Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit b96b3b22 authored by Maxime Ripard's avatar Maxime Ripard
Browse files

ARM: sun5i: a10s: olinuxino micro: Convert to DT label based syntax 



In order to lessen the amount of duplication of the DT tree, ease the
new and follow the trend that prefers to use label based references
when overriding DTSI nodes, convert the board to this syntax

Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
parent 5e877369

arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts

+157 −158
Original line number Diff line number Diff line
@@ -65,86 +65,56 @@ 
		serial2 = &uart3;

	};



	soc@01c00000 {

		emac: ethernet@01c0b000 {

	leds {

		compatible = "gpio-leds";

		pinctrl-names = "default";

			pinctrl-0 = <&emac_pins_a>;

			phy = <&phy1>;

			status = "okay";

		};



		mdio@01c0b080 {

			status = "okay";

		pinctrl-0 = <&led_pins_olinuxino>;



			phy1: ethernet-phy@1 {

				reg = <1>;

		green {

			label = "a10s-olinuxino-micro:green:usr";

			gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;

			default-state = "on";

		};

	};



		mmc0: mmc@01c0f000 {

			pinctrl-names = "default";

			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;

			vmmc-supply = <&reg_vcc3v3>;

			bus-width = <4>;

			cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */

			cd-inverted;

			status = "okay";

};



		mmc1: mmc@01c10000 {

			pinctrl-names = "default";

			pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;

			vmmc-supply = <&reg_vcc3v3>;

			bus-width = <4>;

			cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */

			cd-inverted;

&ehci0 {

	status = "okay";

};



		usbphy: phy@01c13400 {

			usb1_vbus-supply = <&reg_usb1_vbus>;

&emac {

	pinctrl-names = "default";

	pinctrl-0 = <&emac_pins_a>;

	phy = <&phy1>;

	status = "okay";

};



		ehci0: usb@01c14000 {

&i2c0 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c0_pins_a>;

	status = "okay";

};



		ohci0: usb@01c14400 {

&i2c1 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c1_pins_a>;

	status = "okay";

		};



		pinctrl@01c20800 {

			mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {

				allwinner,pins = "PG1";

				allwinner,function = "gpio_in";

				allwinner,drive = <SUN4I_PINCTRL_10_MA>;

				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;

	at24@50 {

		compatible = "at,24c16";

		pagesize = <16>;

		reg = <0x50>;

		read-only;

	};



			mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {

				allwinner,pins = "PG13";

				allwinner,function = "gpio_in";

				allwinner,drive = <SUN4I_PINCTRL_10_MA>;

				allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;

};



			led_pins_olinuxino: led_pins@0 {

				allwinner,pins = "PE3";

				allwinner,function = "gpio_out";

				allwinner,drive = <SUN4I_PINCTRL_20_MA>;

				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

			};



			usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {

				allwinner,pins = "PB10";

				allwinner,function = "gpio_out";

				allwinner,drive = <SUN4I_PINCTRL_10_MA>;

				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

			};

&i2c2 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c2_pins_a>;

	status = "okay";

};



		lradc: lradc@01c22800 {

&lradc {

	vref-supply = <&reg_vcc3v0>;

	status = "okay";
@@ -184,65 +154,94 @@ 
	};

};



		uart0: serial@01c28000 {

			pinctrl-names = "default";

			pinctrl-0 = <&uart0_pins_a>;

&mdio {

	status = "okay";



	phy1: ethernet-phy@1 {

		reg = <1>;

	};

};



		uart2: serial@01c28800 {

&mmc0 {

	pinctrl-names = "default";

			pinctrl-0 = <&uart2_pins_a>;

	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;

	vmmc-supply = <&reg_vcc3v3>;

	bus-width = <4>;

	cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */

	cd-inverted;

	status = "okay";

};



		uart3: serial@01c28c00 {

&mmc1 {

	pinctrl-names = "default";

			pinctrl-0 = <&uart3_pins_a>;

	pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;

	vmmc-supply = <&reg_vcc3v3>;

	bus-width = <4>;

	cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */

	cd-inverted;

	status = "okay";

};



		i2c0: i2c@01c2ac00 {

			pinctrl-names = "default";

			pinctrl-0 = <&i2c0_pins_a>;

&ohci0 {

	status = "okay";

};



		i2c1: i2c@01c2b000 {

			pinctrl-names = "default";

			pinctrl-0 = <&i2c1_pins_a>;

			status = "okay";

&pio {

	mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {

		allwinner,pins = "PG1";

		allwinner,function = "gpio_in";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;

	};



			at24@50 {

				compatible = "at,24c16";

				pagesize = <16>;

				reg = <0x50>;

				read-only;

	mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {

		allwinner,pins = "PG13";

		allwinner,function = "gpio_in";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;

	};



	led_pins_olinuxino: led_pins@0 {

		allwinner,pins = "PE3";

		allwinner,function = "gpio_out";

		allwinner,drive = <SUN4I_PINCTRL_20_MA>;

		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

	};



		i2c2: i2c@01c2b400 {

			pinctrl-names = "default";

			pinctrl-0 = <&i2c2_pins_a>;

			status = "okay";

	usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {

		allwinner,pins = "PB10";

		allwinner,function = "gpio_out";

		allwinner,drive = <SUN4I_PINCTRL_10_MA>;

		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

	};

};



	leds {

		compatible = "gpio-leds";

		pinctrl-names = "default";

		pinctrl-0 = <&led_pins_olinuxino>;

&reg_usb1_vbus {

	pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;

	gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;

	status = "okay";

};



		green {

			label = "a10s-olinuxino-micro:green:usr";

			gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;

			default-state = "on";

&uart0 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart0_pins_a>;

	status = "okay";

};



&uart2 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart2_pins_a>;

	status = "okay";

};



	reg_usb1_vbus: usb1-vbus {

		pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;

		gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;

&uart3 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart3_pins_a>;

	status = "okay";

};



&usbphy {

	usb1_vbus-supply = <&reg_usb1_vbus>;

	status = "okay";

};