staging: brcm80211: Remove cruft from wlioctl.h

#include <packed_section_start.h>

#ifdef BRCM_FULLMAC

/* Legacy structure to help keep backward compatible wl tool and tray app */

#define	LEGACY_WL_BSS_INFO_VERSION	107	/* older version of wl_bss_info struct */

typedef struct wl_bss_info_107 {

	u32 version;		/* version field */

	u32 length;		/* byte length of data in this record,

				 * starting at version and including IEs

				 */

	struct ether_addr BSSID;

	u16 beacon_period;	/* units are Kusec */

	u16 capability;	/* Capability information */

	u8 SSID_len;

	u8 SSID[32];

	struct {

		uint count;	/* # rates in this set */

		u8 rates[16];	/* rates in 500kbps units w/hi bit set if basic */

	} rateset;		/* supported rates */

	u8 channel;		/* Channel no. */

	u16 atim_window;	/* units are Kusec */

	u8 dtim_period;	/* DTIM period */

	s16 RSSI;		/* receive signal strength (in dBm) */

	s8 phy_noise;		/* noise (in dBm) */

	u32 ie_length;	/* byte length of Information Elements */

	/* variable length Information Elements */

} wl_bss_info_107_t;

/*

 * Per-BSS information structure.

 */

#define	LEGACY2_WL_BSS_INFO_VERSION	108	/* old version of wl_bss_info struct */

/* BSS info structure

 * Applications MUST CHECK ie_offset field and length field to access IEs and

 * next bss_info structure in a vector (in wl_scan_results_t)

 */

typedef struct wl_bss_info_108 {

	u32 version;		/* version field */

	u32 length;		/* byte length of data in this record,

				 * starting at version and including IEs

				 */

	struct ether_addr BSSID;

	u16 beacon_period;	/* units are Kusec */

	u16 capability;	/* Capability information */

	u8 SSID_len;

	u8 SSID[32];

	struct {

		uint count;	/* # rates in this set */

		u8 rates[16];	/* rates in 500kbps units w/hi bit set if basic */

	} rateset;		/* supported rates */

	chanspec_t chanspec;	/* chanspec for bss */

	u16 atim_window;	/* units are Kusec */

	u8 dtim_period;	/* DTIM period */

	s16 RSSI;		/* receive signal strength (in dBm) */

	s8 phy_noise;		/* noise (in dBm) */

	u8 n_cap;		/* BSS is 802.11N Capable */

	u32 nbss_cap;	/* 802.11N BSS Capabilities (based on HT_CAP_*) */

	u8 ctl_ch;		/* 802.11N BSS control channel number */

	u32 reserved32[1];	/* Reserved for expansion of BSS properties */

	u8 flags;		/* flags */

	u8 reserved[3];	/* Reserved for expansion of BSS properties */

	u8 basic_mcs[MCSSET_LEN];	/* 802.11N BSS required MCS set */

	u16 ie_offset;	/* offset at which IEs start, from beginning */

	u32 ie_length;	/* byte length of Information Elements */

	/* Add new fields here */

	/* variable length Information Elements */

} wl_bss_info_108_t;

#ifdef BRCM_FULLMAC

#define	WL_BSS_INFO_VERSION	108	/* current ver of wl_bss_info struct */

#else

#define	WL_BSS_INFO_VERSION	109	/* current ver of wl_bss_info struct */

#endif

/* BSS info structure

 * Applications MUST CHECK ie_offset field and length field to access IEs and

	u8 activehi;

} wl_led_info_t;

/* flags */

#define WLC_ASSOC_REQ_IS_REASSOC 0x01	/* assoc req was actually a reassoc */

/* srom read/write struct passed through ioctl */

typedef struct {

	uint byteoff;		/* byte offset */

	uint nbytes;		/* number of bytes */

	u16 buf[1];

} srom_rw_t;

/* similar cis (srom or otp) struct [iovar: may not be aligned] */

typedef struct {

	u32 source;		/* cis source */

	u32 byteoff;		/* byte offset */

	u32 nbytes;		/* number of bytes */

	/* data follows here */

} cis_rw_t;

#define WLC_CIS_DEFAULT	0	/* built-in default */

#define WLC_CIS_SROM	1	/* source is sprom */

#define WLC_CIS_OTP	2	/* source is otp */

/* R_REG and W_REG struct passed through ioctl */

typedef struct {

	uint band;		/* band (optional) */

} rw_reg_t;

/* Structure used by GET/SET_ATTEN ioctls - it controls power in b/g-band */

/* PCL - Power Control Loop */

/* current gain setting is replaced by user input */

#define WL_ATTEN_APP_INPUT_PCL_OFF	0	/* turn off PCL, apply supplied input */

#define WL_ATTEN_PCL_ON			1	/* turn on PCL */

/* current gain setting is maintained */

#define WL_ATTEN_PCL_OFF		2	/* turn off PCL. */

typedef struct {

	u16 auto_ctrl;	/* WL_ATTEN_XX */

	u16 bb;		/* Baseband attenuation */

	u16 radio;		/* Radio attenuation */

	u16 txctl1;		/* Radio TX_CTL1 value */

} atten_t;

/* Per-AC retry parameters */

struct wme_tx_params_s {

	u8 short_retry;

	u8 short_fallback;

	u8 long_retry;

	u8 long_fallback;

	u16 max_rate;	/* In units of 512 Kbps */

};

typedef struct wme_tx_params_s wme_tx_params_t;

#define WL_WME_TX_PARAMS_IO_BYTES (sizeof(wme_tx_params_t) * AC_COUNT)

/* defines used by poweridx iovar - it controls power in a-band */

/* current gain setting is maintained */

#define WL_PWRIDX_PCL_OFF	-2	/* turn off PCL.  */

#define WL_PWRIDX_PCL_ON	-1	/* turn on PCL */

#define WL_PWRIDX_LOWER_LIMIT	-2	/* lower limit */

#define WL_PWRIDX_UPPER_LIMIT	63	/* upper limit */

/* value >= 0 causes

 *	- input to be set to that value

 *	- PCL to be off

 */

/* Used to get specific link/ac parameters */

typedef struct {

	int ac;

	u8 val;

	struct ether_addr ea;

} link_val_t;

#define BCM_MAC_STATUS_INDICATION	(0x40010200L)

typedef struct {

	u16 ver;		/* version of this struct */

	u16 len;		/* length in bytes of this structure */

	u16 cap;		/* sta's advertised capabilities */

	u32 flags;		/* flags defined below */

	u32 idle;		/* time since data pkt rx'd from sta */

	struct ether_addr ea;	/* Station address */

	wl_rateset_t rateset;	/* rateset in use */

	u32 in;		/* seconds elapsed since associated */

	u32 listen_interval_inms;	/* Min Listen interval in ms for this STA */

	u32 tx_pkts;		/* # of packets transmitted */

	u32 tx_failures;	/* # of packets failed */

	u32 rx_ucast_pkts;	/* # of unicast packets received */

	u32 rx_mcast_pkts;	/* # of multicast packets received */

	u32 tx_rate;		/* Rate of last successful tx frame */

	u32 rx_rate;		/* Rate of last successful rx frame */

	u32 rx_decrypt_succeeds;	/* # of packet decrypted successfully */

	u32 rx_decrypt_failures;	/* # of packet decrypted unsuccessfully */

} sta_info_t;

#define WL_OLD_STAINFO_SIZE	offsetof(sta_info_t, tx_pkts)

#define WL_STA_VER		3

/* Flags for sta_info_t indicating properties of STA */

#define WL_STA_BRCM		0x1	/* Running a Broadcom driver */

#define WL_STA_WME		0x2	/* WMM association */

#define WL_STA_ABCAP		0x4

#define WL_STA_AUTHE		0x8	/* Authenticated */

#define WL_STA_ASSOC		0x10	/* Associated */

#define WL_STA_AUTHO		0x20	/* Authorized */

#define WL_STA_WDS		0x40	/* Wireless Distribution System */

#define WL_STA_WDS_LINKUP	0x80	/* WDS traffic/probes flowing properly */

#define WL_STA_PS		0x100	/* STA is in power save mode from AP's viewpoint */

#define WL_STA_APSD_BE		0x200	/* APSD delv/trigger for AC_BE is default enabled */

#define WL_STA_APSD_BK		0x400	/* APSD delv/trigger for AC_BK is default enabled */

#define WL_STA_APSD_VI		0x800	/* APSD delv/trigger for AC_VI is default enabled */

#define WL_STA_APSD_VO		0x1000	/* APSD delv/trigger for AC_VO is default enabled */

#define WL_STA_N_CAP		0x2000	/* STA 802.11n capable */

#define WL_STA_SCBSTATS		0x4000	/* Per STA debug stats */

#define WL_WDS_LINKUP		WL_STA_WDS_LINKUP	/* deprecated */

#ifdef BRCM_FULLMAC

/* Used to get specific STA parameters */

typedef struct {

	u32 val;

	struct ether_addr ea;

} scb_val_t;

#endif /* BRCM_FULLMAC */

/* channel encoding */

typedef struct channel_info {

	uint rx_ocast_good_pkt;	/* unicast packets destined for others */

} get_pktcnt_t;

#ifdef BRCM_FULLMAC

/* Linux network driver ioctl encoding */

typedef struct wl_ioctl {

	uint cmd;		/* common ioctl definition */

	uint used;		/* bytes read or written (optional) */

	uint needed;		/* bytes needed (optional) */

} wl_ioctl_t;

#endif /* BRCM_FULLMAC */

/* reference to wl_ioctl_t struct used by usermode driver */

#define ioctl_subtype	set	/* subtype param */

#define ioctl_pid	used	/* pid param */

#define ioctl_status	needed	/* status param */

/*

 * Structure for passing hardware and software

#define WL_REV_INFO_LEGACY_LENGTH	48

#define WL_BRAND_MAX 10

typedef struct wl_instance_info {

	uint instance;

	char brand[WL_BRAND_MAX];

} wl_instance_info_t;

/* structure to change size of tx fifo */

typedef struct wl_txfifo_sz {

	u16 magic;

	u16 fifo;

	u16 size;

} wl_txfifo_sz_t;

/* magic pattern used for mismatch driver and wl */

#define WL_TXFIFO_SZ_MAGIC	0xa5a5

/* Transfer info about an IOVar from the driver */

/* Max supported IOV name size in bytes, + 1 for nul termination */

#define WLC_IOV_NAME_LEN 30

typedef struct wlc_iov_trx_s {

	u8 module;

	u8 type;

	char name[WLC_IOV_NAME_LEN];

} wlc_iov_trx_t;

/* check this magic number */

#define WLC_IOCTL_MAGIC		0x14e46c77

#define PROC_ENTRY_NAME "brcm_debug"

/* bump this number if you change the ioctl interface */

#define WLC_IOCTL_VERSION	1

#ifdef BRCM_FULLMAC

#define	WLC_IOCTL_MAXLEN	8192

#else

#define	WLC_IOCTL_MAXLEN		3072	/* max length ioctl buffer required */

#endif

#define	WLC_IOCTL_SMLEN			256	/* "small" length ioctl buffer required */

#define WLC_IOCTL_MEDLEN		1536	/* "med" length ioctl buffer required */

#define WLC_SAMPLECOLLECT_MAXLEN	10240	/* Max Sample Collect buffer for two cores */

#define	WLC_IOCTL_MAXLEN	8192

#endif

/* common ioctl definitions */

#define WLC_GET_MAGIC				0

#define WL_TX_POWER_MCS40_FIRST	        28

#define WL_TX_POWER_MCS40_NUM	        17

typedef struct {

	u32 flags;

	chanspec_t chanspec;	/* txpwr report for this channel */

	chanspec_t local_chanspec;	/* channel on which we are associated */

	u8 local_max;	/* local max according to the AP */

	u8 local_constraint;	/* local constraint according to the AP */

	s8 antgain[2];	/* Ant gain for each band - from SROM */

	u8 rf_cores;		/* count of RF Cores being reported */

	u8 est_Pout[4];	/* Latest tx power out estimate per RF

				 * chain without adjustment

				 */

	u8 est_Pout_cck;	/* Latest CCK tx power out estimate */

	u8 user_limit[WL_TX_POWER_RATES_LEGACY];	/* User limit */

	u8 reg_limit[WL_TX_POWER_RATES_LEGACY];	/* Regulatory power limit */

	u8 board_limit[WL_TX_POWER_RATES_LEGACY];	/* Max power board can support (SROM) */

	u8 target[WL_TX_POWER_RATES_LEGACY];	/* Latest target power */

} tx_power_legacy2_t;

#define WL_TX_POWER_RATES	       101

#define WL_TX_POWER_CCK_FIRST	       0

	u8 retry;		/* retry value */

};

/* structure for addts arguments */

/* For ioctls that take a list of TSPEC */

struct tslist {

	int count;		/* number of tspecs */

	struct tsinfo_arg tsinfo[1];	/* variable length array of tsinfo */

};

/* structure for addts/delts arguments */

typedef struct tspec_arg {

	u16 version;		/* see definition of TSPEC_ARG_VERSION */

	u16 length;		/* length of entire structure */

	uint flag;		/* bit field */

	/* TSPEC Arguments */

	struct tsinfo_arg tsinfo;	/* TS Info bit field */

	u16 nom_msdu_size;	/* (Nominal or fixed) MSDU Size (bytes) */

	u16 max_msdu_size;	/* Maximum MSDU Size (bytes) */

	uint min_srv_interval;	/* Minimum Service Interval (us) */

	uint max_srv_interval;	/* Maximum Service Interval (us) */

	uint inactivity_interval;	/* Inactivity Interval (us) */

	uint suspension_interval;	/* Suspension Interval (us) */

	uint srv_start_time;	/* Service Start Time (us) */

	uint min_data_rate;	/* Minimum Data Rate (bps) */

	uint mean_data_rate;	/* Mean Data Rate (bps) */

	uint peak_data_rate;	/* Peak Data Rate (bps) */

	uint max_burst_size;	/* Maximum Burst Size (bytes) */

	uint delay_bound;	/* Delay Bound (us) */

	uint min_phy_rate;	/* Minimum PHY Rate (bps) */

	u16 surplus_bw;	/* Surplus Bandwidth Allowance (range 1.0 to 8.0) */

	u16 medium_time;	/* Medium Time (32 us/s periods) */

	u8 dialog_token;	/* dialog token */

} tspec_arg_t;

/* tspec arg for desired station */

typedef struct tspec_per_sta_arg {

	struct ether_addr ea;

	struct tspec_arg ts;

} tspec_per_sta_arg_t;

/* structure for max bandwidth for each access category */

typedef struct wme_max_bandwidth {

	u32 ac[AC_COUNT];	/* max bandwidth for each access category */

} wme_max_bandwidth_t;

#define WL_WME_MBW_PARAMS_IO_BYTES (sizeof(wme_max_bandwidth_t))

/* current version of wl_tspec_arg_t struct */

#define	TSPEC_ARG_VERSION		2	/* current version of wl_tspec_arg_t struct */

#define TSPEC_ARG_LENGTH		55	/* argument length from tsinfo to medium_time */

#define TSPEC_DEFAULT_DIALOG_TOKEN	42	/* default dialog token */

#define TSPEC_DEFAULT_SBW_FACTOR	0x3000	/* default surplus bw */

/* define for flag */

#define TSPEC_PENDING		0	/* TSPEC pending */

#define TSPEC_ACCEPTED		1	/* TSPEC accepted */

#define TSPEC_REJECTED		2	/* TSPEC rejected */

#define TSPEC_UNKNOWN		3	/* TSPEC unknown */

#define TSPEC_STATUS_MASK	7	/* TSPEC status mask */

/* Software feature flag defines used by wlfeatureflag */

#define WL_SWFL_NOHWRADIO	0x0004

#define WL_LIFETIME_MAX 0xFFFF	/* Max value in ms */

/*

 * Dongle pattern matching filter.

 */

/* Packet filter types. Currently, only pattern matching is supported. */

typedef enum wl_pkt_filter_type {

	WL_PKT_FILTER_TYPE_PATTERN_MATCH	/* Pattern matching filter */

} wl_pkt_filter_type_t;

#define WL_PKT_FILTER_TYPE wl_pkt_filter_type_t

/* Pattern matching filter. Specifies an offset within received packets to

 * start matching, the pattern to match, the size of the pattern, and a bitmask

	u32 enable;		/* Enable/disable bool */

} wl_pkt_filter_enable_t;

/* IOVAR "pkt_filter_list" parameter. Used to retrieve a list of installed filters. */

typedef struct wl_pkt_filter_list {

	u32 num;		/* Number of installed packet filters */

	wl_pkt_filter_t filter[1];	/* Variable array of packet filters. */

} wl_pkt_filter_list_t;

#define WL_PKT_FILTER_LIST_FIXED_LEN	  offsetof(wl_pkt_filter_list_t, filter)

/* IOVAR "pkt_filter_stats" parameter. Used to retrieve debug statistics. */

typedef struct wl_pkt_filter_stats {

	u32 num_pkts_matched;	/* # filter matches for specified filter id */

	u32 num_pkts_forwarded;	/* # packets fwded from dongle to host for all filters */

	u32 num_pkts_discarded;	/* # packets discarded by dongle for all filters */

} wl_pkt_filter_stats_t;

#define	WLC_RSSI_INVALID	 0	/* invalid RSSI value */