Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 853d2694 authored by Arun Kumar K's avatar Arun Kumar K Committed by Kukjin Kim
Browse files

ARM: dts: add dts file for exynos5800-peach-pi board 



Adds support for google peach-pi board having the
Exynos5800 SoC.

Signed-off-by: default avatarArun Kumar K <arun.kk@samsung.com>
Signed-off-by: default avatarDoug Anderson <dianders@chromium.org>
Reviewed-by: default avatarTomasz Figa <t.figa@samsung.com>
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
parent 2ccd0b53

arch/arm/boot/dts/Makefile

+2 −1
Original line number Diff line number Diff line
@@ -78,7 +78,8 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ 
	exynos5420-peach-pit.dtb \

	exynos5420-smdk5420.dtb \

	exynos5440-sd5v1.dtb \

	exynos5440-ssdk5440.dtb

	exynos5440-ssdk5440.dtb \

	exynos5800-peach-pi.dtb

dtb-$(CONFIG_ARCH_HI3xxx) += hi3620-hi4511.dtb

dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \

	ecx-2000.dtb

arch/arm/boot/dts/exynos5800-peach-pi.dts

0 → 100644
+144 −0
Original line number Diff line number Diff line 
/*

 * Google Peach Pi Rev 10+ board device tree source

 *

 * Copyright (c) 2014 Google, Inc

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 as

 * published by the Free Software Foundation.

 */



/dts-v1/;

#include <dt-bindings/input/input.h>

#include <dt-bindings/gpio/gpio.h>

#include "exynos5800.dtsi"



/ {

	model = "Google Peach Pi Rev 10+";



	compatible = "google,pi-rev16",

		"google,pi-rev15", "google,pi-rev14",

		"google,pi-rev13", "google,pi-rev12",

		"google,pi-rev11", "google,pi-rev10",

		"google,pi", "google,peach", "samsung,exynos5800",

		"samsung,exynos5";



	memory {

		reg = <0x20000000 0x80000000>;

	};



	fixed-rate-clocks {

		oscclk {

			compatible = "samsung,exynos5420-oscclk";

			clock-frequency = <24000000>;

		};

	};



	gpio-keys {

		compatible = "gpio-keys";



		pinctrl-names = "default";

		pinctrl-0 = <&power_key_irq>;



		power {

			label = "Power";

			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;

			linux,code = <KEY_POWER>;

			gpio-key,wakeup;

		};

	};



	backlight {

		compatible = "pwm-backlight";

		pwms = <&pwm 0 1000000 0>;

		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;

		default-brightness-level = <7>;

		pinctrl-0 = <&pwm0_out>;

		pinctrl-names = "default";

	};

};



&pinctrl_0 {

	tpm_irq: tpm-irq {

		samsung,pins = "gpx1-0";

		samsung,pin-function = <0>;

		samsung,pin-pud = <0>;

		samsung,pin-drv = <0>;

	};



	power_key_irq: power-key-irq {

		samsung,pins = "gpx1-2";

		samsung,pin-function = <0>;

		samsung,pin-pud = <0>;

		samsung,pin-drv = <0>;

	};

};



&rtc {

	status = "okay";

};



&uart_3 {

	status = "okay";

};



&mmc_0 {

	status = "okay";

	num-slots = <1>;

	broken-cd;

	caps2-mmc-hs200-1_8v;

	supports-highspeed;

	non-removable;

	card-detect-delay = <200>;

	clock-frequency = <400000000>;

	samsung,dw-mshc-ciu-div = <3>;

	samsung,dw-mshc-sdr-timing = <0 4>;

	samsung,dw-mshc-ddr-timing = <0 2>;

	pinctrl-names = "default";

	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;



	slot@0 {

		reg = <0>;

		bus-width = <8>;

	};

};



&mmc_2 {

	status = "okay";

	num-slots = <1>;

	supports-highspeed;

	card-detect-delay = <200>;

	clock-frequency = <400000000>;

	samsung,dw-mshc-ciu-div = <3>;

	samsung,dw-mshc-sdr-timing = <2 3>;

	samsung,dw-mshc-ddr-timing = <1 2>;

	pinctrl-names = "default";

	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;



	slot@0 {

		reg = <0>;

		bus-width = <4>;

	};

};



&hsi2c_9 {

	status = "okay";

	clock-frequency = <400000>;



	tpm@20 {

		compatible = "infineon,slb9645tt";

		reg = <0x20>;

		/* Unused irq; but still need to configure the pins */

		pinctrl-names = "default";

		pinctrl-0 = <&tpm_irq>;

	};

};



/*

 * Use longest HW watchdog in SoC (32 seconds) since the hardware

 * watchdog provides no debugging information (compared to soft/hard

 * lockup detectors) and so should be last resort.

 */

&watchdog {

	timeout-sec = <32>;

};