Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 8113ba91 authored by Shiraz Hashim's avatar Shiraz Hashim Committed by Viresh Kumar
Browse files

ARM: SPEAr: DT: Update device nodes 



This patch adds multiple device nodes for SPEAr machines and boards.

Signed-off-by: default avatarBhavna Yadav <bhavna.yadav@st.com>
Signed-off-by: default avatarDeepak Sikri <deepak.sikri@st.com>
Signed-off-by: default avatarRajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: default avatarShiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: default avatarVijay Kumar Mishra <vijay.kumar@st.com>
Signed-off-by: default avatarVipin Kumar <vipin.kumar@st.com>
Signed-off-by: default avatarVipul Kumar Samar <vipulkumar.samar@st.com>
Signed-off-by: default avatarViresh Kumar <viresh.kumar@linaro.org>
parent 7bceba83

arch/arm/boot/dts/spear1310-evb.dts

+83 −0
Original line number Diff line number Diff line
@@ -147,6 +147,20 @@ 
			};

		};



		gpio_keys {

			compatible = "gpio-keys";

			#address-cells = <1>;

			#size-cells = <0>;



			button@1 {

				label = "wakeup";

				linux,code = <0x100>;

				gpios = <&gpio0 7 0x4>;

				debounce-interval = <20>;

				gpio-key,wakeup = <1>;

			};

		};



		gmac0: eth@e2000000 {

			phy-mode = "gmii";

			status = "okay";
@@ -330,6 +344,75 @@ 


			spi0: spi@e0100000 {

				status = "okay";

				num-cs = <3>;

				cs-gpios = <&gpio1 7 0>, <&spics 0>, <&spics 1>;



				stmpe610@0 {

					compatible = "st,stmpe610";

					reg = <0>;

					#address-cells = <1>;

					#size-cells = <0>;

					spi-max-frequency = <1000000>;

					spi-cpha;

					pl022,hierarchy = <0>;

					pl022,interface = <0>;

					pl022,slave-tx-disable;

					pl022,com-mode = <0>;

					pl022,rx-level-trig = <0>;

					pl022,tx-level-trig = <0>;

					pl022,ctrl-len = <0x7>;

					pl022,wait-state = <0>;

					pl022,duplex = <0>;

					interrupts = <6 0x4>;

					interrupt-parent = <&gpio1>;

					irq-trigger = <0x2>;



					stmpe_touchscreen {

						compatible = "st,stmpe-ts";

						ts,sample-time = <4>;

						ts,mod-12b = <1>;

						ts,ref-sel = <0>;

						ts,adc-freq = <1>;

						ts,ave-ctrl = <1>;

						ts,touch-det-delay = <2>;

						ts,settling = <2>;

						ts,fraction-z = <7>;

						ts,i-drive = <1>;

					};

				};



				m25p80@1 {

					compatible = "st,m25p80";

					reg = <1>;

					spi-max-frequency = <12000000>;

					spi-cpol;

					spi-cpha;

					pl022,hierarchy = <0>;

					pl022,interface = <0>;

					pl022,slave-tx-disable;

					pl022,com-mode = <0x2>;

					pl022,rx-level-trig = <0>;

					pl022,tx-level-trig = <0>;

					pl022,ctrl-len = <0x11>;

					pl022,wait-state = <0>;

					pl022,duplex = <0>;

				};



				spidev@2 {

					compatible = "spidev";

					reg = <2>;

					spi-max-frequency = <25000000>;

					spi-cpha;

					pl022,hierarchy = <0>;

					pl022,interface = <0>;

					pl022,slave-tx-disable;

					pl022,com-mode = <0x2>;

					pl022,rx-level-trig = <0>;

					pl022,tx-level-trig = <0>;

					pl022,ctrl-len = <0x11>;

					pl022,wait-state = <0>;

					pl022,duplex = <0>;

				};

			};



			wdt@ec800620 {

arch/arm/boot/dts/spear1310.dtsi

+2 −0
Original line number Diff line number Diff line
@@ -160,6 +160,8 @@ 
				compatible = "arm,pl022", "arm,primecell";

				reg = <0x5d400000 0x1000>;

				interrupts = <0 99 0x4>;

				#address-cells = <1>;

				#size-cells = <0>;

				status = "disabled";

			};

arch/arm/boot/dts/spear1340-evb.dts

+163 −0
Original line number Diff line number Diff line
@@ -118,6 +118,10 @@ 
			};

		};



		ahci@b1000000 {

			status = "okay";

		};



		dma@ea800000 {

			status = "okay";

		};
@@ -205,10 +209,37 @@ 
			status = "okay";

		};



		gpio_keys {

			compatible = "gpio-keys";

			#address-cells = <1>;

			#size-cells = <0>;



			button@1 {

				label = "wakeup";

				linux,code = <0x100>;

				gpios = <&gpio1 1 0x4>;

				debounce-interval = <20>;

				gpio-key,wakeup = <1>;

			};

		};



		ehci@e5800000 {

			status = "okay";

		};



		i2s0: i2s-play@b2400000 {

			status = "okay";

		};



		i2s1: i2s-rec@b2000000 {

			status = "okay";

		};



		incodec: dir-hifi {

			compatible = "dummy,dir-hifi";

			status = "okay";

		};



		ohci@e4000000 {

			status = "okay";

		};
@@ -217,11 +248,43 @@ 
			status = "okay";

		};



		outcodec: dit-hifi {

			compatible = "dummy,dit-hifi";

			status = "okay";

		};



		sound {

			compatible = "spear,spear-evb";

			audio-controllers = <&spdif0 &spdif1 &i2s0 &i2s1>;

			audio-codecs = <&incodec &outcodec &sta529 &sta529>;

			codec_dai_name = "dir-hifi", "dit-hifi", "sta529-audio", "sta529-audio";

			stream_name = "spdif-cap", "spdif-play", "i2s-play", "i2s-cap";

			dai_name = "spdifin-pcm", "spdifout-pcm", "i2s0-pcm", "i2s1-pcm";

			nr_controllers = <4>;

		        status = "okay";

		};



		spdif0: spdif-in@d0100000 {

			status = "okay";

		};



		spdif1: spdif-out@d0000000 {

			status = "okay";

		};



		apb {

			adc@e0080000 {

				status = "okay";

			};



			i2s-play@b2400000 {

				status = "okay";

			};



			i2s-rec@b2000000 {

				status = "okay";

			};



			gpio0: gpio@e0600000 {

			       status = "okay";

			};
@@ -236,10 +299,36 @@ 


			i2c0: i2c@e0280000 {

			       status = "okay";



				sta529: sta529@1a {

					compatible = "st,sta529";

					reg = <0x1a>;

				};

			};



			i2c1: i2c@b4000000 {

			       status = "okay";



				eeprom0@56 {

					compatible = "st,eeprom";

					reg = <0x56>;

				};



				stmpe801@41 {

					compatible = "st,stmpe801";

					#address-cells = <1>;

					#size-cells = <0>;

					reg = <0x41>;

					interrupts = <4 0x4>;

					interrupt-parent = <&gpio0>;

					irq-trigger = <0x2>;



					stmpegpio: stmpe_gpio {

						compatible = "st,stmpe-gpio";

						gpio-controller;

						#gpio-cells = <2>;

					};

				};

			};



			kbd@e0300000 {
@@ -348,6 +437,80 @@ 


			spi0: spi@e0100000 {

				status = "okay";

				num-cs = <3>;

				cs-gpios = <&gpiopinctrl 80 0>, <&gpiopinctrl 24 0>,

					   <&gpiopinctrl 85 0>;



				m25p80@0 {

					compatible = "m25p80";

					reg = <0>;

					spi-max-frequency = <12000000>;

					spi-cpol;

					spi-cpha;

					pl022,hierarchy = <0>;

					pl022,interface = <0>;

					pl022,slave-tx-disable;

					pl022,com-mode = <0x2>;

					pl022,rx-level-trig = <0>;

					pl022,tx-level-trig = <0>;

					pl022,ctrl-len = <0x11>;

					pl022,wait-state = <0>;

					pl022,duplex = <0>;

				};



				stmpe610@1 {

					compatible = "st,stmpe610";

					spi-max-frequency = <1000000>;

					spi-cpha;

					reg = <1>;

					pl022,hierarchy = <0>;

					pl022,interface = <0>;

					pl022,slave-tx-disable;

					pl022,com-mode = <0>;

					pl022,rx-level-trig = <0>;

					pl022,tx-level-trig = <0>;

					pl022,ctrl-len = <0x7>;

					pl022,wait-state = <0>;

					pl022,duplex = <0>;

					interrupts = <100 0>;

					interrupt-parent = <&gpiopinctrl>;

					irq-trigger = <0x2>;

					#address-cells = <1>;

					#size-cells = <0>;



					stmpe_touchscreen {

						compatible = "st,stmpe-ts";

						ts,sample-time = <4>;

						ts,mod-12b = <1>;

						ts,ref-sel = <0>;

						ts,adc-freq = <1>;

						ts,ave-ctrl = <1>;

						ts,touch-det-delay = <2>;

						ts,settling = <2>;

						ts,fraction-z = <7>;

						ts,i-drive = <1>;

					};

				};



				spidev@2 {

					compatible = "spidev";

					reg = <2>;

					spi-max-frequency = <25000000>;

					spi-cpha;

					pl022,hierarchy = <0>;

					pl022,interface = <0>;

					pl022,slave-tx-disable;

					pl022,com-mode = <0x2>;

					pl022,rx-level-trig = <0>;

					pl022,tx-level-trig = <0>;

					pl022,ctrl-len = <0x11>;

					pl022,wait-state = <0>;

					pl022,duplex = <0>;

				};

			};



			timer@ec800600 {

				status = "okay";

			};



			wdt@ec800620 {

arch/arm/boot/dts/spear1340.dtsi

+46 −0
Original line number Diff line number Diff line
@@ -38,15 +38,61 @@ 
			status = "disabled";

		};



		i2s-play@b2400000 {

			compatible = "snps,designware-i2s";

			reg = <0xb2400000 0x10000>;

			interrupt-names = "play_irq";

			interrupts = <0 98 0x4

				      0 99 0x4>;

			play;

			channel = <8>;

			status = "disabled";

		};



		i2s-rec@b2000000 {

			compatible = "snps,designware-i2s";

			reg = <0xb2000000 0x10000>;

			interrupt-names = "record_irq";

			interrupts = <0 100  0x4

				      0 101 0x4>;

			record;

			channel = <8>;

			status = "disabled";

		};



		pinmux: pinmux@e0700000 {

			compatible = "st,spear1340-pinmux";

			reg = <0xe0700000 0x1000>;

			#gpio-range-cells = <2>;

		};



		pwm: pwm@e0180000 {

			compatible ="st,spear13xx-pwm";

			reg = <0xe0180000 0x1000>;

			#pwm-cells = <2>;

			status = "disabled";

		};



		spdif-in@d0100000 {

			compatible = "st,spdif-in";

			reg = < 0xd0100000 0x20000

				0xd0110000 0x10000 >;

			interrupts = <0 84 0x4>;

			status = "disabled";

		};



		spdif-out@d0000000 {

			compatible = "st,spdif-out";

			reg = <0xd0000000 0x20000>;

			interrupts = <0 85 0x4>;

			status = "disabled";

		};



		spi1: spi@5d400000 {

			compatible = "arm,pl022", "arm,primecell";

			reg = <0x5d400000 0x1000>;

			#address-cells = <1>;

			#size-cells = <0>;

			interrupts = <0 99 0x4>;

			status = "disabled";

		};

arch/arm/boot/dts/spear13xx.dtsi

+39 −0
Original line number Diff line number Diff line
@@ -64,6 +64,18 @@ 
		bootargs = "console=ttyAMA0,115200";

	};



	cpufreq {

		compatible = "st,cpufreq-spear";

		cpufreq_tbl = < 166000

				200000

				250000

				300000

				400000

				500000

				600000 >;

		status = "disable";

	};



	ahb {

		#address-cells = <1>;

		#size-cells = <1>;
@@ -128,6 +140,13 @@ 
			status = "disabled";

		};



		pcm {

			compatible = "st,pcm-audio";

			#address-cells = <0>;

			#size-cells = <0>;

			status = "disable";

		};



		smi: flash@ea000000 {

			compatible = "st,spear600-smi";

			#address-cells = <1>;
@@ -217,9 +236,29 @@ 
				status = "disabled";

			};



			i2s@e0180000 {

				compatible = "st,designware-i2s";

				reg = <0xe0180000 0x1000>;

				interrupt-names = "play_irq", "record_irq";

				interrupts = <0 10 0x4

					      0 11 0x4 >;

				status = "disabled";

			};



			i2s@e0200000 {

				compatible = "st,designware-i2s";

				reg = <0xe0200000 0x1000>;

				interrupt-names = "play_irq", "record_irq";

				interrupts = <0 26 0x4

					      0 53 0x4>;

				status = "disabled";

			};



			spi0: spi@e0100000 {

				compatible = "arm,pl022", "arm,primecell";

				reg = <0xe0100000 0x1000>;

				#address-cells = <1>;

				#size-cells = <0>;

				interrupts = <0 31 0x4>;

				status = "disabled";

			};