slip: Move the SLIP drivers (b5451d78) · Commits · e / devices / android_kernel_oneplus_sm7250

drivers/net/Kconfig

+2 −72

Original line number	Diff line number	Diff line
		@@ -199,6 +199,8 @@ source "drivers/net/fddi/Kconfig"

		source "drivers/net/plip/Kconfig"

		source "drivers/net/slip/Kconfig"

		source "drivers/net/tokenring/Kconfig"

		source "drivers/net/wireless/Kconfig"
		@@ -274,78 +276,6 @@ config RIONET_RX_SIZE
		depends on RIONET
		default "128"

		config SLIP
		tristate "SLIP (serial line) support"
		---help---
		Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
		connect to your Internet service provider or to connect to some
		other local Unix box or if you want to configure your Linux box as a
		Slip/CSlip server for other people to dial in. SLIP (Serial Line
		Internet Protocol) is a protocol used to send Internet traffic over
		serial connections such as telephone lines or null modem cables;
		nowadays, the protocol PPP is more commonly used for this same
		purpose.

		Normally, your access provider has to support SLIP in order for you
		to be able to use it, but there is now a SLIP emulator called SLiRP
		around (available from
		<ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
		allows you to use SLIP over a regular dial up shell connection. If
		you plan to use SLiRP, make sure to say Y to CSLIP, below. The
		NET-3-HOWTO, available from
		<http://www.tldp.org/docs.html#howto>, explains how to
		configure SLIP. Note that you don't need this option if you just
		want to run term (term is a program which gives you almost full
		Internet connectivity if you have a regular dial up shell account on
		some Internet connected Unix computer. Read
		<http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
		support will enlarge your kernel by about 4 KB. If unsure, say N.

		To compile this driver as a module, choose M here. The module
		will be called slip.

		config SLIP_COMPRESSED
		bool "CSLIP compressed headers"
		depends on SLIP
		select SLHC
		---help---
		This protocol is faster than SLIP because it uses compression on the
		TCP/IP headers (not on the data itself), but it has to be supported
		on both ends. Ask your access provider if you are not sure and
		answer Y, just in case. You will still be able to use plain SLIP. If
		you plan to use SLiRP, the SLIP emulator (available from
		<ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
		allows you to use SLIP over a regular dial up shell connection, you
		definitely want to say Y here. The NET-3-HOWTO, available from
		<http://www.tldp.org/docs.html#howto>, explains how to configure
		CSLIP. This won't enlarge your kernel.

		config SLHC
		tristate
		help
		This option enables Van Jacobsen serial line header compression
		routines.

		config SLIP_SMART
		bool "Keepalive and linefill"
		depends on SLIP
		help
		Adds additional capabilities to the SLIP driver to support the
		RELCOM line fill and keepalive monitoring. Ideal on poor quality
		analogue lines.

		config SLIP_MODE_SLIP6
		bool "Six bit SLIP encapsulation"
		depends on SLIP
		help
		Just occasionally you may need to run IP over hostile serial
		networks that don't pass all control characters or are only seven
		bit. Saying Y here adds an extra mode you can use with SLIP:
		"slip6". In this mode, SLIP will only send normal ASCII symbols over
		the serial device. Naturally, this has to be supported at the other
		end of the link as well. It's good enough, for example, to run IP
		over the async ports of a Camtec JNT Pad. If unsure, say N.

		config NET_FC
		bool "Fibre Channel driver support"
		depends on SCSI && PCI

drivers/net/Makefile

+2 −2

Original line number	Diff line number	Diff line
		@@ -20,8 +20,6 @@ obj-$(CONFIG_RIONET) += rionet.o

		obj-$(CONFIG_NET) += Space.o loopback.o
		obj-$(CONFIG_NET_SB1000) += sb1000.o
		obj-$(CONFIG_SLIP) += slip.o
		obj-$(CONFIG_SLHC) += slhc.o

		obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o
		obj-$(CONFIG_XEN_NETDEV_BACKEND) += xen-netback/
		@@ -48,6 +46,8 @@ obj-$(CONFIG_PPP_SYNC_TTY) += ppp/
		obj-$(CONFIG_PPPOE) += ppp/
		obj-$(CONFIG_PPPOL2TP) += ppp/
		obj-$(CONFIG_PPTP) += ppp/
		onj-$(CONFIG_SLIP) += slip/
		obj-$(CONFIG_SLHC) += slip/
		obj-$(CONFIG_TR) += tokenring/
		obj-$(CONFIG_WAN) += wan/
		obj-$(CONFIG_ARCNET) += arcnet/

drivers/net/slip/Kconfig

0 → 100644

+79 −0

Original line number	Diff line number	Diff line
		#
		# SLIP network device configuration
		#

		config SLIP
		tristate "SLIP (serial line) support"
		---help---
		Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to
		connect to your Internet service provider or to connect to some
		other local Unix box or if you want to configure your Linux box as a
		Slip/CSlip server for other people to dial in. SLIP (Serial Line
		Internet Protocol) is a protocol used to send Internet traffic over
		serial connections such as telephone lines or null modem cables;
		nowadays, the protocol PPP is more commonly used for this same
		purpose.

		Normally, your access provider has to support SLIP in order for you
		to be able to use it, but there is now a SLIP emulator called SLiRP
		around (available from
		<ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
		allows you to use SLIP over a regular dial up shell connection. If
		you plan to use SLiRP, make sure to say Y to CSLIP, below. The
		NET-3-HOWTO, available from
		<http://www.tldp.org/docs.html#howto>, explains how to
		configure SLIP. Note that you don't need this option if you just
		want to run term (term is a program which gives you almost full
		Internet connectivity if you have a regular dial up shell account on
		some Internet connected Unix computer. Read
		<http://www.bart.nl/~patrickr/term-howto/Term-HOWTO.html>). SLIP
		support will enlarge your kernel by about 4 KB. If unsure, say N.

		To compile this driver as a module, choose M here. The module
		will be called slip.

		config SLHC
		tristate
		---help---
		This option enables Van Jacobsen serial line header compression
		routines.

		if SLIP

		config SLIP_COMPRESSED
		bool "CSLIP compressed headers"
		depends on SLIP
		select SLHC
		---help---
		This protocol is faster than SLIP because it uses compression on the
		TCP/IP headers (not on the data itself), but it has to be supported
		on both ends. Ask your access provider if you are not sure and
		answer Y, just in case. You will still be able to use plain SLIP. If
		you plan to use SLiRP, the SLIP emulator (available from
		<ftp://ibiblio.org/pub/Linux/system/network/serial/>) which
		allows you to use SLIP over a regular dial up shell connection, you
		definitely want to say Y here. The NET-3-HOWTO, available from
		<http://www.tldp.org/docs.html#howto>, explains how to configure
		CSLIP. This won't enlarge your kernel.

		config SLIP_SMART
		bool "Keepalive and linefill"
		depends on SLIP
		---help---
		Adds additional capabilities to the SLIP driver to support the
		RELCOM line fill and keepalive monitoring. Ideal on poor quality
		analogue lines.

		config SLIP_MODE_SLIP6
		bool "Six bit SLIP encapsulation"
		depends on SLIP
		---help---
		Just occasionally you may need to run IP over hostile serial
		networks that don't pass all control characters or are only seven
		bit. Saying Y here adds an extra mode you can use with SLIP:
		"slip6". In this mode, SLIP will only send normal ASCII symbols over
		the serial device. Naturally, this has to be supported at the other
		end of the link as well. It's good enough, for example, to run IP
		over the async ports of a Camtec JNT Pad. If unsure, say N.

		endif # SLIP

drivers/net/slip/Makefile

0 → 100644

+6 −0

Original line number	Diff line number	Diff line
		#
		# Makefile for the SLIP network device drivers.
		#

		obj-$(CONFIG_SLIP) += slip.o
		obj-$(CONFIG_SLHC) += slhc.o

drivers/net/slhc.c→drivers/net/slip/slhc.c

+0 −0

File moved.

View file