Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 978f8f60 authored by Lothar Waßmann's avatar Lothar Waßmann Committed by Shawn Guo
Browse files

ARM: dts: imx: add support for TX6QP 



The TX6QP-8037 is a Computer On Module manufactured by
  Ka-Ro electronics GmbH with the following characteristics:
  Processor    Freescale i.MX 6QuadPlus MCIMX6QP7, 1 GHz
  RAM          1GiB 64-bit DDR3 SDRAM
  ROM          4GB HiRel eMMC
  Power supply Single 3.3 to 5V
  Size         26mm SO-DIMM
  Temp. Range  -40°C to 105°C

Signed-off-by: default avatarLothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 4649d838

arch/arm/boot/dts/Makefile

+2 −0
Original line number Diff line number Diff line
@@ -462,6 +462,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ 
	imx6qp-nitrogen6_som2.dtb \

	imx6qp-sabreauto.dtb \

	imx6qp-sabresd.dtb \

	imx6qp-tx6qp-8037.dtb \

	imx6qp-tx6qp-8137.dtb \

	imx6qp-wandboard-revd1.dtb \

	imx6qp-zii-rdu2.dtb

dtb-$(CONFIG_SOC_IMX6SL) += \

arch/arm/boot/dts/imx6qp-tx6qp-8037.dts

0 → 100644
+86 −0
Original line number Diff line number Diff line 
/*

 * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This file is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License

 *     version 2 as published by the Free Software Foundation.

 *

 *     This file is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */



/dts-v1/;

#include "imx6qp.dtsi"

#include "imx6qdl-tx6.dtsi"

#include "imx6qdl-tx6-lcd.dtsi"



/ {

	model = "Ka-Ro electronics TX6QP-8037 Module";

	compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp";

};



&ds1339 {

	status = "disabled";

};



&gpmi {

	status = "disabled";

};



&ipu2 {

	status = "disabled";

};



&usdhc4 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_usdhc4>;

	bus-width = <4>;

	non-removable;

	no-1-8-v;

	fsl,wp-controller;

	status = "okay";

};



&iomuxc {

	pinctrl_usdhc4: usdhc4grp {

		fsl,pins = <

			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1

			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1

			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1

			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1

			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1

			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1

			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1

		>;

	};

};

arch/arm/boot/dts/imx6qp-tx6qp-8137.dts

0 → 100644
+90 −0
Original line number Diff line number Diff line 
/*

 * Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>

 *

 * This file is dual-licensed: you can use it either under the terms

 * of the GPL or the X11 license, at your option. Note that this dual

 * licensing only applies to this file, and not this project as a

 * whole.

 *

 *  a) This file is free software; you can redistribute it and/or

 *     modify it under the terms of the GNU General Public License

 *     version 2 as published by the Free Software Foundation.

 *

 *     This file is distributed in the hope that it will be useful,

 *     but WITHOUT ANY WARRANTY; without even the implied warranty of

 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 *     GNU General Public License for more details.

 *

 * Or, alternatively,

 *

 *  b) Permission is hereby granted, free of charge, to any person

 *     obtaining a copy of this software and associated documentation

 *     files (the "Software"), to deal in the Software without

 *     restriction, including without limitation the rights to use,

 *     copy, modify, merge, publish, distribute, sublicense, and/or

 *     sell copies of the Software, and to permit persons to whom the

 *     Software is furnished to do so, subject to the following

 *     conditions:

 *

 *     The above copyright notice and this permission notice shall be

 *     included in all copies or substantial portions of the Software.

 *

 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

 *     OTHER DEALINGS IN THE SOFTWARE.

 */



/dts-v1/;

#include "imx6qp.dtsi"

#include "imx6qdl-tx6.dtsi"

#include "imx6qdl-tx6-lvds.dtsi"



/ {

	model = "Ka-Ro electronics TX6QP-8137 Module";

	compatible = "karo,imx6qp-tx6qp", "fsl,imx6qp";

};



&ds1339 {

	status = "disabled";

};



&gpmi {

	status = "disabled";

};



&ipu2 {

	status = "disabled";

};



&sata {

	status = "okay";

};



&usdhc4 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_usdhc4>;

	bus-width = <4>;

	non-removable;

	no-1-8-v;

	fsl,wp-controller;

	status = "okay";

};



&iomuxc {

	pinctrl_usdhc4: usdhc4grp {

		fsl,pins = <

			MX6QDL_PAD_SD4_CMD__SD4_CMD		0x070b1

			MX6QDL_PAD_SD4_CLK__SD4_CLK		0x070b1

			MX6QDL_PAD_SD4_DAT0__SD4_DATA0		0x070b1

			MX6QDL_PAD_SD4_DAT1__SD4_DATA1		0x070b1

			MX6QDL_PAD_SD4_DAT2__SD4_DATA2		0x070b1

			MX6QDL_PAD_SD4_DAT3__SD4_DATA3		0x070b1

			MX6QDL_PAD_NANDF_ALE__SD4_RESET		0x0b0b1

		>;

	};

};