ide: make IDE_AFLAG_.. numbering continuous again

	/* ide-cd */

	/* Drive cannot eject the disc. */

	IDE_AFLAG_NO_EJECT		= (1 << 3),

	IDE_AFLAG_NO_EJECT		= (1 << 1),

	/* Drive is a pre ATAPI 1.2 drive. */

	IDE_AFLAG_PRE_ATAPI12		= (1 << 4),

	IDE_AFLAG_PRE_ATAPI12		= (1 << 2),

	/* TOC addresses are in BCD. */

	IDE_AFLAG_TOCADDR_AS_BCD	= (1 << 5),

	IDE_AFLAG_TOCADDR_AS_BCD	= (1 << 3),

	/* TOC track numbers are in BCD. */

	IDE_AFLAG_TOCTRACKS_AS_BCD	= (1 << 6),

	IDE_AFLAG_TOCTRACKS_AS_BCD	= (1 << 4),

	/*

	 * Drive does not provide data in multiples of SECTOR_SIZE

	 * when more than one interrupt is needed.

	 */

	IDE_AFLAG_LIMIT_NFRAMES		= (1 << 7),

	IDE_AFLAG_LIMIT_NFRAMES		= (1 << 5),

	/* Saved TOC information is current. */

	IDE_AFLAG_TOC_VALID		= (1 << 9),

	IDE_AFLAG_TOC_VALID		= (1 << 6),

	/* We think that the drive door is locked. */

	IDE_AFLAG_DOOR_LOCKED		= (1 << 10),

	IDE_AFLAG_DOOR_LOCKED		= (1 << 7),

	/* SET_CD_SPEED command is unsupported. */

	IDE_AFLAG_NO_SPEED_SELECT	= (1 << 11),

	IDE_AFLAG_VERTOS_300_SSD	= (1 << 12),

	IDE_AFLAG_VERTOS_600_ESD	= (1 << 13),

	IDE_AFLAG_SANYO_3CD		= (1 << 14),

	IDE_AFLAG_FULL_CAPS_PAGE	= (1 << 15),

	IDE_AFLAG_PLAY_AUDIO_OK		= (1 << 16),

	IDE_AFLAG_LE_SPEED_FIELDS	= (1 << 17),

	IDE_AFLAG_NO_SPEED_SELECT	= (1 << 8),

	IDE_AFLAG_VERTOS_300_SSD	= (1 << 9),

	IDE_AFLAG_VERTOS_600_ESD	= (1 << 10),

	IDE_AFLAG_SANYO_3CD		= (1 << 11),

	IDE_AFLAG_FULL_CAPS_PAGE	= (1 << 12),

	IDE_AFLAG_PLAY_AUDIO_OK		= (1 << 13),

	IDE_AFLAG_LE_SPEED_FIELDS	= (1 << 14),

	/* ide-floppy */

	/* Avoid commands not supported in Clik drive */

	IDE_AFLAG_CLIK_DRIVE		= (1 << 19),

	IDE_AFLAG_CLIK_DRIVE		= (1 << 15),

	/* Requires BH algorithm for packets */

	IDE_AFLAG_ZIP_DRIVE		= (1 << 20),

	IDE_AFLAG_ZIP_DRIVE		= (1 << 16),

	/* Supports format progress report */

	IDE_AFLAG_SRFP			= (1 << 22),

	IDE_AFLAG_SRFP			= (1 << 17),

	/* ide-tape */

	IDE_AFLAG_IGNORE_DSC		= (1 << 23),

	IDE_AFLAG_IGNORE_DSC		= (1 << 18),

	/* 0 When the tape position is unknown */

	IDE_AFLAG_ADDRESS_VALID		= (1 <<	24),

	IDE_AFLAG_ADDRESS_VALID		= (1 <<	19),

	/* Device already opened */

	IDE_AFLAG_BUSY			= (1 << 25),

	IDE_AFLAG_BUSY			= (1 << 20),

	/* Attempt to auto-detect the current user block size */

	IDE_AFLAG_DETECT_BS		= (1 << 26),

	IDE_AFLAG_DETECT_BS		= (1 << 21),

	/* Currently on a filemark */

	IDE_AFLAG_FILEMARK		= (1 << 27),

	IDE_AFLAG_FILEMARK		= (1 << 22),

	/* 0 = no tape is loaded, so we don't rewind after ejecting */

	IDE_AFLAG_MEDIUM_PRESENT	= (1 << 28),

	IDE_AFLAG_MEDIUM_PRESENT	= (1 << 23),

	IDE_AFLAG_NO_AUTOCLOSE		= (1 << 29),

	IDE_AFLAG_NO_AUTOCLOSE		= (1 << 24),

};

/* device flags */