ARM: Kirkwood: Add support for DLink DIR665 (8c0ff7a1) · Commits · e / devices / android_kernel_oneplus_sm7250

arch/arm/boot/dts/Makefile

+1 −0

Original line number	Diff line number	Diff line
		@@ -104,6 +104,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \
		kirkwood-d2net.dtb \
		kirkwood-db-88f6281.dtb \
		kirkwood-db-88f6282.dtb \
		kirkwood-dir665.dtb \
		kirkwood-dns320.dtb \
		kirkwood-dns325.dtb \
		kirkwood-dockstar.dtb \

arch/arm/boot/dts/kirkwood-dir665.dts

0 → 100644

+233 −0

Original line number	Diff line number	Diff line
		/*
		* Copyright (C) 2014 Claudio Leite <leitec@staticky.com>
		*
		* This file is licensed under the terms of the GNU General Public
		* License version 2. This program is licensed "as is" without any
		* warranty of any kind, whether express or implied.
		*/

		/dts-v1/;

		#include "kirkwood.dtsi"
		#include "kirkwood-6281.dtsi"

		/ {
		model = "D-Link DIR-665";
		compatible = "dlink,dir-665", "marvell,kirkwood-88f6281", "marvell,kirkwood";

		memory {
		device_type = "memory";
		reg = <0x00000000 0x8000000>; /* 128 MB */
		};

		chosen {
		bootargs = "console=ttyS0,115200n8 earlyprintk";
		stdout-path = &uart0;
		};

		mbus {
		pcie-controller {
		status = "okay";

		pcie@1,0 {
		status = "okay";
		};
		};
		};

		ocp@f1000000 {
		pinctrl: pin-controller@10000 {
		pinctrl-0 =< &pmx_led_usb
		&pmx_led_internet_blue
		&pmx_led_internet_amber
		&pmx_led_5g &pmx_led_status_blue
		&pmx_led_wps &pmx_led_status_amber
		&pmx_led_24g
		&pmx_btn_restart &pmx_btn_wps>;
		pinctrl-names = "default";

		pmx_led_usb: pmx-led-usb {
		marvell,pins = "mpp12";
		marvell,function = "gpio";
		};
		pmx_led_internet_blue: pmx-led-internet-blue {
		marvell,pins = "mpp42";
		marvell,function = "gpio";
		};
		pmx_led_internet_amber: pmx-led-internet-amber {
		marvell,pins = "mpp43";
		marvell,function = "gpio";
		};
		pmx_led_5g: pmx-led-5g {
		marvell,pins = "mpp44";
		marvell,function = "gpio";
		};
		pmx_led_status_blue: pmx-led-status-blue {
		marvell,pins = "mpp45";
		marvell,function = "gpio";
		};
		pmx_led_wps: pmx-led-wps {
		marvell,pins = "mpp47";
		marvell,function = "gpio";
		};
		pmx_led_status_amber: pmx-led-status-amber {
		marvell,pins = "mpp48";
		marvell,function = "gpio";
		};
		pmx_led_24g: pmx-led-24g {
		marvell,pins = "mpp49";
		marvell,function = "gpio";
		};
		pmx_btn_restart: pmx-btn-restart {
		marvell,pins = "mpp28";
		marvell,function = "gpio";
		};
		pmx_btn_wps: pmx-btn-wps {
		marvell,pins = "mpp46";
		marvell,function = "gpio";
		};
		};

		spi@10600 {
		status = "okay";
		m25p80@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "mxicy,mx25l12805d";
		spi-max-frequency = <50000000>;
		reg = <0>;

		partition@0 {
		label = "uboot";
		reg = <0x0 0x30000>;
		read-only;
		};

		partition@30000 {
		label = "nvram";
		reg = <0x30000 0x10000>;
		read-only;
		};

		partition@40000 {
		label = "kernel";
		reg = <0x40000 0x180000>;
		};

		partition@1c0000 {
		label = "rootfs";
		reg = <0x1c0000 0xe00000>;
		};

		cal_data: partition@fc0000 {
		label = "cal_data";
		reg = <0xfc0000 0x10000>;
		read-only;
		};

		partition@fd0000 {
		label = "lang_pack";
		reg = <0xfd0000 0x30000>;
		read-only;
		};
		};
		};

		serial@12000 {
		status = "okay";
		};

		i2c@11000 {
		status = "okay";
		};

		ehci@50000 {
		status = "okay";
		};
		};

		gpio-leds {
		compatible = "gpio-leds";

		blue-usb {
		label = "dir665:blue:usb";
		gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
		};
		blue-internet {
		/* Can only be turned on if the Internet
		* Ethernet port has Link
		*/
		label = "dir665:blue:internet";
		gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
		};
		amber-internet {
		label = "dir665:amber:internet";
		gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
		};
		blue-wifi5g {
		label = "dir665:blue:5g";
		gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
		};
		blue-status {
		label = "dir665:blue:status";
		gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
		};
		blue-wps {
		label = "dir665:blue:wps";
		gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
		};
		amber-status {
		label = "dir665:amber:status";
		gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
		};
		blue-24g {
		label = "dir665:blue:24g";
		gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
		};
		};

		gpio-keys {
		compatible = "gpio-keys";
		#address-cells = <1>;
		#size-cells = <0>;

		reset {
		label = "reset";
		linux,code = <KEY_RESTART>;
		gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
		};
		wps {
		label = "wps";
		linux,code = <KEY_WPS_BUTTON>;
		gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
		};
		};
		};

		&mdio {
		status = "okay";
		};

		/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
		* fixed speed and duplex. */
		&eth0 {
		status = "okay";

		ethernet0-port@0 {
		speed = <1000>;
		duplex = <1>;
		};
		};

		/* eth1 is connected to the switch as well. However DSA only supports a
		* single CPU port. So leave this port disabled to avoid confusion. */

		&eth1 {
		status = "disabled";
		};

		/* There is no battery on the boards, so the RTC does not keep time
		* when there is no power, making it useless. */
		&rtc {
		status = "disabled";
		};