Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 8be7ed14 authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [IPV4/IPV6]: Fix inet{,6} device initialization order.
  [TCP]: Use old definition of before
  [NETFILTER]: ebtables: don't compute gap before checking struct type
  [NETFILTER]: nf_nat: fix MASQUERADE crash on device down
  [NETFILTER]: New connection tracking is not EXPERIMENTAL anymore
  [NETFILTER]: Fix routing of REJECT target generated packets in output chain
  [NETFILTER]: compat offsets size change
  [SUNGEM]: PHY updates & pause fixes (#2)
  [X25]: proper prototype for x25_init_timers()
  [AF_NETLINK]: module_put cleanup
  [XFRM_USER]: avoid pointless void ** casts
  [NETFILTER] xt_hashlimit.c: fix typo
  [NET] drivers/net/loopback.c: convert to module_init()
  [PKTGEN]: Convert to kthread API.
  [NET]: ifb double-counts packets
parents d1398a6f 30c4cf57

drivers/net/Space.c

+0 −11
Original line number Diff line number Diff line
@@ -349,22 +349,11 @@ static void __init trif_probe2(int unit) 
#endif





/*

 *	The loopback device is global so it can be directly referenced

 *	by the network code. Also, it must be first on device list.

 */

extern int loopback_init(void);



/*  Statically configured drivers -- order matters here. */

static int __init net_olddevs_init(void)

{

	int num;



	if (loopback_init()) {

		printk(KERN_ERR "Network loopback device setup failed\n");

	}





#ifdef CONFIG_SBNI

	for (num = 0; num < 8; ++num)

		sbni_probe(num);

drivers/net/ifb.c

+2 −2
Original line number Diff line number Diff line
@@ -154,8 +154,8 @@ static int ifb_xmit(struct sk_buff *skb, struct net_device *dev) 
	int ret = 0;

	u32 from = G_TC_FROM(skb->tc_verd);



	stats->tx_packets++;

	stats->tx_bytes+=skb->len;

	stats->rx_packets++;

	stats->rx_bytes+=skb->len;



	if (!from || !skb->input_dev) {

dropped:

drivers/net/loopback.c

+3 −1
Original line number Diff line number Diff line
@@ -229,9 +229,11 @@ struct net_device loopback_dev = { 
};



/* Setup and register the loopback device. */

int __init loopback_init(void)

static int __init loopback_init(void)

{

	return register_netdev(&loopback_dev);

};



module_init(loopback_init);



EXPORT_SYMBOL(loopback_dev);

drivers/net/sungem.c

+2 −1
Original line number Diff line number Diff line
@@ -90,7 +90,8 @@ 


#define ADVERTISE_MASK	(SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | \

			 SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | \

			 SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full)

			 SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full | \

			 SUPPORTED_Pause | SUPPORTED_Autoneg)



#define DRV_NAME	"sungem"

#define DRV_VERSION	"0.98"

drivers/net/sungem_phy.c

+155 −24
Original line number Diff line number Diff line
@@ -3,10 +3,9 @@ 
 *

 * This file could be shared with other drivers.

 *

 * (c) 2002, Benjamin Herrenscmidt (benh@kernel.crashing.org)

 * (c) 2002-2007, Benjamin Herrenscmidt (benh@kernel.crashing.org)

 *

 * TODO:

 *  - Implement WOL

 *  - Add support for PHYs that provide an IRQ line

 *  - Eventually moved the entire polling state machine in

 *    there (out of the eth driver), so that it can easily be
@@ -152,6 +151,44 @@ static int bcm5221_suspend(struct mii_phy* phy) 
	return 0;

}



static int bcm5241_init(struct mii_phy* phy)

{

	u16 data;



	data = phy_read(phy, MII_BCM5221_TEST);

	phy_write(phy, MII_BCM5221_TEST,

		data | MII_BCM5221_TEST_ENABLE_SHADOWS);



	data = phy_read(phy, MII_BCM5221_SHDOW_AUX_STAT2);

	phy_write(phy, MII_BCM5221_SHDOW_AUX_STAT2,

		data | MII_BCM5221_SHDOW_AUX_STAT2_APD);



	data = phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);

	phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,

		data & ~MII_BCM5241_SHDOW_AUX_MODE4_STANDBYPWR);



	data = phy_read(phy, MII_BCM5221_TEST);

	phy_write(phy, MII_BCM5221_TEST,

		data & ~MII_BCM5221_TEST_ENABLE_SHADOWS);



	return 0;

}



static int bcm5241_suspend(struct mii_phy* phy)

{

	u16 data;



	data = phy_read(phy, MII_BCM5221_TEST);

	phy_write(phy, MII_BCM5221_TEST,

		data | MII_BCM5221_TEST_ENABLE_SHADOWS);



	data = phy_read(phy, MII_BCM5221_SHDOW_AUX_MODE4);

	phy_write(phy, MII_BCM5221_SHDOW_AUX_MODE4,

		  data | MII_BCM5241_SHDOW_AUX_MODE4_STANDBYPWR);



	return 0;

}



static int bcm5400_init(struct mii_phy* phy)

{

	u16 data;
@@ -373,6 +410,10 @@ static int bcm54xx_setup_aneg(struct mii_phy *phy, u32 advertise) 
		adv |= ADVERTISE_100HALF;

	if (advertise & ADVERTISED_100baseT_Full)

		adv |= ADVERTISE_100FULL;

	if (advertise & ADVERTISED_Pause)

		adv |= ADVERTISE_PAUSE_CAP;

	if (advertise & ADVERTISED_Asym_Pause)

		adv |= ADVERTISE_PAUSE_ASYM;

	phy_write(phy, MII_ADVERTISE, adv);



	/* Setup 1000BT advertise */
@@ -436,12 +477,15 @@ static int bcm54xx_read_link(struct mii_phy *phy) 
	    	val = phy_read(phy, MII_BCM5400_AUXSTATUS);

		link_mode = ((val & MII_BCM5400_AUXSTATUS_LINKMODE_MASK) >>

			     MII_BCM5400_AUXSTATUS_LINKMODE_SHIFT);

		phy->duplex = phy_BCM5400_link_table[link_mode][0] ? DUPLEX_FULL : DUPLEX_HALF;

		phy->duplex = phy_BCM5400_link_table[link_mode][0] ?

			DUPLEX_FULL : DUPLEX_HALF;

		phy->speed = phy_BCM5400_link_table[link_mode][2] ?

				SPEED_1000 :

				(phy_BCM5400_link_table[link_mode][1] ? SPEED_100 : SPEED_10);

				(phy_BCM5400_link_table[link_mode][1] ?

				 SPEED_100 : SPEED_10);

		val = phy_read(phy, MII_LPA);

		phy->pause = ((val & LPA_PAUSE) != 0);

		phy->pause = (phy->duplex == DUPLEX_FULL) &&

			((val & LPA_PAUSE) != 0);

	}

	/* On non-aneg, we assume what we put in BMCR is the speed,

	 * though magic-aneg shouldn't prevent this case from occurring
@@ -450,6 +494,28 @@ static int bcm54xx_read_link(struct mii_phy *phy) 
	return 0;

}



static int marvell88e1111_init(struct mii_phy* phy)

{

	u16 rev;



	/* magic init sequence for rev 0 */

	rev = phy_read(phy, MII_PHYSID2) & 0x000f;

	if (rev == 0) {

		phy_write(phy, 0x1d, 0x000a);

		phy_write(phy, 0x1e, 0x0821);



		phy_write(phy, 0x1d, 0x0006);

		phy_write(phy, 0x1e, 0x8600);



		phy_write(phy, 0x1d, 0x000b);

		phy_write(phy, 0x1e, 0x0100);



		phy_write(phy, 0x1d, 0x0004);

		phy_write(phy, 0x1e, 0x4850);

	}

	return 0;

}



static int marvell_setup_aneg(struct mii_phy *phy, u32 advertise)

{

	u16 ctl, adv;
@@ -471,6 +537,10 @@ static int marvell_setup_aneg(struct mii_phy *phy, u32 advertise) 
		adv |= ADVERTISE_100HALF;

	if (advertise & ADVERTISED_100baseT_Full)

		adv |= ADVERTISE_100FULL;

	if (advertise & ADVERTISED_Pause)

		adv |= ADVERTISE_PAUSE_CAP;

	if (advertise & ADVERTISED_Asym_Pause)

		adv |= ADVERTISE_PAUSE_ASYM;

	phy_write(phy, MII_ADVERTISE, adv);



	/* Setup 1000BT advertise & enable crossover detect
@@ -549,7 +619,7 @@ static int marvell_setup_forced(struct mii_phy *phy, int speed, int fd) 


static int marvell_read_link(struct mii_phy *phy)

{

	u16 status;

	u16 status, pmask;



	if (phy->autoneg) {

		status = phy_read(phy, MII_M1011_PHY_SPEC_STATUS);
@@ -565,7 +635,9 @@ static int marvell_read_link(struct mii_phy *phy) 
			phy->duplex = DUPLEX_FULL;

		else

			phy->duplex = DUPLEX_HALF;

		phy->pause = 0; /* XXX Check against spec ! */

		pmask = MII_M1011_PHY_SPEC_STATUS_TX_PAUSE |

			MII_M1011_PHY_SPEC_STATUS_RX_PAUSE;

		phy->pause = (status & pmask) == pmask;

	}

	/* On non-aneg, we assume what we put in BMCR is the speed,

	 * though magic-aneg shouldn't prevent this case from occurring
@@ -595,6 +667,10 @@ static int genmii_setup_aneg(struct mii_phy *phy, u32 advertise) 
		adv |= ADVERTISE_100HALF;

	if (advertise & ADVERTISED_100baseT_Full)

		adv |= ADVERTISE_100FULL;

	if (advertise & ADVERTISED_Pause)

		adv |= ADVERTISE_PAUSE_CAP;

	if (advertise & ADVERTISED_Asym_Pause)

		adv |= ADVERTISE_PAUSE_ASYM;

	phy_write(phy, MII_ADVERTISE, adv);



	/* Start/Restart aneg */
@@ -666,7 +742,8 @@ static int genmii_read_link(struct mii_phy *phy) 
			phy->speed = SPEED_100;

		else

			phy->speed = SPEED_10;

		phy->pause = 0;

		phy->pause = (phy->duplex == DUPLEX_FULL) &&

			((lpa & LPA_PAUSE) != 0);

	}

	/* On non-aneg, we assume what we put in BMCR is the speed,

	 * though magic-aneg shouldn't prevent this case from occurring
@@ -676,10 +753,18 @@ static int genmii_read_link(struct mii_phy *phy) 
}





#define MII_BASIC_FEATURES	(SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | \

#define MII_BASIC_FEATURES \

	(SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |	\

	 SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |	\

				 SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII)

#define MII_GBIT_FEATURES	(MII_BASIC_FEATURES | \

	 SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII |	\

	 SUPPORTED_Pause)



/* On gigabit capable PHYs, we advertise Pause support but not asym pause

 * support for now as I'm not sure it's supported and Darwin doesn't do

 * it neither. --BenH.

 */

#define MII_GBIT_FEATURES \

	(MII_BASIC_FEATURES |	\

	 SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full)



/* Broadcom BCM 5201 */
@@ -720,6 +805,24 @@ static struct mii_phy_def bcm5221_phy_def = { 
	.ops		= &bcm5221_phy_ops

};



/* Broadcom BCM 5241 */

static struct mii_phy_ops bcm5241_phy_ops = {

	.suspend	= bcm5241_suspend,

	.init		= bcm5241_init,

	.setup_aneg	= genmii_setup_aneg,

	.setup_forced	= genmii_setup_forced,

	.poll_link	= genmii_poll_link,

	.read_link	= genmii_read_link,

};

static struct mii_phy_def bcm5241_phy_def = {

	.phy_id		= 0x0143bc30,

	.phy_id_mask	= 0xfffffff0,

	.name		= "BCM5241",

	.features	= MII_BASIC_FEATURES,

	.magic_aneg	= 1,

	.ops		= &bcm5241_phy_ops

};



/* Broadcom BCM 5400 */

static struct mii_phy_ops bcm5400_phy_ops = {

	.init		= bcm5400_init,
@@ -854,11 +957,17 @@ static struct mii_phy_def bcm5462V_phy_def = { 
	.ops		= &bcm5462V_phy_ops

};



/* Marvell 88E1101 (Apple seem to deal with 2 different revs,

 * I masked out the 8 last bits to get both, but some specs

 * would be useful here) --BenH.

 */

static struct mii_phy_ops marvell_phy_ops = {

/* Marvell 88E1101 amd 88E1111 */

static struct mii_phy_ops marvell88e1101_phy_ops = {

	.suspend	= generic_suspend,

	.setup_aneg	= marvell_setup_aneg,

	.setup_forced	= marvell_setup_forced,

	.poll_link	= genmii_poll_link,

	.read_link	= marvell_read_link

};



static struct mii_phy_ops marvell88e1111_phy_ops = {

	.init		= marvell88e1111_init,

	.suspend	= generic_suspend,

	.setup_aneg	= marvell_setup_aneg,

	.setup_forced	= marvell_setup_forced,
@@ -866,13 +975,32 @@ static struct mii_phy_ops marvell_phy_ops = { 
	.read_link	= marvell_read_link

};



static struct mii_phy_def marvell_phy_def = {

	.phy_id		= 0x01410c00,

	.phy_id_mask	= 0xffffff00,

	.name		= "Marvell 88E1101",

/* two revs in darwin for the 88e1101 ... I could use a datasheet

 * to get the proper names...

 */

static struct mii_phy_def marvell88e1101v1_phy_def = {

	.phy_id		= 0x01410c20,

	.phy_id_mask	= 0xfffffff0,

	.name		= "Marvell 88E1101v1",

	.features	= MII_GBIT_FEATURES,

	.magic_aneg	= 1,

	.ops		= &marvell88e1101_phy_ops

};

static struct mii_phy_def marvell88e1101v2_phy_def = {

	.phy_id		= 0x01410c60,

	.phy_id_mask	= 0xfffffff0,

	.name		= "Marvell 88E1101v2",

	.features	= MII_GBIT_FEATURES,

	.magic_aneg	= 1,

	.ops		= &marvell88e1101_phy_ops

};

static struct mii_phy_def marvell88e1111_phy_def = {

	.phy_id		= 0x01410cc0,

	.phy_id_mask	= 0xfffffff0,

	.name		= "Marvell 88E1111",

	.features	= MII_GBIT_FEATURES,

	.magic_aneg	= 1,

	.ops		= &marvell_phy_ops

	.ops		= &marvell88e1111_phy_ops

};



/* Generic implementation for most 10/100 PHYs */
@@ -895,6 +1023,7 @@ static struct mii_phy_def genmii_phy_def = { 
static struct mii_phy_def* mii_phy_table[] = {

	&bcm5201_phy_def,

	&bcm5221_phy_def,

	&bcm5241_phy_def,

	&bcm5400_phy_def,

	&bcm5401_phy_def,

	&bcm5411_phy_def,
@@ -902,7 +1031,9 @@ static struct mii_phy_def* mii_phy_table[] = { 
	&bcm5421k2_phy_def,

	&bcm5461_phy_def,

	&bcm5462V_phy_def,

	&marvell_phy_def,

	&marvell88e1101v1_phy_def,

	&marvell88e1101v2_phy_def,

	&marvell88e1111_phy_def,

	&genmii_phy_def,

	NULL

};