Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit ccf68e59 authored by sonic zhang's avatar sonic zhang Committed by Greg Kroah-Hartman
Browse files

serial: fit blackfin uart over sport driver into common uart infrastructure 



Fit blackfin uart over sport driver into common uart inftrastructure.  It
is based on the early platform interfaces to get the platform data early
when the console is initilized.

1. Enable sport uart driver to change uart baud, data bit, stop bit at
   runtime.  Bind the index of uart device nodes to physical index of
   sports.

2. Move all platform data into arch specific board files.  Register
   and probe platform device data in both early and normal stages.

3. Console is registered in sport uart driver as well.

4. Remove 500 us block waiting in sport tx stop code by putting a
   dummy data into tx fifo to make sure the sport tx stops when all bytes
   are shifted out except for the dummy data.

5. clean up a bit and fix up coding style.

Signed-off-by: default avatarSonic Zhang <sonic.zhang@analog.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Bryan Wu <cooloney@kernel.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 13dda80e

drivers/serial/Kconfig

+24 −28
Original line number Diff line number Diff line
@@ -1418,38 +1418,34 @@ config SERIAL_BFIN_SPORT 
	  To compile this driver as a module, choose M here: the

	  module will be called bfin_sport_uart.



choice

	prompt "Baud rate for Blackfin SPORT UART"

	depends on SERIAL_BFIN_SPORT

	default SERIAL_SPORT_BAUD_RATE_57600

	help

	  Choose a baud rate for the SPORT UART, other uart settings are

	  8 bit, 1 stop bit, no parity, no flow control.



config SERIAL_SPORT_BAUD_RATE_115200

	bool "115200"



config SERIAL_SPORT_BAUD_RATE_57600

	bool "57600"

config SERIAL_BFIN_SPORT_CONSOLE

	bool "Console on Blackfin sport emulated uart"

	depends on SERIAL_BFIN_SPORT=y

	select SERIAL_CORE_CONSOLE



config SERIAL_SPORT_BAUD_RATE_38400

	bool "38400"

config SERIAL_BFIN_SPORT0_UART

	bool "Enable UART over SPORT0"

	depends on SERIAL_BFIN_SPORT && !(BF542 || BF542M || BF544 || BF544M)

	help

	  Enable UART over SPORT0



config SERIAL_SPORT_BAUD_RATE_19200

	bool "19200"

config SERIAL_BFIN_SPORT1_UART

	bool "Enable UART over SPORT1"

	depends on SERIAL_BFIN_SPORT

	help

	  Enable UART over SPORT1



config SERIAL_SPORT_BAUD_RATE_9600

	bool "9600"

endchoice

config SERIAL_BFIN_SPORT2_UART

	bool "Enable UART over SPORT2"

	depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)

	help

	  Enable UART over SPORT2



config SPORT_BAUD_RATE

	int

	depends on SERIAL_BFIN_SPORT

	default 115200 if (SERIAL_SPORT_BAUD_RATE_115200)

	default 57600 if (SERIAL_SPORT_BAUD_RATE_57600)

	default 38400 if (SERIAL_SPORT_BAUD_RATE_38400)

	default 19200 if (SERIAL_SPORT_BAUD_RATE_19200)

	default 9600 if (SERIAL_SPORT_BAUD_RATE_9600)

config SERIAL_BFIN_SPORT3_UART

	bool "Enable UART over SPORT3"

	depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)

	help

	  Enable UART over SPORT3



config SERIAL_TIMBERDALE

	tristate "Support for timberdale UART"