Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit a261eec0 authored by Mike Frysinger's avatar Mike Frysinger
Browse files

Blackfin: rename some Blackfin drivers 



Try to keep the naming conventions consistent, so:
	SPI_ADC_BF533 -> BFIN_SPI_ADC
	TWI_LCD       -> BFIN_TWI_LCD

Signed-off-by: default avatarMike Frysinger <vapier@gentoo.org>
parent a17c7f6f

arch/blackfin/mach-bf518/boards/ezbrd.c

+5 −5
Original line number Diff line number Diff line
@@ -166,8 +166,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { 
};

#endif



#if defined(CONFIG_SPI_ADC_BF533) \

	|| defined(CONFIG_SPI_ADC_BF533_MODULE)

#if defined(CONFIG_BFIN_SPI_ADC) \

	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)

/* SPI ADC chip */

static struct bfin5xx_spi_chip spi_adc_chip_info = {

	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -253,8 +253,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { 
	},

#endif



#if defined(CONFIG_SPI_ADC_BF533) \

	|| defined(CONFIG_SPI_ADC_BF533_MODULE)

#if defined(CONFIG_BFIN_SPI_ADC) \

	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)

	{

		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */

		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -518,7 +518,7 @@ static struct platform_device i2c_bfin_twi_device = { 
#endif



static struct i2c_board_info __initdata bfin_i2c_board_info[] = {

#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)

#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)

	{

		I2C_BOARD_INFO("pcf8574_lcd", 0x22),

	},

arch/blackfin/mach-bf527/boards/cm_bf527.c

+5 −5
Original line number Diff line number Diff line
@@ -463,8 +463,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { 
};

#endif



#if defined(CONFIG_SPI_ADC_BF533) \

	|| defined(CONFIG_SPI_ADC_BF533_MODULE)

#if defined(CONFIG_BFIN_SPI_ADC) \

	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)

/* SPI ADC chip */

static struct bfin5xx_spi_chip spi_adc_chip_info = {

	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -554,8 +554,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { 
	},

#endif



#if defined(CONFIG_SPI_ADC_BF533) \

	|| defined(CONFIG_SPI_ADC_BF533_MODULE)

#if defined(CONFIG_BFIN_SPI_ADC) \

	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)

	{

		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */

		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -789,7 +789,7 @@ static struct platform_device i2c_bfin_twi_device = { 
#endif



static struct i2c_board_info __initdata bfin_i2c_board_info[] = {

#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)

#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)

	{

		I2C_BOARD_INFO("pcf8574_lcd", 0x22),

		.type = "pcf8574_lcd",

arch/blackfin/mach-bf527/boards/ezbrd.c

+5 −5
Original line number Diff line number Diff line
@@ -247,8 +247,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { 
};

#endif



#if defined(CONFIG_SPI_ADC_BF533) \

	|| defined(CONFIG_SPI_ADC_BF533_MODULE)

#if defined(CONFIG_BFIN_SPI_ADC) \

	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)

/* SPI ADC chip */

static struct bfin5xx_spi_chip spi_adc_chip_info = {

	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -354,8 +354,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { 
	},

#endif



#if defined(CONFIG_SPI_ADC_BF533) \

	|| defined(CONFIG_SPI_ADC_BF533_MODULE)

#if defined(CONFIG_BFIN_SPI_ADC) \

	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)

	{

		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */

		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -586,7 +586,7 @@ static struct platform_device i2c_bfin_twi_device = { 
#endif



static struct i2c_board_info __initdata bfin_i2c_board_info[] = {

#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)

#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)

	{

		I2C_BOARD_INFO("pcf8574_lcd", 0x22),

	},

arch/blackfin/mach-bf527/boards/ezkit.c

+5 −5
Original line number Diff line number Diff line
@@ -485,8 +485,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { 
};

#endif



#if defined(CONFIG_SPI_ADC_BF533) \

	|| defined(CONFIG_SPI_ADC_BF533_MODULE)

#if defined(CONFIG_BFIN_SPI_ADC) \

	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)

/* SPI ADC chip */

static struct bfin5xx_spi_chip spi_adc_chip_info = {

	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -600,8 +600,8 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { 
	},

#endif



#if defined(CONFIG_SPI_ADC_BF533) \

	|| defined(CONFIG_SPI_ADC_BF533_MODULE)

#if defined(CONFIG_BFIN_SPI_ADC) \

	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)

	{

		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */

		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -854,7 +854,7 @@ static struct platform_device i2c_bfin_twi_device = { 
#endif



static struct i2c_board_info __initdata bfin_i2c_board_info[] = {

#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)

#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)

	{

		I2C_BOARD_INFO("pcf8574_lcd", 0x22),

	},

arch/blackfin/mach-bf533/boards/H8606.c

+2 −2
Original line number Diff line number Diff line
@@ -173,7 +173,7 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = { 
};

#endif



#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)

#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)

/* SPI ADC chip */

static struct bfin5xx_spi_chip spi_adc_chip_info = {

	.ctl_reg = 0x1000,
@@ -216,7 +216,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { 
	},

#endif



#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE)

#if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)

	{

		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */

		.max_speed_hz = 4,     /* actual baudrate is SCLK/(2xspeed_hz) */