull more pin control fixes from Linus Walleij:
 "Some late arriving fixes. I should have sent earlier, just swamped
  with work as usual. Thomas patch makes AMD systems usable despite
  firmware bugs so it is fairly important.

   - Make the AMD driver use a regular interrupt rather than a chained
     one, so the system does not lock up.

   - Fix a function call error deep inside the STM32 driver"

* tag 'pinctrl-v4.12-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: stm32: Fix bad function call
  pinctrl/amd: Use regular interrupt instead of chained
parents db1b5ccd b7c747d4
Loading
Loading
Loading
Loading
+41 −50
Original line number Diff line number Diff line
@@ -495,64 +495,54 @@ static struct irq_chip amd_gpio_irqchip = {
	.flags        = IRQCHIP_SKIP_SET_WAKE,
};

static void amd_gpio_irq_handler(struct irq_desc *desc)
#define PIN_IRQ_PENDING	(BIT(INTERRUPT_STS_OFF) | BIT(WAKE_STS_OFF))

static irqreturn_t amd_gpio_irq_handler(int irq, void *dev_id)
{
	u32 i;
	u32 off;
	u32 reg;
	u32 pin_reg;
	u64 reg64;
	int handled = 0;
	unsigned int irq;
	struct amd_gpio *gpio_dev = dev_id;
	struct gpio_chip *gc = &gpio_dev->gc;
	irqreturn_t ret = IRQ_NONE;
	unsigned int i, irqnr;
	unsigned long flags;
	struct irq_chip *chip = irq_desc_get_chip(desc);
	struct gpio_chip *gc = irq_desc_get_handler_data(desc);
	struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
	u32 *regs, regval;
	u64 status, mask;

	chained_irq_enter(chip, desc);
	/*enable GPIO interrupt again*/
	/* Read the wake status */
	raw_spin_lock_irqsave(&gpio_dev->lock, flags);
	reg = readl(gpio_dev->base + WAKE_INT_STATUS_REG1);
	reg64 = reg;
	reg64 = reg64 << 32;

	reg = readl(gpio_dev->base + WAKE_INT_STATUS_REG0);
	reg64 |= reg;
	status = readl(gpio_dev->base + WAKE_INT_STATUS_REG1);
	status <<= 32;
	status |= readl(gpio_dev->base + WAKE_INT_STATUS_REG0);
	raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);

	/*
	 * first 46 bits indicates interrupt status.
	 * one bit represents four interrupt sources.
	*/
	for (off = 0; off < 46 ; off++) {
		if (reg64 & BIT(off)) {
	/* Bit 0-45 contain the relevant status bits */
	status &= (1ULL << 46) - 1;
	regs = gpio_dev->base;
	for (mask = 1, irqnr = 0; status; mask <<= 1, regs += 4, irqnr += 4) {
		if (!(status & mask))
			continue;
		status &= ~mask;

		/* Each status bit covers four pins */
		for (i = 0; i < 4; i++) {
				pin_reg = readl(gpio_dev->base +
						(off * 4 + i) * 4);
				if ((pin_reg & BIT(INTERRUPT_STS_OFF)) ||
					(pin_reg & BIT(WAKE_STS_OFF))) {
					irq = irq_find_mapping(gc->irqdomain,
								off * 4 + i);
			regval = readl(regs + i);
			if (!(regval & PIN_IRQ_PENDING))
				continue;
			irq = irq_find_mapping(gc->irqdomain, irqnr + i);
			generic_handle_irq(irq);
					writel(pin_reg,
						gpio_dev->base
						+ (off * 4 + i) * 4);
					handled++;
				}
			/* Clear interrupt */
			writel(regval, regs + i);
			ret = IRQ_HANDLED;
		}
	}
	}

	if (handled == 0)
		handle_bad_irq(desc);

	/* Signal EOI to the GPIO unit */
	raw_spin_lock_irqsave(&gpio_dev->lock, flags);
	reg = readl(gpio_dev->base + WAKE_INT_MASTER_REG);
	reg |= EOI_MASK;
	writel(reg, gpio_dev->base + WAKE_INT_MASTER_REG);
	regval = readl(gpio_dev->base + WAKE_INT_MASTER_REG);
	regval |= EOI_MASK;
	writel(regval, gpio_dev->base + WAKE_INT_MASTER_REG);
	raw_spin_unlock_irqrestore(&gpio_dev->lock, flags);

	chained_irq_exit(chip, desc);
	return ret;
}

static int amd_get_groups_count(struct pinctrl_dev *pctldev)
@@ -821,10 +811,11 @@ static int amd_gpio_probe(struct platform_device *pdev)
		goto out2;
	}

	gpiochip_set_chained_irqchip(&gpio_dev->gc,
				 &amd_gpio_irqchip,
				 irq_base,
				 amd_gpio_irq_handler);
	ret = devm_request_irq(&pdev->dev, irq_base, amd_gpio_irq_handler, 0,
			       KBUILD_MODNAME, gpio_dev);
	if (ret)
		goto out2;

	platform_set_drvdata(pdev, gpio_dev);

	dev_dbg(&pdev->dev, "amd gpio driver loaded\n");
+1 −1
Original line number Diff line number Diff line
@@ -798,7 +798,7 @@ static int stm32_pconf_parse_conf(struct pinctrl_dev *pctldev,
		break;
	case PIN_CONFIG_OUTPUT:
		__stm32_gpio_set(bank, offset, arg);
		ret = stm32_pmx_gpio_set_direction(pctldev, NULL, pin, false);
		ret = stm32_pmx_gpio_set_direction(pctldev, range, pin, false);
		break;
	default:
		ret = -EINVAL;