Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 949b38af authored by Tejun Heo's avatar Tejun Heo Committed by Jeff Garzik
Browse files

[PATCH] libata: clean up constants



* Reorder ATA_DFLAG_* such that feature flags determined by
  ata_dev_configure() are on lower bits.  Reserve lower eight bits
  for this purpose and allocate dynamic flags from bit 8.

* Reorder ATA_FLAG_* such that feature flags determined during driver
  initiailization are on bits 0:15, dynamic flags on 16:23 and LLDD
  specific flags on 24:31.

* Kill trailing white space and lower-case an one line comment for
  consistency.

Signed-off-by: default avatarTejun Heo <htejun@gmail.com>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent c43c555c
Loading
Loading
Loading
Loading
+32 −29
Original line number Diff line number Diff line
@@ -120,9 +120,10 @@ enum {
	ATA_SHT_USE_CLUSTERING	= 1,

	/* struct ata_device stuff */
	ATA_DFLAG_LBA48		= (1 << 0), /* device supports LBA48 */
	ATA_DFLAG_PIO		= (1 << 1), /* device currently in PIO mode */
	ATA_DFLAG_LBA		= (1 << 2), /* device supports LBA */
	ATA_DFLAG_LBA		= (1 << 0), /* device supports LBA */
	ATA_DFLAG_LBA48		= (1 << 1), /* device supports LBA48 */

	ATA_DFLAG_PIO		= (1 << 8), /* device currently in PIO mode */

	ATA_DEV_UNKNOWN		= 0,	/* unknown device */
	ATA_DEV_ATA		= 1,	/* ATA device */
@@ -132,32 +133,34 @@ enum {
	ATA_DEV_NONE		= 5,	/* no device */

	/* struct ata_port flags */
	ATA_FLAG_SLAVE_POSS	= (1 << 1), /* host supports slave dev */
	ATA_FLAG_SLAVE_POSS	= (1 << 0), /* host supports slave dev */
					    /* (doesn't imply presence) */
	ATA_FLAG_PORT_DISABLED	= (1 << 2), /* port is disabled, ignore it */
	ATA_FLAG_SATA		= (1 << 3),
	ATA_FLAG_NO_LEGACY	= (1 << 4), /* no legacy mode check */
	ATA_FLAG_SRST		= (1 << 5), /* (obsolete) use ATA SRST, not E.D.D. */
	ATA_FLAG_MMIO		= (1 << 6), /* use MMIO, not PIO */
	ATA_FLAG_SATA_RESET	= (1 << 7), /* (obsolete) use COMRESET */
	ATA_FLAG_PIO_DMA	= (1 << 8), /* PIO cmds via DMA */
	ATA_FLAG_NOINTR		= (1 << 9), /* FIXME: Remove this once
	ATA_FLAG_SATA		= (1 << 1),
	ATA_FLAG_NO_LEGACY	= (1 << 2), /* no legacy mode check */
	ATA_FLAG_MMIO		= (1 << 3), /* use MMIO, not PIO */
	ATA_FLAG_SRST		= (1 << 4), /* (obsolete) use ATA SRST, not E.D.D. */
	ATA_FLAG_SATA_RESET	= (1 << 5), /* (obsolete) use COMRESET */
	ATA_FLAG_NO_ATAPI	= (1 << 6), /* No ATAPI support */
	ATA_FLAG_PIO_DMA	= (1 << 7), /* PIO cmds via DMA */
	ATA_FLAG_PIO_LBA48	= (1 << 8), /* Host DMA engine is LBA28 only */
	ATA_FLAG_IRQ_MASK	= (1 << 9), /* Mask IRQ in PIO xfers */

	ATA_FLAG_NOINTR		= (1 << 16), /* FIXME: Remove this once
					      * proper HSM is in place. */
	ATA_FLAG_DEBUGMSG	= (1 << 10),
	ATA_FLAG_NO_ATAPI	= (1 << 11), /* No ATAPI support */

	ATA_FLAG_SUSPENDED	= (1 << 12), /* port is suspended */
	ATA_FLAG_DEBUGMSG	= (1 << 17),
	ATA_FLAG_FLUSH_PORT_TASK = (1 << 18), /* flush port task */

	ATA_FLAG_PIO_LBA48	= (1 << 13), /* Host DMA engine is LBA28 only */
	ATA_FLAG_IRQ_MASK	= (1 << 14), /* Mask IRQ in PIO xfers */
	ATA_FLAG_PORT_DISABLED	= (1 << 19), /* port is disabled, ignore it */
	ATA_FLAG_SUSPENDED	= (1 << 20), /* port is suspended */

	ATA_FLAG_FLUSH_PORT_TASK = (1 << 15), /* Flush port task */
	/* bits 24:31 of ap->flags are reserved for LLDD specific flags */

	ATA_QCFLAG_ACTIVE	= (1 << 1), /* cmd not yet ack'd to scsi lyer */
	ATA_QCFLAG_SG		= (1 << 3), /* have s/g table? */
	ATA_QCFLAG_SINGLE	= (1 << 4), /* no s/g, just a single buffer */
	/* struct ata_queued_cmd flags */
	ATA_QCFLAG_ACTIVE	= (1 << 0), /* cmd not yet ack'd to scsi lyer */
	ATA_QCFLAG_SG		= (1 << 1), /* have s/g table? */
	ATA_QCFLAG_SINGLE	= (1 << 2), /* no s/g, just a single buffer */
	ATA_QCFLAG_DMAMAP	= ATA_QCFLAG_SG | ATA_QCFLAG_SINGLE,
	ATA_QCFLAG_EH_SCHEDULED = (1 << 5), /* EH scheduled */
	ATA_QCFLAG_EH_SCHEDULED = (1 << 3), /* EH scheduled */

	/* host set flags */
	ATA_HOST_SIMPLEX	= (1 << 0),	/* Host is simplex, one DMA channel per host_set only */
@@ -207,7 +210,7 @@ enum {
	ATA_DMA_PAD_SZ		= 4,
	ATA_DMA_PAD_BUF_SZ	= ATA_DMA_PAD_SZ * ATA_MAX_QUEUE,

	/* Masks for port functions */
	/* masks for port functions */
	ATA_PORT_PRIMARY	= (1 << 0),
	ATA_PORT_SECONDARY	= (1 << 1),