Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit c7ab7330 authored by Ondrej Zary's avatar Ondrej Zary Committed by Marcel Holtmann
Browse files

Bluetooth: bluecard: blink LED during continuous activity 



Currently the activity LED is solid on during continuous activity.
Blink the LED during continuous activity to match Windows driver
behavior.

Cards with activity LED:
power LED = solid on when up, off when down
activity LED = blinking during activity, off when idle

Cards without activity LED:
power LED = solid on when up, off when down, blinking during activity
(don't have such a card so I don't know if Windows driver does the same
thing)

Signed-off-by: default avatarOndrej Zary <linux@rainbow-software.org>
Signed-off-by: default avatarMarcel Holtmann <marcel@holtmann.org>
parent 859d2351

drivers/bluetooth/bluecard_cs.c

+19 −14
Original line number Diff line number Diff line
@@ -93,6 +93,7 @@ static void bluecard_detach(struct pcmcia_device *p_dev); 


/* Hardware states */

#define CARD_READY             1

#define CARD_ACTIVITY	       2

#define CARD_HAS_PCCARD_ID     4

#define CARD_HAS_POWER_LED     5

#define CARD_HAS_ACTIVITY_LED  6
@@ -160,13 +161,14 @@ static void bluecard_activity_led_timeout(u_long arg) 
	struct bluecard_info *info = (struct bluecard_info *)arg;

	unsigned int iobase = info->p_dev->resource[0]->start;



	if (test_bit(CARD_HAS_ACTIVITY_LED, &(info->hw_state))) {

		/* Disable activity LED, keep power LED enabled */

		outb(0x08 | 0x20, iobase + 0x30);

	} else {

		/* Disable power LED */

		outb(0x00, iobase + 0x30);

	if (test_bit(CARD_ACTIVITY, &(info->hw_state))) {

		/* leave LED in inactive state for HZ/10 for blink effect */

		clear_bit(CARD_ACTIVITY, &(info->hw_state));

		mod_timer(&(info->timer), jiffies + HZ / 10);

	}



	/* Disable activity LED, enable power LED */

	outb(0x08 | 0x20, iobase + 0x30);

}
@@ -174,19 +176,22 @@ static void bluecard_enable_activity_led(struct bluecard_info *info) 
{

	unsigned int iobase = info->p_dev->resource[0]->start;



	/* don't disturb running blink timer */

	if (timer_pending(&(info->timer)))

		return;



	set_bit(CARD_ACTIVITY, &(info->hw_state));



	if (test_bit(CARD_HAS_ACTIVITY_LED, &(info->hw_state))) {

		/* Enable activity LED, keep power LED enabled */

		outb(0x18 | 0x60, iobase + 0x30);



		/* Stop the LED after HZ/4 */

		mod_timer(&(info->timer), jiffies + HZ / 4);

	} else {

		/* Enable power LED */

		outb(0x08 | 0x20, iobase + 0x30);



		/* Stop the LED after HZ/2 */

		mod_timer(&(info->timer), jiffies + HZ / 2);

		/* Disable power LED */

		outb(0x00, iobase + 0x30);

	}



	/* Stop the LED after HZ/10 */

	mod_timer(&(info->timer), jiffies + HZ / 10);

}