ide: Kconfig face-lift (842c19ad) · Commits · e / devices / android_kernel_oneplus_sm7250

drivers/ide/Kconfig

+52 −50

Original line number	Original line	Diff line number	Diff line
	@@ -359,17 +359,16 @@ config BLK_DEV_IDEPNP
	would like the kernel to automatically detect and activate		would like the kernel to automatically detect and activate
	it, say Y here.		it, say Y here.

			if PCI

			comment "PCI IDE chipsets support"

	config BLK_DEV_IDEPCI		config BLK_DEV_IDEPCI
	bool "PCI IDE chipset support" if PCI		bool
	default BLK_DEV_IDEDMA_PMAC if PPC_PMAC && BLK_DEV_IDEDMA_PMAC
	help
	Say Y here for PCI systems which use IDE drive(s).
	This option helps the IDE driver to automatically detect and
	configure all PCI-based IDE interfaces in your system.

	config IDEPCI_SHARE_IRQ		config IDEPCI_SHARE_IRQ
	bool "Sharing PCI IDE interrupts support"		bool "Sharing PCI IDE interrupts support"
	depends on PCI && BLK_DEV_IDEPCI		depends on BLK_DEV_IDEPCI
	help		help
	Some ATA/IDE chipsets have hardware support which allows for		Some ATA/IDE chipsets have hardware support which allows for
	sharing a single IRQ with other cards. To enable support for		sharing a single IRQ with other cards. To enable support for
	@@ -379,11 +378,11 @@ config IDEPCI_SHARE_IRQ
	If unsure, say N.		If unsure, say N.

	config IDEPCI_PCIBUS_ORDER		config IDEPCI_PCIBUS_ORDER
	def_bool PCI && BLK_DEV_IDE=y && BLK_DEV_IDEPCI		def_bool BLK_DEV_IDE=y && BLK_DEV_IDEPCI

	config BLK_DEV_OFFBOARD		config BLK_DEV_OFFBOARD
	bool "Boot off-board chipsets first support"		bool "Boot off-board chipsets first support"
	depends on PCI && BLK_DEV_IDEPCI		depends on BLK_DEV_IDEPCI
	help		help
	Normally, IDE controllers built into the motherboard (on-board		Normally, IDE controllers built into the motherboard (on-board
	controllers) are assigned to ide0 and ide1 while those on add-in PCI		controllers) are assigned to ide0 and ide1 while those on add-in PCI
	@@ -406,21 +405,23 @@ config BLK_DEV_OFFBOARD

	config BLK_DEV_GENERIC		config BLK_DEV_GENERIC
	tristate "Generic PCI IDE Chipset Support"		tristate "Generic PCI IDE Chipset Support"
	depends on BLK_DEV_IDEPCI		select BLK_DEV_IDEPCI
	help		help
	This option provides generic support for various PCI IDE Chipsets		This option provides generic support for various PCI IDE Chipsets
	which otherwise might not be supported.		which otherwise might not be supported.

	config BLK_DEV_OPTI621		config BLK_DEV_OPTI621
	tristate "OPTi 82C621 chipset enhanced support (EXPERIMENTAL)"		tristate "OPTi 82C621 chipset enhanced support (EXPERIMENTAL)"
	depends on PCI && BLK_DEV_IDEPCI && EXPERIMENTAL		depends on EXPERIMENTAL
			select BLK_DEV_IDEPCI
	help		help
	This is a driver for the OPTi 82C621 EIDE controller.		This is a driver for the OPTi 82C621 EIDE controller.
	Please read the comments at the top of <file:drivers/ide/pci/opti621.c>.		Please read the comments at the top of <file:drivers/ide/pci/opti621.c>.

	config BLK_DEV_RZ1000		config BLK_DEV_RZ1000
	tristate "RZ1000 chipset bugfix/support"		tristate "RZ1000 chipset bugfix/support"
	depends on PCI && BLK_DEV_IDEPCI && X86		depends on X86
			select BLK_DEV_IDEPCI
	help		help
	The PC-Technologies RZ1000 IDE chip is used on many common 486 and		The PC-Technologies RZ1000 IDE chip is used on many common 486 and
	Pentium motherboards, usually along with the "Neptune" chipset.		Pentium motherboards, usually along with the "Neptune" chipset.
	@@ -431,35 +432,21 @@ config BLK_DEV_RZ1000
	things will operate 100% reliably.		things will operate 100% reliably.

	config BLK_DEV_IDEDMA_PCI		config BLK_DEV_IDEDMA_PCI
	bool "Generic PCI bus-master DMA support"		bool
	depends on PCI && BLK_DEV_IDEPCI		select BLK_DEV_IDEPCI
	---help---
	If your PCI system uses IDE drive(s) (as opposed to SCSI, say) and
	is capable of bus-master DMA operation (most Pentium PCI systems),
	you will want to say Y here to reduce CPU overhead. You can then use
	the "hdparm" utility to enable DMA for drives for which it was not
	enabled automatically. By default, DMA is not enabled automatically
	for these drives, but you can change that by saying Y to the
	following question "Use DMA by default when available". You can get
	the latest version of the hdparm utility from
	<ftp://ibiblio.org/pub/Linux/system/hardware/>.

	Read the comments at the beginning of <file:drivers/ide/ide-dma.c>
	and the file <file:Documentation/ide.txt> for more information.

	It is safe to say Y to this question.

	if BLK_DEV_IDEDMA_PCI

	config BLK_DEV_IDEDMA_FORCED		config BLK_DEV_IDEDMA_FORCED
	bool "Force enable legacy 2.0.X HOSTS to use DMA"		bool "Force enable legacy 2.0.X HOSTS to use DMA"
			depends on BLK_DEV_IDEDMA_PCI
	help		help
	This is an old piece of lost code from Linux 2.0 Kernels.		This is an old piece of lost code from Linux 2.0 Kernels.

	Generally say N here.		Generally say N here.

			# TODO: remove it
	config IDEDMA_ONLYDISK		config IDEDMA_ONLYDISK
	bool "Enable DMA only for disks "		bool "Enable DMA only for disks "
			depends on BLK_DEV_IDEDMA_PCI
	help		help
	This is used if you know your ATAPI Devices are going to fail DMA		This is used if you know your ATAPI Devices are going to fail DMA
	Transfers.		Transfers.
	@@ -468,6 +455,7 @@ config IDEDMA_ONLYDISK

	config BLK_DEV_AEC62XX		config BLK_DEV_AEC62XX
	tristate "AEC62XX chipset support"		tristate "AEC62XX chipset support"
			select BLK_DEV_IDEDMA_PCI
	help		help
	This driver adds explicit support for Acard AEC62xx (Artop ATP8xx)		This driver adds explicit support for Acard AEC62xx (Artop ATP8xx)
	IDE controllers. This allows the kernel to change PIO, DMA and UDMA		IDE controllers. This allows the kernel to change PIO, DMA and UDMA
	@@ -475,6 +463,7 @@ config BLK_DEV_AEC62XX

	config BLK_DEV_ALI15X3		config BLK_DEV_ALI15X3
	tristate "ALI M15x3 chipset support"		tristate "ALI M15x3 chipset support"
			select BLK_DEV_IDEDMA_PCI
	help		help
	This driver ensures (U)DMA support for ALI 1533, 1543 and 1543C		This driver ensures (U)DMA support for ALI 1533, 1543 and 1543C
	onboard chipsets. It also tests for Simplex mode and enables		onboard chipsets. It also tests for Simplex mode and enables
	@@ -503,6 +492,7 @@ config WDC_ALI15X3

	config BLK_DEV_AMD74XX		config BLK_DEV_AMD74XX
	tristate "AMD and nVidia IDE support"		tristate "AMD and nVidia IDE support"
			select BLK_DEV_IDEDMA_PCI
	help		help
	This driver adds explicit support for AMD-7xx and AMD-8111 chips		This driver adds explicit support for AMD-7xx and AMD-8111 chips
	and also for the nVidia nForce chip. This allows the kernel to		and also for the nVidia nForce chip. This allows the kernel to
	@@ -512,6 +502,7 @@ config BLK_DEV_AMD74XX
	config BLK_DEV_ATIIXP		config BLK_DEV_ATIIXP
	tristate "ATI IXP chipset IDE support"		tristate "ATI IXP chipset IDE support"
	depends on X86		depends on X86
			select BLK_DEV_IDEDMA_PCI
	help		help
	This driver adds explicit support for ATI IXP chipset.		This driver adds explicit support for ATI IXP chipset.
	This allows the kernel to change PIO, DMA and UDMA speeds		This allows the kernel to change PIO, DMA and UDMA speeds
	@@ -521,18 +512,21 @@ config BLK_DEV_ATIIXP

	config BLK_DEV_CMD64X		config BLK_DEV_CMD64X
	tristate "CMD64{3\|6\|8\|9} chipset support"		tristate "CMD64{3\|6\|8\|9} chipset support"
			select BLK_DEV_IDEDMA_PCI
	help		help
	Say Y here if you have an IDE controller which uses any of these		Say Y here if you have an IDE controller which uses any of these
	chipsets: CMD643, CMD646, or CMD648.		chipsets: CMD643, CMD646, or CMD648.

	config BLK_DEV_TRIFLEX		config BLK_DEV_TRIFLEX
	tristate "Compaq Triflex IDE support"		tristate "Compaq Triflex IDE support"
			select BLK_DEV_IDEDMA_PCI
	help		help
	Say Y here if you have a Compaq Triflex IDE controller, such		Say Y here if you have a Compaq Triflex IDE controller, such
	as those commonly found on Compaq Pentium-Pro systems		as those commonly found on Compaq Pentium-Pro systems

	config BLK_DEV_CY82C693		config BLK_DEV_CY82C693
	tristate "CY82C693 chipset support"		tristate "CY82C693 chipset support"
			select BLK_DEV_IDEDMA_PCI
	help		help
	This driver adds detection and support for the CY82C693 chipset		This driver adds detection and support for the CY82C693 chipset
	used on Digital's PC-Alpha 164SX boards.		used on Digital's PC-Alpha 164SX boards.
	@@ -543,6 +537,7 @@ config BLK_DEV_CY82C693
	config BLK_DEV_CS5520		config BLK_DEV_CS5520
	tristate "Cyrix CS5510/20 MediaGX chipset support (VERY EXPERIMENTAL)"		tristate "Cyrix CS5510/20 MediaGX chipset support (VERY EXPERIMENTAL)"
	depends on EXPERIMENTAL		depends on EXPERIMENTAL
			select BLK_DEV_IDEDMA_PCI
	help		help
	Include support for PIO tuning and virtual DMA on the Cyrix MediaGX		Include support for PIO tuning and virtual DMA on the Cyrix MediaGX
	5510/5520 chipset. This will automatically be detected and		5510/5520 chipset. This will automatically be detected and
	@@ -552,6 +547,7 @@ config BLK_DEV_CS5520

	config BLK_DEV_CS5530		config BLK_DEV_CS5530
	tristate "Cyrix/National Semiconductor CS5530 MediaGX chipset support"		tristate "Cyrix/National Semiconductor CS5530 MediaGX chipset support"
			select BLK_DEV_IDEDMA_PCI
	help		help
	Include support for UDMA on the Cyrix MediaGX 5530 chipset. This		Include support for UDMA on the Cyrix MediaGX 5530 chipset. This
	will automatically be detected and configured if found.		will automatically be detected and configured if found.
	@@ -561,6 +557,7 @@ config BLK_DEV_CS5530
	config BLK_DEV_CS5535		config BLK_DEV_CS5535
	tristate "AMD CS5535 chipset support"		tristate "AMD CS5535 chipset support"
	depends on X86 && !X86_64		depends on X86 && !X86_64
			select BLK_DEV_IDEDMA_PCI
	help		help
	Include support for UDMA on the NSC/AMD CS5535 companion chipset.		Include support for UDMA on the NSC/AMD CS5535 companion chipset.
	This will automatically be detected and configured if found.		This will automatically be detected and configured if found.
	@@ -569,6 +566,7 @@ config BLK_DEV_CS5535

	config BLK_DEV_HPT34X		config BLK_DEV_HPT34X
	tristate "HPT34X chipset support"		tristate "HPT34X chipset support"
			select BLK_DEV_IDEDMA_PCI
	help		help
	This driver adds up to 4 more EIDE devices sharing a single		This driver adds up to 4 more EIDE devices sharing a single
	interrupt. The HPT343 chipset in its current form is a non-bootable		interrupt. The HPT343 chipset in its current form is a non-bootable
	@@ -589,7 +587,8 @@ config HPT34X_AUTODMA

	config BLK_DEV_HPT366		config BLK_DEV_HPT366
	tristate "HPT36X/37X chipset support"		tristate "HPT36X/37X chipset support"
	---help---		select BLK_DEV_IDEDMA_PCI
			help
	HPT366 is an Ultra DMA chipset for ATA-66.		HPT366 is an Ultra DMA chipset for ATA-66.
	HPT368 is an Ultra DMA chipset for ATA-66 RAID Based.		HPT368 is an Ultra DMA chipset for ATA-66 RAID Based.
	HPT370 is an Ultra DMA chipset for ATA-100.		HPT370 is an Ultra DMA chipset for ATA-100.
	@@ -613,18 +612,21 @@ config BLK_DEV_HPT366

	config BLK_DEV_JMICRON		config BLK_DEV_JMICRON
	tristate "JMicron JMB36x support"		tristate "JMicron JMB36x support"
			select BLK_DEV_IDEDMA_PCI
	help		help
	Basic support for the JMicron ATA controllers. For full support		Basic support for the JMicron ATA controllers. For full support
	use the libata drivers.		use the libata drivers.

	config BLK_DEV_SC1200		config BLK_DEV_SC1200
	tristate "National SCx200 chipset support"		tristate "National SCx200 chipset support"
			select BLK_DEV_IDEDMA_PCI
	help		help
	This driver adds support for the built in IDE on the National		This driver adds support for the built in IDE on the National
	SCx200 series of embedded x86 "Geode" systems		SCx200 series of embedded x86 "Geode" systems

	config BLK_DEV_PIIX		config BLK_DEV_PIIX
	tristate "Intel PIIXn chipsets support"		tristate "Intel PIIXn chipsets support"
			select BLK_DEV_IDEDMA_PCI
	help		help
	This driver adds explicit support for Intel PIIX and ICH chips		This driver adds explicit support for Intel PIIX and ICH chips
	and also for the Efar Victory66 (slc90e66) chip. This allows		and also for the Efar Victory66 (slc90e66) chip. This allows
	@@ -633,17 +635,20 @@ config BLK_DEV_PIIX

	config BLK_DEV_IT8213		config BLK_DEV_IT8213
	tristate "IT8213 IDE support"		tristate "IT8213 IDE support"
			select BLK_DEV_IDEDMA_PCI
	help		help
	This driver adds support for the ITE 8213 IDE controller.		This driver adds support for the ITE 8213 IDE controller.

	config BLK_DEV_IT821X		config BLK_DEV_IT821X
	tristate "IT821X IDE support"		tristate "IT821X IDE support"
			select BLK_DEV_IDEDMA_PCI
	help		help
	This driver adds support for the ITE 8211 IDE controller and the		This driver adds support for the ITE 8211 IDE controller and the
	IT 8212 IDE RAID controller in both RAID and pass-through mode.		IT 8212 IDE RAID controller in both RAID and pass-through mode.

	config BLK_DEV_NS87415		config BLK_DEV_NS87415
	tristate "NS87415 chipset support"		tristate "NS87415 chipset support"
			select BLK_DEV_IDEDMA_PCI
	help		help
	This driver adds detection and support for the NS87415 chip		This driver adds detection and support for the NS87415 chip
	(used mainly on SPARC64 and PA-RISC machines).		(used mainly on SPARC64 and PA-RISC machines).
	@@ -652,6 +657,7 @@ config BLK_DEV_NS87415

	config BLK_DEV_PDC202XX_OLD		config BLK_DEV_PDC202XX_OLD
	tristate "PROMISE PDC202{46\|62\|65\|67} support"		tristate "PROMISE PDC202{46\|62\|65\|67} support"
			select BLK_DEV_IDEDMA_PCI
	help		help
	Promise Ultra33 or PDC20246		Promise Ultra33 or PDC20246
	Promise Ultra66 or PDC20262		Promise Ultra66 or PDC20262
	@@ -693,9 +699,11 @@ config PDC202XX_BURST

	config BLK_DEV_PDC202XX_NEW		config BLK_DEV_PDC202XX_NEW
	tristate "PROMISE PDC202{68\|69\|70\|71\|75\|76\|77} support"		tristate "PROMISE PDC202{68\|69\|70\|71\|75\|76\|77} support"
			select BLK_DEV_IDEDMA_PCI

	config BLK_DEV_SVWKS		config BLK_DEV_SVWKS
	tristate "ServerWorks OSB4/CSB5/CSB6 chipsets support"		tristate "ServerWorks OSB4/CSB5/CSB6 chipsets support"
			select BLK_DEV_IDEDMA_PCI
	help		help
	This driver adds PIO/(U)DMA support for the ServerWorks OSB4/CSB5		This driver adds PIO/(U)DMA support for the ServerWorks OSB4/CSB5
	chipsets.		chipsets.
	@@ -704,6 +712,7 @@ config BLK_DEV_SGIIOC4
	tristate "Silicon Graphics IOC4 chipset ATA/ATAPI support"		tristate "Silicon Graphics IOC4 chipset ATA/ATAPI support"
	depends on (IA64_SGI_SN2 \|\| IA64_GENERIC) && SGI_IOC4		depends on (IA64_SGI_SN2 \|\| IA64_GENERIC) && SGI_IOC4
	select IDEPCI_SHARE_IRQ		select IDEPCI_SHARE_IRQ
			select BLK_DEV_IDEDMA_PCI
	help		help
	This driver adds PIO & MultiMode DMA-2 support for the SGI IOC4		This driver adds PIO & MultiMode DMA-2 support for the SGI IOC4
	chipset, which has one channel and can support two devices.		chipset, which has one channel and can support two devices.
	@@ -711,6 +720,7 @@ config BLK_DEV_SGIIOC4

	config BLK_DEV_SIIMAGE		config BLK_DEV_SIIMAGE
	tristate "Silicon Image chipset support"		tristate "Silicon Image chipset support"
			select BLK_DEV_IDEDMA_PCI
	help		help
	This driver adds PIO/(U)DMA support for the SI CMD680 and SII		This driver adds PIO/(U)DMA support for the SI CMD680 and SII
	3112 (Serial ATA) chips.		3112 (Serial ATA) chips.
	@@ -718,7 +728,8 @@ config BLK_DEV_SIIMAGE
	config BLK_DEV_SIS5513		config BLK_DEV_SIS5513
	tristate "SiS5513 chipset support"		tristate "SiS5513 chipset support"
	depends on X86		depends on X86
	---help---		select BLK_DEV_IDEDMA_PCI
			help
	This driver ensures (U)DMA support for SIS5513 chipset family based		This driver ensures (U)DMA support for SIS5513 chipset family based
	mainboards.		mainboards.

	@@ -737,6 +748,7 @@ config BLK_DEV_SIS5513
	config BLK_DEV_SL82C105		config BLK_DEV_SL82C105
	tristate "Winbond SL82c105 support"		tristate "Winbond SL82c105 support"
	depends on (PPC \|\| ARM)		depends on (PPC \|\| ARM)
			select BLK_DEV_IDEDMA_PCI
	help		help
	If you have a Winbond SL82c105 IDE controller, say Y here to enable		If you have a Winbond SL82c105 IDE controller, say Y here to enable
	special configuration for this chip. This is common on various CHRP		special configuration for this chip. This is common on various CHRP
	@@ -744,6 +756,7 @@ config BLK_DEV_SL82C105

	config BLK_DEV_SLC90E66		config BLK_DEV_SLC90E66
	tristate "SLC90E66 chipset support"		tristate "SLC90E66 chipset support"
			select BLK_DEV_IDEDMA_PCI
	help		help
	This driver ensures (U)DMA support for Victory66 SouthBridges for		This driver ensures (U)DMA support for Victory66 SouthBridges for
	SMsC with Intel NorthBridges. This is an Ultra66 based chipset.		SMsC with Intel NorthBridges. This is an Ultra66 based chipset.
	@@ -759,6 +772,7 @@ config BLK_DEV_SLC90E66

	config BLK_DEV_TRM290		config BLK_DEV_TRM290
	tristate "Tekram TRM290 chipset support"		tristate "Tekram TRM290 chipset support"
			select BLK_DEV_IDEDMA_PCI
	help		help
	This driver adds support for bus master DMA transfers		This driver adds support for bus master DMA transfers
	using the Tekram TRM290 PCI IDE chip. Volunteers are		using the Tekram TRM290 PCI IDE chip. Volunteers are
	@@ -767,6 +781,7 @@ config BLK_DEV_TRM290

	config BLK_DEV_VIA82CXXX		config BLK_DEV_VIA82CXXX
	tristate "VIA82CXXX chipset support"		tristate "VIA82CXXX chipset support"
			select BLK_DEV_IDEDMA_PCI
	help		help
	This driver adds explicit support for VIA BusMastering IDE chips.		This driver adds explicit support for VIA BusMastering IDE chips.
	This allows the kernel to change PIO, DMA and UDMA speeds and to		This allows the kernel to change PIO, DMA and UDMA speeds and to
	@@ -774,12 +789,14 @@ config BLK_DEV_VIA82CXXX

	config BLK_DEV_TC86C001		config BLK_DEV_TC86C001
	tristate "Toshiba TC86C001 support"		tristate "Toshiba TC86C001 support"
			select BLK_DEV_IDEDMA_PCI
	help		help
	This driver adds support for Toshiba TC86C001 GOKU-S chip.		This driver adds support for Toshiba TC86C001 GOKU-S chip.

	config BLK_DEV_CELLEB		config BLK_DEV_CELLEB
	tristate "Toshiba's Cell Reference Set IDE support"		tristate "Toshiba's Cell Reference Set IDE support"
	depends on PPC_CELLEB		depends on PPC_CELLEB
			select BLK_DEV_IDEDMA_PCI
	help		help
	This driver provides support for the built-in IDE controller on		This driver provides support for the built-in IDE controller on
	Toshiba Cell Reference Board.		Toshiba Cell Reference Board.
	@@ -993,24 +1010,9 @@ config IDE_EXT_DIRECT
	endchoice		endchoice

	# no isa -> no vlb		# no isa -> no vlb
	config IDE_CHIPSETS		if ISA
	bool "Other IDE chipset support"
	depends on ISA
	---help---
	Say Y here if you want to include enhanced support for various IDE
	interface chipsets used on motherboards and add-on cards. You can
	then pick your particular IDE chip from among the following options.
	This enhanced support may be necessary for Linux to be able to
	access the 3rd/4th drives in some systems. It may also enable
	setting of higher speed I/O rates to improve system performance with
	these chipsets. Most of these also require special kernel boot
	parameters to actually turn on the support at runtime; you can find
	a list of these in the file <file:Documentation/ide.txt>.

	People with SCSI-only systems can say N here.

	if IDE_CHIPSETS

			comment "Other IDE chipsets support"
	comment "Note: most of these also require special kernel boot parameters"		comment "Note: most of these also require special kernel boot parameters"

	config BLK_DEV_4DRIVES		config BLK_DEV_4DRIVES