Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 8e5f3d0a authored Jul 17, 2008 by Andrey Yurovsky Committed by John W. Linville Aug 22, 2008

ath5k: add Mesh Point support



This enables draft-802.11s Mesh Point operation.  For that we need mesh
beaconing.  Tested with AR5212/AR5213 PCI card against Zydas and b43 mesh
nodes.

Signed-off-by: Andrey Yurovsky <andrey@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

parent d92a8e81

drivers/net/wireless/ath5k/base.c

+3 −1

Original line number	Diff line number	Diff line
		@@ -1432,7 +1432,8 @@ ath5k_beaconq_config(struct ath5k_softc *sc)
		ret = ath5k_hw_get_tx_queueprops(ah, sc->bhalq, &qi);
		if (ret)
		return ret;
		if (sc->opmode == IEEE80211_IF_TYPE_AP) {
		if (sc->opmode == IEEE80211_IF_TYPE_AP \|\|
		sc->opmode == IEEE80211_IF_TYPE_MESH_POINT) {
		/*
		* Always burst out beacon and CAB traffic
		* (aifs = cwmin = cwmax = 0)
		@@ -2932,6 +2933,7 @@ static void ath5k_configure_filter(struct ieee80211_hw *hw,
		if (sc->opmode != IEEE80211_IF_TYPE_STA)
		rfilt \|= AR5K_RX_FILTER_PROBEREQ;
		if (sc->opmode != IEEE80211_IF_TYPE_AP &&
		sc->opmode != IEEE80211_IF_TYPE_MESH_POINT &&
		test_bit(ATH_STAT_PROMISC, sc->status))
		rfilt \|= AR5K_RX_FILTER_PROM;
		if (sc->opmode == IEEE80211_IF_TYPE_STA \|\|

drivers/net/wireless/ath5k/hw.c

+1 −0

Original line number	Diff line number	Diff line
		@@ -2387,6 +2387,7 @@ int ath5k_hw_set_opmode(struct ath5k_hw *ah)
		break;

		case IEEE80211_IF_TYPE_AP:
		case IEEE80211_IF_TYPE_MESH_POINT:
		pcu_reg \|= AR5K_STA_ID1_AP \| AR5K_STA_ID1_RTS_DEF_ANTENNA \|
		(ah->ah_version == AR5K_AR5210 ?
		AR5K_STA_ID1_NO_PSPOLL : 0);