Merge "asoc: codecs: Add comparator autozeroing support for rouleur" (a715bed4) · Commits · e / devices / android_kernel_oneplus_sm7250

asoc/codecs/rouleur/rouleur-mbhc.c

+38 −21

Original line number	Diff line number	Diff line
		@@ -37,6 +37,10 @@
		#define ROULEUR_MBHC_ZDET_CONST (86 * 16384)
		#define ROULEUR_MBHC_MOISTURE_RREF R_24_KOHM

		/* Cross connection thresholds in mV */
		#define ROULEUR_HPHL_CROSS_CONN_THRESHOLD 200
		#define ROULEUR_HPHR_CROSS_CONN_THRESHOLD 200

		static struct wcd_mbhc_register
		wcd_mbhc_registers[WCD_MBHC_REG_FUNC_MAX] = {
		WCD_MBHC_REGISTER("WCD_MBHC_L_DET_EN",
		@@ -320,11 +324,11 @@ static void rouleur_mbhc_micb_ramp_control(struct snd_soc_component *component,
		0x1C, 0x0C);
		snd_soc_component_update_bits(component,
		ROULEUR_ANA_MBHC_MICB2_RAMP,
		0xA0, 0x80);
		0x80, 0x80);
		} else {
		snd_soc_component_update_bits(component,
		ROULEUR_ANA_MBHC_MICB2_RAMP,
		0xA0, 0x00);
		0x80, 0x00);
		snd_soc_component_update_bits(component,
		ROULEUR_ANA_MBHC_MICB2_RAMP,
		0x1C, 0x00);
		@@ -820,15 +824,6 @@ static void rouleur_mbhc_bcs_enable(struct wcd_mbhc *mbhc,
		rouleur_disable_bcs_before_slow_insert(mbhc->component, true);
		}

		static void rouleur_mbhc_hs_vref_max_update(struct wcd_mbhc *mbhc)
		{
		struct snd_soc_component *component = mbhc->component;

		/* Update the HS Vref max voltage to 1.7V */
		snd_soc_component_update_bits(component, ROULEUR_ANA_MBHC_CTL_2,
		0x03, 0x03);
		}

		static void rouleur_mbhc_get_micbias_val(struct wcd_mbhc mbhc, int mb)
		{
		u8 vout_ctl = 0;
		@@ -843,17 +838,38 @@ static void rouleur_mbhc_get_micbias_val(struct wcd_mbhc mbhc, int mb)
		pr_debug("%s: vout_ctl: %d, micbias: %d\n", __func__, vout_ctl, *mb);
		}

		static void rouleur_mbhc_micb_pullup_control(
		struct snd_soc_component *component,
		bool pullup_enable)
		static void rouleur_mbhc_comp_autozero_control(struct wcd_mbhc *mbhc,
		bool az_enable)
		{
		if (pullup_enable)
		rouleur_micbias_control(component, MIC_BIAS_2,
		MICB_PULLUP_ENABLE, false);
		if (az_enable)
		snd_soc_component_update_bits(mbhc->component,
		ROULEUR_ANA_MBHC_MCLK, 0x08, 0x08);
		else
		rouleur_micbias_control(component, MIC_BIAS_2,
		MICB_PULLUP_DISABLE, false);
		snd_soc_component_update_bits(mbhc->component,
		ROULEUR_ANA_MBHC_MCLK, 0x08, 0x00);

		}

		static void rouleur_mbhc_surge_control(struct wcd_mbhc *mbhc,
		bool surge_enable)
		{
		if (surge_enable)
		snd_soc_component_update_bits(mbhc->component,
		ROULEUR_ANA_SURGE_EN, 0xC0, 0xC0);
		else
		snd_soc_component_update_bits(mbhc->component,
		ROULEUR_ANA_SURGE_EN, 0xC0, 0x00);

		}

		static void rouleur_mbhc_update_cross_conn_thr(struct wcd_mbhc *mbhc)
		{
		mbhc->hphl_cross_conn_thr = ROULEUR_HPHL_CROSS_CONN_THRESHOLD;
		mbhc->hphr_cross_conn_thr = ROULEUR_HPHR_CROSS_CONN_THRESHOLD;

		pr_debug("%s: Cross connection threshold for hphl: %d, hphr: %d\n",
		__func__, mbhc->hphl_cross_conn_thr,
		mbhc->hphr_cross_conn_thr);
		}

		static const struct wcd_mbhc_cb mbhc_cb = {
		@@ -880,9 +896,10 @@ static const struct wcd_mbhc_cb mbhc_cb = {
		.mbhc_get_moisture_status = rouleur_mbhc_get_moisture_status,
		.mbhc_moisture_detect_en = rouleur_mbhc_moisture_detect_en,
		.bcs_enable = rouleur_mbhc_bcs_enable,
		.hs_vref_max_update = rouleur_mbhc_hs_vref_max_update,
		.get_micbias_val = rouleur_mbhc_get_micbias_val,
		.mbhc_micb_pullup_control = rouleur_mbhc_micb_pullup_control,
		.mbhc_comp_autozero_control = rouleur_mbhc_comp_autozero_control,
		.mbhc_surge_ctl = rouleur_mbhc_surge_control,
		.update_cross_conn_thr = rouleur_mbhc_update_cross_conn_thr,
		};

		static int rouleur_get_hph_type(struct snd_kcontrol *kcontrol,

asoc/codecs/rouleur/rouleur.c

+28 −8

Original line number	Diff line number	Diff line
		@@ -107,6 +107,9 @@ static int rouleur_handle_post_irq(void *data)

		static int rouleur_init_reg(struct snd_soc_component *component)
		{
		/* Disable HPH OCP */
		snd_soc_component_update_bits(component, ROULEUR_ANA_HPHPA_CNP_CTL_2,
		0x03, 0x00);
		/* Enable surge protection */
		snd_soc_component_update_bits(component, ROULEUR_ANA_SURGE_EN,
		0xC0, 0xC0);
		@@ -354,7 +357,7 @@ static int rouleur_rx_clk_enable(struct snd_soc_component *component)
		usleep_range(5000, 5100);
		rouleur_global_mbias_enable(component);
		snd_soc_component_update_bits(component,
		ROULEUR_ANA_HPHPA_FSM_CLK, 0x11, 0x11);
		ROULEUR_ANA_HPHPA_FSM_CLK, 0x7F, 0x11);
		snd_soc_component_update_bits(component,
		ROULEUR_ANA_HPHPA_FSM_CLK, 0x80, 0x80);
		snd_soc_component_update_bits(component,
		@@ -382,14 +385,14 @@ static int rouleur_rx_clk_disable(struct snd_soc_component *component)
		snd_soc_component_update_bits(component,
		ROULEUR_ANA_HPHPA_FSM_CLK, 0x80, 0x00);
		snd_soc_component_update_bits(component,
		ROULEUR_ANA_HPHPA_FSM_CLK, 0x11, 0x00);
		ROULEUR_ANA_HPHPA_FSM_CLK, 0x7F, 0x00);
		snd_soc_component_update_bits(component,
		ROULEUR_ANA_NCP_EN, 0x01, 0x00);
		rouleur_global_mbias_disable(component);
		snd_soc_component_update_bits(component,
		ROULEUR_DIG_SWR_CDC_RX_CLK_CTL, 0x20, 0x00);
		snd_soc_component_update_bits(component,
		ROULEUR_DIG_SWR_CDC_RX_CLK_CTL, 0x10, 0x00);
		rouleur_global_mbias_disable(component);

		}
		mutex_unlock(&rouleur->rx_clk_lock);
		@@ -480,6 +483,13 @@ static int rouleur_codec_hphl_dac_event(struct snd_soc_dapm_widget *w,
		snd_soc_component_update_bits(component,
		ROULEUR_DIG_SWR_CDC_RX_CLK_CTL,
		0x01, 0x00);
		snd_soc_component_update_bits(component,
		ROULEUR_DIG_SWR_CDC_RX_GAIN_CTL,
		0x04, 0x00);
		if (rouleur->comp1_enable)
		snd_soc_component_update_bits(component,
		ROULEUR_DIG_SWR_CDC_COMP_CTL_0,
		0x02, 0x00);
		break;
		}

		@@ -544,6 +554,13 @@ static int rouleur_codec_hphr_dac_event(struct snd_soc_dapm_widget *w,
		case SND_SOC_DAPM_POST_PMD:
		snd_soc_component_update_bits(component,
		ROULEUR_DIG_SWR_CDC_RX_CLK_CTL, 0x02, 0x00);
		snd_soc_component_update_bits(component,
		ROULEUR_DIG_SWR_CDC_RX_GAIN_CTL,
		0x08, 0x00);
		if (rouleur->comp2_enable)
		snd_soc_component_update_bits(component,
		ROULEUR_DIG_SWR_CDC_COMP_CTL_0,
		0x01, 0x00);
		break;

		}
		@@ -567,18 +584,21 @@ static int rouleur_codec_ear_lo_dac_event(struct snd_soc_dapm_widget *w,
		snd_soc_component_update_bits(component,
		ROULEUR_DIG_SWR_CDC_RX0_CTL,
		0x7C, 0x7C);
		snd_soc_component_update_bits(component,
		ROULEUR_DIG_SWR_CDC_RX_CLK_CTL,
		0x01, 0x01);
		snd_soc_component_update_bits(component,
		ROULEUR_DIG_SWR_CDC_RX_GAIN_CTL,
		0x04, 0x04);
		snd_soc_component_update_bits(component,
		ROULEUR_DIG_SWR_CDC_RX_CLK_CTL,
		0x01, 0x01);

		break;
		case SND_SOC_DAPM_POST_PMD:
		snd_soc_component_update_bits(component,
		ROULEUR_DIG_SWR_CDC_RX_CLK_CTL,
		0x01, 0x00);
		snd_soc_component_update_bits(component,
		ROULEUR_DIG_SWR_CDC_RX_GAIN_CTL,
		0x04, 0x00);

		break;
		};

asoc/codecs/wcd-mbhc-adc.c

+28 −1

Original line number	Diff line number	Diff line
		@@ -80,8 +80,22 @@ static int wcd_measure_adc_continuous(struct wcd_mbhc *mbhc)
		WCD_MBHC_REG_UPDATE_BITS(WCD_MBHC_FSM_EN, 0);
		/* Set the MUX selection to IN2P */
		WCD_MBHC_REG_UPDATE_BITS(WCD_MBHC_MUX_CTL, MUX_CTL_IN2P);

		/*
		* Current source mode requires Auto zeroing to be enabled
		* automatically. If HW doesn't do it, SW has to take care of this
		* for button interrupts to work fine and to avoid
		* fake electrical removal interrupts by enabling autozero before FSM
		* enable and disable it after FSM enable
		*/
		if (mbhc->mbhc_cb->mbhc_comp_autozero_control)
		mbhc->mbhc_cb->mbhc_comp_autozero_control(mbhc,
		true);
		/* Enable MBHC FSM */
		WCD_MBHC_REG_UPDATE_BITS(WCD_MBHC_FSM_EN, 1);
		if (mbhc->mbhc_cb->mbhc_comp_autozero_control)
		mbhc->mbhc_cb->mbhc_comp_autozero_control(mbhc,
		false);
		/* Enable ADC_ENABLE bit */
		WCD_MBHC_REG_UPDATE_BITS(WCD_MBHC_ADC_EN, 1);

		@@ -294,6 +308,10 @@ static int wcd_check_cross_conn(struct wcd_mbhc *mbhc)
		WCD_MBHC_REG_READ(WCD_MBHC_ELECT_SCHMT_ISRC, elect_ctl);
		WCD_MBHC_REG_UPDATE_BITS(WCD_MBHC_ELECT_SCHMT_ISRC, 0x00);

		/* Disable surge detection before ADC measurement */
		if (mbhc->mbhc_cb->mbhc_surge_ctl)
		mbhc->mbhc_cb->mbhc_surge_ctl(mbhc, false);

		/* Read and set ADC to single measurement */
		WCD_MBHC_REG_READ(WCD_MBHC_ADC_MODE, adc_mode);
		/* Read ADC Enable bit to restore after adc measurement */
		@@ -317,7 +335,12 @@ static int wcd_check_cross_conn(struct wcd_mbhc *mbhc)
		goto done;
		}

		if (hphl_adc_res > 100 \|\| hphr_adc_res > 100) {
		/* Update cross connection threshold voltages if needed */
		if (mbhc->mbhc_cb->update_cross_conn_thr)
		mbhc->mbhc_cb->update_cross_conn_thr(mbhc);

		if (hphl_adc_res > mbhc->hphl_cross_conn_thr \|\|
		hphr_adc_res > mbhc->hphr_cross_conn_thr) {
		plug_type = MBHC_PLUG_TYPE_GND_MIC_SWAP;
		pr_debug("%s: Cross connection identified\n", __func__);
		} else {
		@@ -339,6 +362,10 @@ static int wcd_check_cross_conn(struct wcd_mbhc *mbhc)
		/* Restore FSM state */
		WCD_MBHC_REG_UPDATE_BITS(WCD_MBHC_FSM_EN, fsm_en);

		/* Restore surge detection */
		if (mbhc->mbhc_cb->mbhc_surge_ctl)
		mbhc->mbhc_cb->mbhc_surge_ctl(mbhc, true);

		/* Restore electrical detection */
		WCD_MBHC_REG_UPDATE_BITS(WCD_MBHC_ELECT_SCHMT_ISRC, elect_ctl);

asoc/codecs/wcd-mbhc-v2.c

+8 −22

Original line number	Diff line number	Diff line
		@@ -77,9 +77,6 @@ static void wcd_program_hs_vref(struct wcd_mbhc *mbhc)
		struct snd_soc_component *component = mbhc->component;
		u32 reg_val;

		if (mbhc->mbhc_cb->hs_vref_max_update) {
		mbhc->mbhc_cb->hs_vref_max_update(mbhc);
		} else {
		plug_type_cfg = WCD_MBHC_CAL_PLUG_TYPE_PTR(
		mbhc->mbhc_cfg->calibration);
		reg_val = ((plug_type_cfg->v_hs_max - HS_VREF_MIN_VAL) / 100);
		@@ -88,7 +85,6 @@ static void wcd_program_hs_vref(struct wcd_mbhc *mbhc)
		__func__, reg_val);
		WCD_MBHC_REG_UPDATE_BITS(WCD_MBHC_HS_VREF, reg_val);
		}
		}

		static void wcd_program_btn_threshold(const struct wcd_mbhc *mbhc, bool micbias)
		{
		@@ -973,14 +969,6 @@ static void wcd_mbhc_swch_irq_handler(struct wcd_mbhc *mbhc)
		mbhc->mbhc_cb->enable_mb_source(mbhc, true);
		mbhc->btn_press_intr = false;
		mbhc->is_btn_press = false;
		/*
		* When current source mode doesn't work properly
		* use mic bias pull up mode for button interrupts
		* to function properly
		*/
		if (mbhc->mbhc_cb->mbhc_micb_pullup_control)
		mbhc->mbhc_cb->mbhc_micb_pullup_control(component,
		true);
		if (mbhc->mbhc_fn)
		mbhc->mbhc_fn->wcd_mbhc_detect_plug_type(mbhc);
		} else if ((mbhc->current_plug != MBHC_PLUG_TYPE_NONE)
		@@ -1055,10 +1043,6 @@ static void wcd_mbhc_swch_irq_handler(struct wcd_mbhc *mbhc)
		false);
		}

		if (mbhc->mbhc_cb->mbhc_micb_pullup_control)
		mbhc->mbhc_cb->mbhc_micb_pullup_control(component,
		false);

		} else if (!detection_type) {
		/* Disable external voltage source to micbias if present */
		if (mbhc->mbhc_cb->enable_mb_source)
		@@ -1815,6 +1799,8 @@ int wcd_mbhc_init(struct wcd_mbhc mbhc, struct snd_soc_component component,
		mbhc->hph_type = WCD_MBHC_HPH_NONE;
		mbhc->wcd_mbhc_regs = wcd_mbhc_regs;
		mbhc->swap_thr = GND_MIC_SWAP_THRESHOLD;
		mbhc->hphl_cross_conn_thr = HPHL_CROSS_CONN_THRESHOLD;
		mbhc->hphr_cross_conn_thr = HPHR_CROSS_CONN_THRESHOLD;

		if (mbhc->intr_ids == NULL) {
		pr_err("%s: Interrupt mapping not provided\n", __func__);

include/asoc/wcd-mbhc-v2.h

+10 −4

Original line number	Diff line number	Diff line
		@@ -140,6 +140,8 @@ do { \
		#define FW_READ_ATTEMPTS 15
		#define FW_READ_TIMEOUT 4000000
		#define FAKE_REM_RETRY_ATTEMPTS 3
		#define HPHL_CROSS_CONN_THRESHOLD 100
		#define HPHR_CROSS_CONN_THRESHOLD 100

		#define WCD_MBHC_BTN_PRESS_COMPL_TIMEOUT_MS 50
		#define ANC_DETECT_RETRY_CNT 7
		@@ -451,12 +453,14 @@ struct wcd_mbhc_register {
		};

		struct wcd_mbhc_cb {
		void (*mbhc_micb_pullup_control)
		(struct snd_soc_component *component, bool enable);
		void (*update_cross_conn_thr)
		(struct wcd_mbhc *mbhc);
		void (*mbhc_surge_ctl)
		(struct wcd_mbhc *mbhc, bool surge_en);
		void (*mbhc_comp_autozero_control)
		(struct wcd_mbhc *mbhc, bool az_enable);
		void (*get_micbias_val)
		(struct wcd_mbhc mbhc, int mb);
		void (*hs_vref_max_update)
		(struct wcd_mbhc *mbhc);
		void (*bcs_enable)
		(struct wcd_mbhc *mbhc, bool bcs_enable);
		int (enable_mb_source)(struct wcd_mbhc mbhc, bool turn_on);
		@@ -552,6 +556,8 @@ struct wcd_mbhc {
		u32 moist_vref;
		u32 moist_iref;
		u32 moist_rref;
		u32 hphl_cross_conn_thr;
		u32 hphr_cross_conn_thr;
		u8 micbias1_cap_mode; /* track ext cap setting */
		u8 micbias2_cap_mode; /* track ext cap setting */
		bool hs_detect_work_stop;