Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit b690bdef authored by Krzysztof Halasa's avatar Krzysztof Halasa Committed by Jeff Garzik
Browse files

[PATCH] WAN: DSCC4 driver requires generic HDLC 



Another thing, reported recently to me by several people - DSCC4 WAN
driver now (and perhaps for the last couple of years+) requires the
generic HDLC. I've fixed the Kconfig and moved the DSCC4 option
under CONFIG_HDLC so it's consistent visually.

Signed-off-by: default avatarKrzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent 5e123b84

drivers/net/wan/Kconfig

+38 −38
Original line number Diff line number Diff line
@@ -57,44 +57,6 @@ config COSA 
	  The driver will be compiled as a module: the

	  module will be called cosa.



config DSCC4

	tristate "Etinc PCISYNC serial board support"

	depends on WAN && PCI && m

	help

	  Driver for Etinc PCISYNC boards based on the Infineon (ex. Siemens)

	  DSCC4 chipset.



	  This is supposed to work with the four port card. Take a look at

	  <http://www.cogenit.fr/dscc4/> for further information about the

	  driver.



	  To compile this driver as a module, choose M here: the

	  module will be called dscc4.



config DSCC4_PCISYNC

	bool "Etinc PCISYNC features"

	depends on DSCC4

	help

	  Due to Etinc's design choice for its PCISYNC cards, some operations

	  are only allowed on specific ports of the DSCC4. This option is the

	  only way for the driver to know that it shouldn't return a success

	  code for these operations.



	  Please say Y if your card is an Etinc's PCISYNC.



config DSCC4_PCI_RST

	bool "Hard reset support"

	depends on DSCC4

	help

	  Various DSCC4 bugs forbid any reliable software reset of the ASIC.

	  As a replacement, some vendors provide a way to assert the PCI #RST

	  pin of DSCC4 through the GPIO port of the card. If you choose Y,

	  the driver will make use of this feature before module removal

	  (i.e. rmmod). The feature is known to be available on Commtech's

	  cards. Contact your manufacturer for details.



	  Say Y if your card supports this feature.



#

# Lan Media's board. Currently 1000, 1200, 5200, 5245

#
@@ -323,6 +285,44 @@ config FARSYNC 
	  To compile this driver as a module, choose M here: the

	  module will be called farsync.



config DSCC4

	tristate "Etinc PCISYNC serial board support"

	depends on HDLC && PCI && m

	help

	  Driver for Etinc PCISYNC boards based on the Infineon (ex. Siemens)

	  DSCC4 chipset.



	  This is supposed to work with the four port card. Take a look at

	  <http://www.cogenit.fr/dscc4/> for further information about the

	  driver.



	  To compile this driver as a module, choose M here: the

	  module will be called dscc4.



config DSCC4_PCISYNC

	bool "Etinc PCISYNC features"

	depends on DSCC4

	help

	  Due to Etinc's design choice for its PCISYNC cards, some operations

	  are only allowed on specific ports of the DSCC4. This option is the

	  only way for the driver to know that it shouldn't return a success

	  code for these operations.



	  Please say Y if your card is an Etinc's PCISYNC.



config DSCC4_PCI_RST

	bool "Hard reset support"

	depends on DSCC4

	help

	  Various DSCC4 bugs forbid any reliable software reset of the ASIC.

	  As a replacement, some vendors provide a way to assert the PCI #RST

	  pin of DSCC4 through the GPIO port of the card. If you choose Y,

	  the driver will make use of this feature before module removal

	  (i.e. rmmod). The feature is known to be available on Commtech's

	  cards. Contact your manufacturer for details.



	  Say Y if your card supports this feature.



config DLCI

	tristate "Frame Relay DLCI support"

	depends on WAN