Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 88dfc48f authored by Kavya Nunna's avatar Kavya Nunna
Browse files

ARM: dts: msm: Add pmic support for khaje qrd and atp 

Add pmic support for khaje qrd and atp platforms.

Change-Id: Ia41e69783fd33c00bd907b12d0c5ce0a75f2d44e
parent a186263b

qcom/khaje-atp.dtsi

+130 −0
Original line number Diff line number Diff line 
#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/iio/qcom,spmi-vadc.h>

#include <dt-bindings/input/input.h>

#include "khaje-pm7250b.dtsi"



&pm6125_gpios {

	eldo9_pin {
@@ -71,3 +74,130 @@ 
&usb_qmp_dp_phy {

	vdd-supply = <&vdda_usb_ss_dp_core>;

};



&pm6125_vadc {

	pinctrl-0 = <&camera_therm_default &emmc_therm_default &rf_pa1_therm_default>;



	rf_pa1_therm {

		reg = <ADC_GPIO4_PU2>;

		label = "rf_pa1_therm";

		qcom,ratiometric;

		qcom,hw-settle-time = <200>;

		qcom,pre-scaling = <1 1>;

	};

};



&pm6125_adc_tm {

	io-channels = <&pm6125_vadc ADC_AMUX_THM1_PU2>,

			<&pm6125_vadc ADC_AMUX_THM2_PU2>,

			<&pm6125_vadc ADC_XO_THERM_PU2>,

			<&pm6125_vadc ADC_GPIO4_PU2>;



	rf_pa1_therm {

		reg = <ADC_GPIO4_PU2>;

		qcom,ratiometric;

		qcom,hw-settle-time = <200>;

	};

};



&thermal_zones {

	rf-pa1-therm-usr {

		polling-delay-passive = <0>;

		polling-delay = <0>;

		thermal-governor = "user_space";

		thermal-sensors = <&pm6125_adc_tm ADC_GPIO4_PU2>;

		wake-capable-sensor;

		trips {

			active-config0 {

				temperature = <125000>;

				hysteresis = <1000>;

				type = "passive";

			};

		};

	};

};



&pm6125_gpios {



	rf_pa1_therm {

		rf_pa1_therm_default: rf_pa1_therm_default {

			pins = "gpio7";

			 bias-high-impedance;

		};

	};



	key_vol_up {

		key_vol_up_default: key_vol_up_default {

			pins = "gpio5";

			function = "normal";

			input-enable;

			bias-pull-up;

			power-source = <0>;

		};

	};

};



&soc {

	gpio_keys {

		compatible = "gpio-keys";

		label = "gpio-keys";



		pinctrl-names = "default";

		pinctrl-0 = <&key_vol_up_default>;



		vol_up {

			label = "volume_up";

			gpios = <&pm6125_gpios 5 GPIO_ACTIVE_LOW>;

			linux,input-type = <1>;

			linux,code = <KEY_VOLUMEUP>;

			linux,can-disable;

			debounce-interval = <15>;

			gpio-key,wakeup;

		};

	};

};



&pm7250b_charger {

	status = "ok";

	io-channels = <&pm7250b_vadc ADC_USB_IN_V_16>,

		      <&pm7250b_vadc ADC_USB_IN_I>,

		      <&pm7250b_vadc ADC_CHG_TEMP>,

		      <&pm7250b_vadc ADC_DIE_TEMP>,

		      <&pm7250b_vadc ADC_AMUX_THM3_PU2>,

		      <&pm7250b_vadc ADC_SBUx>,

		      <&pm7250b_vadc ADC_VPH_PWR>;

	io-channel-names = "usb_in_voltage",

			   "usb_in_current",

			   "chg_temp",

			   "die_temp",

			   "conn_temp",

			   "sbux_res",

			   "vph_voltage";

	qcom,batteryless-platform;

	qcom,sec-charger-config = <0>;

	qcom,auto-recharge-soc = <98>;

	qcom,step-charging-enable;

	qcom,sw-jeita-enable;

	qcom,charger-temp-max = <800>;

	qcom,suspend-input-on-debug-batt;

};



&pm7250b_qg {

	status = "ok";

	io-channels = <&pm7250b_vadc ADC_BAT_THERM_PU2>,

		      <&pm7250b_vadc ADC_BAT_ID_PU2>;

	io-channel-names = "batt-therm",

			   "batt-id";

	qcom,qg-iterm-ma = <150>;

	qcom,hold-soc-while-full;

	qcom,linearize-soc;

	qcom,cl-feedback-on;

};



&pm8008_8 {

	status = "disabled";

};



&pm8008_9 {

	status = "disabled";

};

qcom/khaje-idp-pm7250b.dtsi

+1 −1
Original line number Diff line number Diff line
@@ -11,7 +11,7 @@ 
&pm7250b_gpios {

	pm7250b_smb_int_default: pm7250b_smb_int_default {

		pins = "gpio6";

		function = "func1";

		function = "gpio";

		input-enable;

	 };

};

qcom/khaje-qrd-pm7250b.dtsi

+101 −0
Original line number Diff line number Diff line
@@ -13,3 +13,104 @@ 
	qcom,platform-en-gpio = <&pm7250b_gpios 5 0>;

	qcom,platform-bklight-en-gpio = <&pm7250b_gpios 1 0>;

};



&soc {

	qrd_batterydata: qcom,battery-data {

		qcom,batt-id-range-pct = <15>;

		#include "qg-batterydata-atl466271_3300mAh.dtsi"

	};

};



&tlmm {

	smb_int_default: smb_int_default {

		mux {

			pins = "gpio105";

			function = "gpio";

		};



		config {

			pins = "gpio105";

			bias-pull-up;

			input-enable;

		};

	};

};



&qupv3_se1_i2c {

	status = "ok";

	#include "smb1394.dtsi"

};



&smb1394 {

	pinctrl-names = "default";

	pinctrl-0 = <&smb_int_default>;

	interrupt-parent = <&tlmm>;

	interrupt-names = "smb1394";

	interrupts = <105 IRQ_TYPE_LEVEL_LOW>;

	status = "ok";

};



&smb1394_div2_cp_primary {

	io-channels = <&pm7250b_vadc ADC_AMUX_THM2_PU2>;

	qcom,parallel-input-mode = <1>;

	qcom,parallel-output-mode = <2>;

	status = "ok";

};



&pm7250b_charger {

	status = "ok";

	io-channels = <&pm7250b_vadc ADC_USB_IN_V_16>,

		      <&pm7250b_vadc ADC_USB_IN_I>,

		      <&pm7250b_vadc ADC_CHG_TEMP>,

		      <&pm7250b_vadc ADC_DIE_TEMP>,

		      <&pm7250b_vadc ADC_AMUX_THM3_PU2>,

		      <&pm7250b_vadc ADC_SBUx>,

		      <&pm7250b_vadc ADC_VPH_PWR>,

		      <&pm7250b_vadc ADC_AMUX_THM1_PU2>;

	io-channel-names = "usb_in_voltage",

			   "usb_in_current",

			   "chg_temp",

			   "die_temp",

			   "conn_temp",

			   "sbux_res",

			   "vph_voltage",

			   "skin_temp";

	qcom,battery-data = <&qrd_batterydata>;

	qcom,sec-charger-config = <1>;

	qcom,auto-recharge-soc = <98>;

	qcom,step-charging-enable;

	qcom,sw-jeita-enable;

	qcom,charger-temp-max = <800>;

	qcom,smb-temp-max = <800>;

	qcom,suspend-input-on-debug-batt;

	qcom,fcc-stepping-enable;

	qcom,fcc-step-delay-ms = <100>;

	qcom,fcc-step-size-ua = <100000>;

	qcom,smb-internal-pull-kohm = <0>;

	qcom,en-skin-therm-mitigation;

	qcom,thermal-mitigation = <8000000 7500000 7000000 6500000 6000000 5500000

			5000000 4500000 4000000 3500000 3000000 2500000 2000000 1500000

			1000000 500000>;

};



&pm7250b_qg {

	status = "ok";

	io-channels = <&pm7250b_vadc ADC_BAT_THERM_PU2>,

		      <&pm7250b_vadc ADC_BAT_ID_PU2>;

	io-channel-names = "batt-therm",

			   "batt-id";

	qcom,qg-iterm-ma = <150>;

	qcom,hold-soc-while-full;

	qcom,linearize-soc;

	qcom,cl-feedback-on;

	qcom,tcss-enable;

	qcom,fvss-enable;

	qcom,fvss-vbatt-mv = <3500>;

	qcom,bass-enable;

	qcom,vbatt-cutoff-mv = <3400>;

	qcom,vbatt-low-mv = <3500>;

	qcom,vbatt-low-cold-mv = <3800>;

	qcom,vbatt-empty-mv = <3200>;

	qcom,vbatt-empty-cold-mv = <3100>;

	qcom,use-cp-iin-sns;

};

qcom/khaje-qrd.dtsi

+0 −20
Original line number Diff line number Diff line
@@ -6,11 +6,6 @@ 
#include "bengal-audio-overlay.dtsi"

#include "khaje-sde-display.dtsi"



&qupv3_se1_i2c {

	status = "ok";

	#include "smb1355.dtsi"

};



&pm6125_gpios {

	key_vol_up {

		key_vol_up_default: key_vol_up_default {
@@ -189,21 +184,6 @@ 
	status = "ok";

};



&tlmm {

	smb_int_default: smb_int_default {

		mux {

			pins = "gpio105";

			function = "gpio";

		};



		config {

			pins = "gpio105";

			bias-pull-up;

			input-enable;

		};

	};

};



&ufsphy_mem {

	compatible = "qcom,ufs-phy-qmp-v4";

qcom/khaje.dtsi

+1 −1
Original line number Diff line number Diff line
@@ -3402,7 +3402,7 @@ tpdm_turing_llm: tpdm@8861000 { 
&L2P {

	regulator-min-microvolt = <950000>;

	regulator-max-microvolt = <1150000>;

	qcom,min-dropout-voltage = <96000>;

	qcom,min-dropout-voltage = <88000>;

};



&L3P {