usb: dwc3: update documentation (bfad65ee) · Commits · e / devices / android_kernel_oneplus_sm7250

drivers/usb/dwc3/core.h

+24 −20

Original line number	Diff line number	Diff line
		/**
		/*
		* core.h - DesignWare USB3 DRD Core Header
		*
		* Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
		@@ -523,7 +523,6 @@ struct dwc3_event_buffer {
		* @trb_pool_dma: dma address of @trb_pool
		* @trb_enqueue: enqueue 'pointer' into TRB array
		* @trb_dequeue: dequeue 'pointer' into TRB array
		* @desc: usb_endpoint_descriptor pointer
		* @dwc: pointer to DWC controller
		* @saved_state: ep state saved during hibernation
		* @flags: endpoint flags (wedged, stalled, ...)
		@@ -665,7 +664,7 @@ enum dwc3_link_state {
		* @bpl: DW0-3
		* @bph: DW4-7
		* @size: DW8-B
		* @trl: DWC-F
		* @ctrl: DWC-F
		*/
		struct dwc3_trb {
		u32 bpl;
		@@ -675,16 +674,16 @@ struct dwc3_trb {
		} __packed;

		/**
		* dwc3_hwparams - copy of HWPARAMS registers
		* @hwparams0 - GHWPARAMS0
		* @hwparams1 - GHWPARAMS1
		* @hwparams2 - GHWPARAMS2
		* @hwparams3 - GHWPARAMS3
		* @hwparams4 - GHWPARAMS4
		* @hwparams5 - GHWPARAMS5
		* @hwparams6 - GHWPARAMS6
		* @hwparams7 - GHWPARAMS7
		* @hwparams8 - GHWPARAMS8
		* struct dwc3_hwparams - copy of HWPARAMS registers
		* @hwparams0: GHWPARAMS0
		* @hwparams1: GHWPARAMS1
		* @hwparams2: GHWPARAMS2
		* @hwparams3: GHWPARAMS3
		* @hwparams4: GHWPARAMS4
		* @hwparams5: GHWPARAMS5
		* @hwparams6: GHWPARAMS6
		* @hwparams7: GHWPARAMS7
		* @hwparams8: GHWPARAMS8
		*/
		struct dwc3_hwparams {
		u32 hwparams0;
		@@ -731,7 +730,8 @@ struct dwc3_hwparams {
		* @unaligned: true for OUT endpoints with length not divisible by maxp
		* @direction: IN or OUT direction flag
		* @mapped: true when request has been dma-mapped
		* @queued: true when request has been queued to HW
		* @started: request is started
		* @zero: wants a ZLP
		*/
		struct dwc3_request {
		struct usb_request request;
		@@ -762,17 +762,23 @@ struct dwc3_scratchpad_array {

		/**
		* struct dwc3 - representation of our controller
		* @drd_work - workqueue used for role swapping
		* @drd_work: workqueue used for role swapping
		* @ep0_trb: trb which is used for the ctrl_req
		* @bounce: address of bounce buffer
		* @scratchbuf: address of scratch buffer
		* @setup_buf: used while precessing STD USB requests
		* @ep0_trb: dma address of ep0_trb
		* @ep0_trb_addr: dma address of @ep0_trb
		* @bounce_addr: dma address of @bounce
		* @ep0_usb_req: dummy req used while handling STD USB requests
		* @scratch_addr: dma address of scratchbuf
		* @ep0_in_setup: one control transfer is completed and enter setup phase
		* @lock: for synchronizing
		* @dev: pointer to our struct device
		* @sysdev: pointer to the DMA-capable device
		* @xhci: pointer to our xHCI child
		* @event_buffer_list: a list of event buffers
		* @xhci_resources: struct resources for our @xhci child
		* @ev_buf: struct dwc3_event_buffer pointer
		* @eps: endpoint array
		* @gadget: device side representation of the peripheral controller
		* @gadget_driver: pointer to the gadget driver
		* @regs: base address for our registers
		@@ -796,8 +802,6 @@ struct dwc3_scratchpad_array {
		* @usb2_generic_phy: pointer to USB2 PHY
		* @usb3_generic_phy: pointer to USB3 PHY
		* @ulpi: pointer to ulpi interface
		* @dcfg: saved contents of DCFG register
		* @gctl: saved contents of GCTL register
		* @isoch_delay: wValue from Set Isochronous Delay request;
		* @u2sel: parameter from Set SEL request.
		* @u2pel: parameter from Set SEL request.
		@@ -831,7 +835,6 @@ struct dwc3_scratchpad_array {
		* @pending_events: true when we have pending IRQs to be handled
		* @pullups_connected: true when Run/Stop bit is set
		* @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround
		* @start_config_issued: true when StartConfig command has been issued
		* @three_stage_setup: set if we perform a three phase setup
		* @usb3_lpm_capable: set if hadrware supports Link Power Management
		* @disable_scramble_quirk: set if we enable the disable scramble quirk
		@@ -846,6 +849,7 @@ struct dwc3_scratchpad_array {
		* @dis_u2_susphy_quirk: set if we disable usb2 suspend phy
		* @dis_enblslpm_quirk: set if we clear enblslpm in GUSB2PHYCFG,
		* disabling the suspend signal to the PHY.
		* @dis_rxdet_inp3_quirk: set if we disable Rx.Detect in P3
		* @dis_u2_freeclk_exists_quirk : set if we clear u2_freeclk_exists
		* in GUSB2PHYCFG, specify that USB2 PHY doesn't
		* provide a free-running PHY clock.

drivers/usb/dwc3/ep0.c

+1 −1

Original line number	Diff line number	Diff line
		/**
		/*
		* ep0.c - DesignWare USB3 DRD Controller Endpoint 0 Handling
		*
		* Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com

drivers/usb/dwc3/gadget.c

+81 −40

Original line number	Diff line number	Diff line
		/**
		/*
		* gadget.c - DesignWare USB3 DRD Controller Gadget Framework Link
		*
		* Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
		@@ -36,13 +36,12 @@
		#include "io.h"

		/**
		* dwc3_gadget_set_test_mode - Enables USB2 Test Modes
		* dwc3_gadget_set_test_mode - enables usb2 test modes
		* @dwc: pointer to our context structure
		* @mode: the mode to set (J, K SE0 NAK, Force Enable)
		*
		* Caller should take care of locking. This function will
		* return 0 on success or -EINVAL if wrong Test Selector
		* is passed
		* Caller should take care of locking. This function will return 0 on
		* success or -EINVAL if wrong Test Selector is passed.
		*/
		int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode)
		{
		@@ -69,7 +68,7 @@ int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode)
		}

		/**
		* dwc3_gadget_get_link_state - Gets current state of USB Link
		* dwc3_gadget_get_link_state - gets current state of usb link
		* @dwc: pointer to our context structure
		*
		* Caller should take care of locking. This function will
		@@ -85,7 +84,7 @@ int dwc3_gadget_get_link_state(struct dwc3 *dwc)
		}

		/**
		* dwc3_gadget_set_link_state - Sets USB Link to a particular State
		* dwc3_gadget_set_link_state - sets usb link to a particular state
		* @dwc: pointer to our context structure
		* @state: the state to put link into
		*
		@@ -143,8 +142,8 @@ int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state)
		}

		/**
		* dwc3_ep_inc_trb() - Increment a TRB index.
		* @index - Pointer to the TRB index to increment.
		* dwc3_ep_inc_trb - increment a trb index.
		* @index: Pointer to the TRB index to increment.
		*
		* The index should never point to the link TRB. After incrementing,
		* if it is point to the link TRB, wrap around to the beginning. The
		@@ -157,16 +156,34 @@ static void dwc3_ep_inc_trb(u8 *index)
		*index = 0;
		}

		/**
		* dwc3_ep_inc_enq - increment endpoint's enqueue pointer
		* @dep: The endpoint whose enqueue pointer we're incrementing
		*/
		static void dwc3_ep_inc_enq(struct dwc3_ep *dep)
		{
		dwc3_ep_inc_trb(&dep->trb_enqueue);
		}

		/**
		* dwc3_ep_inc_deq - increment endpoint's dequeue pointer
		* @dep: The endpoint whose enqueue pointer we're incrementing
		*/
		static void dwc3_ep_inc_deq(struct dwc3_ep *dep)
		{
		dwc3_ep_inc_trb(&dep->trb_dequeue);
		}

		/**
		* dwc3_gadget_giveback - call struct usb_request's ->complete callback
		* @dep: The endpoint to whom the request belongs to
		* @req: The request we're giving back
		* @status: completion code for the request
		*
		* Must be called with controller's lock held and interrupts disabled. This
		* function will unmap @req and call its ->complete() callback to notify upper
		* layers that it has completed.
		*/
		void dwc3_gadget_giveback(struct dwc3_ep dep, struct dwc3_request req,
		int status)
		{
		@@ -193,6 +210,15 @@ void dwc3_gadget_giveback(struct dwc3_ep dep, struct dwc3_request req,
		pm_runtime_put(dwc->dev);
		}

		/**
		* dwc3_send_gadget_generic_command - issue a generic command for the controller
		* @dwc: pointer to the controller context
		* @cmd: the command to be issued
		* @param: command parameter
		*
		* Caller should take care of locking. Issue @cmd with a given @param to @dwc
		* and wait for its completion.
		*/
		int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned cmd, u32 param)
		{
		u32 timeout = 500;
		@@ -225,6 +251,15 @@ int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned cmd, u32 param)

		static int __dwc3_gadget_wakeup(struct dwc3 *dwc);

		/**
		* dwc3_send_gadget_ep_cmd - issue an endpoint command
		* @dep: the endpoint to which the command is going to be issued
		* @cmd: the command to be issued
		* @params: parameters to the command
		*
		* Caller should handle locking. This function will issue @cmd with given
		* @params to @dep and wait for its completion.
		*/
		int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned cmd,
		struct dwc3_gadget_ep_cmd_params *params)
		{
		@@ -422,36 +457,38 @@ static void dwc3_free_trb_pool(struct dwc3_ep *dep)
		static int dwc3_gadget_set_xfer_resource(struct dwc3 dwc, struct dwc3_ep dep);

		/**
		* dwc3_gadget_start_config - Configure EP resources
		* dwc3_gadget_start_config - configure ep resources
		* @dwc: pointer to our controller context structure
		* @dep: endpoint that is being enabled
		*
		* The assignment of transfer resources cannot perfectly follow the
		* data book due to the fact that the controller driver does not have
		* all knowledge of the configuration in advance. It is given this
		* information piecemeal by the composite gadget framework after every
		* SET_CONFIGURATION and SET_INTERFACE. Trying to follow the databook
		* programming model in this scenario can cause errors. For two
		* reasons:
		* Issue a %DWC3_DEPCMD_DEPSTARTCFG command to @dep. After the command's
		* completion, it will set Transfer Resource for all available endpoints.
		*
		* The assignment of transfer resources cannot perfectly follow the data book
		* due to the fact that the controller driver does not have all knowledge of the
		* configuration in advance. It is given this information piecemeal by the
		* composite gadget framework after every SET_CONFIGURATION and
		* SET_INTERFACE. Trying to follow the databook programming model in this
		* scenario can cause errors. For two reasons:
		*
		* 1) The databook says to do DEPSTARTCFG for every SET_CONFIGURATION
		* and SET_INTERFACE (8.1.5). This is incorrect in the scenario of
		* multiple interfaces.
		* 1) The databook says to do %DWC3_DEPCMD_DEPSTARTCFG for every
		* %USB_REQ_SET_CONFIGURATION and %USB_REQ_SET_INTERFACE (8.1.5). This is
		* incorrect in the scenario of multiple interfaces.
		*
		* 2) The databook does not mention doing more DEPXFERCFG for new
		* 2) The databook does not mention doing more %DWC3_DEPCMD_DEPXFERCFG for new
		* endpoint on alt setting (8.1.6).
		*
		* The following simplified method is used instead:
		*
		* All hardware endpoints can be assigned a transfer resource and this
		* setting will stay persistent until either a core reset or
		* hibernation. So whenever we do a DEPSTARTCFG(0) we can go ahead and
		* do DEPXFERCFG for every hardware endpoint as well. We are
		* All hardware endpoints can be assigned a transfer resource and this setting
		* will stay persistent until either a core reset or hibernation. So whenever we
		* do a %DWC3_DEPCMD_DEPSTARTCFG(0) we can go ahead and do
		* %DWC3_DEPCMD_DEPXFERCFG for every hardware endpoint as well. We are
		* guaranteed that there are as many transfer resources as endpoints.
		*
		* This function is called for each endpoint when it is being enabled
		* but is triggered only when called for EP0-out, which always happens
		* first, and which should only happen in one of the above conditions.
		* This function is called for each endpoint when it is being enabled but is
		* triggered only when called for EP0-out, which always happens first, and which
		* should only happen in one of the above conditions.
		*/
		static int dwc3_gadget_start_config(struct dwc3 dwc, struct dwc3_ep dep)
		{
		@@ -569,11 +606,13 @@ static int dwc3_gadget_set_xfer_resource(struct dwc3 dwc, struct dwc3_ep dep)
		}

		/**
		* __dwc3_gadget_ep_enable - Initializes a HW endpoint
		* __dwc3_gadget_ep_enable - initializes a hw endpoint
		* @dep: endpoint to be initialized
		* @desc: USB Endpoint Descriptor
		* @modify: if true, modify existing endpoint configuration
		* @restore: if true, restore endpoint configuration from scratch buffer
		*
		* Caller should take care of locking
		* Caller should take care of locking. Execute all necessary commands to
		* initialize a HW endpoint so it can be used by a gadget driver.
		*/
		static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
		bool modify, bool restore)
		@@ -685,11 +724,13 @@ static void dwc3_remove_requests(struct dwc3 dwc, struct dwc3_ep dep)
		}

		/**
		* __dwc3_gadget_ep_disable - Disables a HW endpoint
		* __dwc3_gadget_ep_disable - disables a hw endpoint
		* @dep: the endpoint to disable
		*
		* This function also removes requests which are currently processed ny the
		* hardware and those which are not yet scheduled.
		* This function undoes what __dwc3_gadget_ep_enable did and also removes
		* requests which are currently being processed by the hardware and those which
		* are not yet scheduled.
		*
		* Caller should take care of locking.
		*/
		static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
		@@ -932,7 +973,7 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep,
		}

		/**
		* dwc3_ep_prev_trb() - Returns the previous TRB in the ring
		* dwc3_ep_prev_trb - returns the previous TRB in the ring
		* @dep: The endpoint with the TRB ring
		* @index: The index of the current TRB in the ring
		*
		@@ -1729,8 +1770,8 @@ static irqreturn_t dwc3_interrupt(int irq, void *_dwc);
		static irqreturn_t dwc3_thread_interrupt(int irq, void *_dwc);

		/**
		* dwc3_gadget_setup_nump - Calculate and initialize NUMP field of DCFG
		* dwc: pointer to our context structure
		* dwc3_gadget_setup_nump - calculate and initialize NUMP field of %DWC3_DCFG
		* @dwc: pointer to our context structure
		*
		* The following looks like complex but it's actually very simple. In order to
		* calculate the number of packets we can burst at once on OUT transfers, we're
		@@ -1789,7 +1830,7 @@ static int __dwc3_gadget_start(struct dwc3 *dwc)
		reg = dwc3_readl(dwc->regs, DWC3_DCFG);
		reg &= ~(DWC3_DCFG_SPEED_MASK);

		/**
		/*
		* WORKAROUND: DWC3 revision < 2.20a have an issue
		* which would cause metastability state on Run/Stop
		* bit if we try to force the IP to USB2-only mode.
		@@ -2859,7 +2900,7 @@ static void dwc3_gadget_hibernation_interrupt(struct dwc3 *dwc,
		{
		unsigned int is_ss = evtinfo & BIT(4);

		/**
		/*
		* WORKAROUND: DWC3 revison 2.20a with hibernation support
		* have a known issue which can cause USB CV TD.9.23 to fail
		* randomly.
		@@ -3089,7 +3130,7 @@ static int dwc3_gadget_get_irq(struct dwc3 *dwc)
		}

		/**
		* dwc3_gadget_init - Initializes gadget related registers
		* dwc3_gadget_init - initializes gadget related registers
		* @dwc: pointer to our controller context structure
		*
		* Returns 0 on success otherwise negative errno.

drivers/usb/dwc3/gadget.h

+18 −4

Original line number	Diff line number	Diff line
		/**
		/*
		* gadget.h - DesignWare USB3 DRD Gadget Header
		*
		* Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com
		@@ -60,11 +60,25 @@ struct dwc3;

		#define to_dwc3_request(r) (container_of(r, struct dwc3_request, request))

		/**
		* next_request - gets the next request on the given list
		* @list: the request list to operate on
		*
		* Caller should take care of locking. This function return %NULL or the first
		* request available on @list.
		*/
		static inline struct dwc3_request next_request(struct list_head list)
		{
		return list_first_entry_or_null(list, struct dwc3_request, list);
		}

		/**
		* dwc3_gadget_move_started_request - move @req to the started_list
		* @req: the request to be moved
		*
		* Caller should take care of locking. This function will move @req from its
		* current list to the endpoint's started_list.
		*/
		static inline void dwc3_gadget_move_started_request(struct dwc3_request *req)
		{
		struct dwc3_ep *dep = req->dep;
		@@ -87,10 +101,10 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol);

		/**
		* dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW
		* @dwc: DesignWare USB3 Pointer
		* @number: DWC endpoint number
		* @dep: dwc3 endpoint
		*
		* Caller should take care of locking
		* Caller should take care of locking. Returns the transfer resource
		* index for a given endpoint.
		*/
		static inline u32 dwc3_gadget_ep_get_transfer_index(struct dwc3_ep *dep)
		{