ARM: Kirkwood: Convert IX2-200 to pinctrl. (a93d3ad2) · Commits · e / devices / android_kernel_oneplus_sm7250

arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts

+89 −0

Original line number	Diff line number	Diff line
		/dts-v1/;

		/include/ "kirkwood.dtsi"
		/include/ "kirkwood-6281.dtsi"

		/ {
		model = "Iomega StorCenter ix2-200";
		@@ -16,6 +17,94 @@
		};

		ocp@f1000000 {
		pinctrl: pinctrl@10000 {

		pinctrl-0 = < &pmx_button_reset &pmx_button_power
		&pmx_led_backup &pmx_led_power
		&pmx_button_otb &pmx_led_rebuild
		&pmx_led_health
		&pmx_led_sata_brt_ctrl_1
		&pmx_led_sata_brt_ctrl_2
		&pmx_led_backup_brt_ctrl_1
		&pmx_led_backup_brt_ctrl_2
		&pmx_led_power_brt_ctrl_1
		&pmx_led_power_brt_ctrl_2
		&pmx_led_health_brt_ctrl_1
		&pmx_led_health_brt_ctrl_2
		&pmx_led_rebuild_brt_ctrl_1
		&pmx_led_rebuild_brt_ctrl_2 >;
		pinctrl-names = "default";

		pmx_button_reset: pmx-button-reset {
		marvell,pins = "mpp12";
		marvell,function = "gpio";
		};
		pmx_button_power: pmx-button-power {
		marvell,pins = "mpp14";
		marvell,function = "gpio";
		};
		pmx_led_backup: pmx-led-backup {
		marvell,pins = "mpp15";
		marvell,function = "gpio";
		};
		pmx_led_power: pmx-led-power {
		marvell,pins = "mpp16";
		marvell,function = "gpio";
		};
		pmx_button_otb: pmx-button-otb {
		marvell,pins = "mpp35";
		marvell,function = "gpio";
		};
		pmx_led_rebuild: pmx-led-rebuild {
		marvell,pins = "mpp36";
		marvell,function = "gpio";
		};
		pmx_led_health: pmx-led_health {
		marvell,pins = "mpp37";
		marvell,function = "gpio";
		};
		pmx_led_sata_brt_ctrl_1: pmx-led-sata-brt-ctrl-1 {
		marvell,pins = "mpp38";
		marvell,function = "gpio";
		};
		pmx_led_sata_brt_ctrl_2: pmx-led-sata-brt-ctrl-2 {
		marvell,pins = "mpp39";
		marvell,function = "gpio";
		};
		pmx_led_backup_brt_ctrl_1: pmx-led-backup-brt-ctrl-1 {
		marvell,pins = "mpp40";
		marvell,function = "gpio";
		};
		pmx_led_backup_brt_ctrl_2: pmx-led-backup-brt-ctrl-2 {
		marvell,pins = "mpp41";
		marvell,function = "gpio";
		};
		pmx_led_power_brt_ctrl_1: pmx-led-power-brt-ctrl-1 {
		marvell,pins = "mpp42";
		marvell,function = "gpio";
		};
		pmx_led_power_brt_ctrl_2: pmx-led-power-brt-ctrl-2 {
		marvell,pins = "mpp43";
		marvell,function = "gpio";
		};
		pmx_led_health_brt_ctrl_1: pmx-led-health-brt-ctrl-1 {
		marvell,pins = "mpp44";
		marvell,function = "gpio";
		};
		pmx_led_health_brt_ctrl_2: pmx-led-health-brt-ctrl-2 {
		marvell,pins = "mpp45";
		marvell,function = "gpio";
		};
		pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 {
		marvell,pins = "mpp44";
		marvell,function = "gpio";
		};
		pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 {
		marvell,pins = "mpp45";
		marvell,function = "gpio";
		};

		};
		i2c@11000 {
		status = "okay";

arch/arm/mach-kirkwood/board-iomega_ix2_200.c

+0 −24

Original line number	Diff line number	Diff line
		@@ -15,7 +15,6 @@
		#include <linux/ethtool.h>
		#include <mach/kirkwood.h>
		#include "common.h"
		#include "mpp.h"

		static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
		.phy_addr = MV643XX_ETH_PHY_NONE,
		@@ -23,33 +22,10 @@ static struct mv643xx_eth_platform_data iomega_ix2_200_ge00_data = {
		.duplex = DUPLEX_FULL,
		};

		static unsigned int iomega_ix2_200_mpp_config[] __initdata = {
		MPP12_GPIO, /* Reset Button */
		MPP14_GPIO, /* Power Button */
		MPP15_GPIO, /* Backup LED (blue) */
		MPP16_GPIO, /* Power LED (white) */
		MPP35_GPIO, /* OTB Button */
		MPP36_GPIO, /* Rebuild LED (white) */
		MPP37_GPIO, /* Health LED (red) */
		MPP38_GPIO, /* SATA LED brightness control 1 */
		MPP39_GPIO, /* SATA LED brightness control 2 */
		MPP40_GPIO, /* Backup LED brightness control 1 */
		MPP41_GPIO, /* Backup LED brightness control 2 */
		MPP42_GPIO, /* Power LED brightness control 1 */
		MPP43_GPIO, /* Power LED brightness control 2 */
		MPP44_GPIO, /* Health LED brightness control 1 */
		MPP45_GPIO, /* Health LED brightness control 2 */
		MPP46_GPIO, /* Rebuild LED brightness control 1 */
		MPP47_GPIO, /* Rebuild LED brightness control 2 */
		0
		};

		void __init iomega_ix2_200_init(void)
		{
		/*
		* Basic setup. Needs to be called early.
		*/
		kirkwood_mpp_conf(iomega_ix2_200_mpp_config);

		kirkwood_ge01_init(&iomega_ix2_200_ge00_data);
		}