Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 7d6a399c authored by Laurent Pinchart's avatar Laurent Pinchart Committed by Simon Horman
Browse files

ARM: shmobile: koelsch: Remove legacy C board code 



All features supported by the Koelsch legacy C board code are now
supported by the multiplatform code, it's thus time to say bye to the
legacy code. Nobody should miss it.

Signed-off-by: default avatarLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
parent b6c461d2

arch/arm/configs/koelsch_defconfig

deleted100644 → 0
+0 −113
Original line number Diff line number Diff line 
CONFIG_SYSVIPC=y

CONFIG_NO_HZ=y

CONFIG_IKCONFIG=y

CONFIG_IKCONFIG_PROC=y

CONFIG_LOG_BUF_SHIFT=16

CONFIG_CC_OPTIMIZE_FOR_SIZE=y

CONFIG_SYSCTL_SYSCALL=y

CONFIG_EMBEDDED=y

CONFIG_PERF_EVENTS=y

CONFIG_SLAB=y

CONFIG_ARCH_SHMOBILE_LEGACY=y

CONFIG_ARCH_R8A7791=y

CONFIG_MACH_KOELSCH=y

# CONFIG_SWP_EMULATE is not set

CONFIG_CPU_BPREDICT_DISABLE=y

CONFIG_PL310_ERRATA_588369=y

CONFIG_ARM_ERRATA_754322=y

CONFIG_PCI=y

CONFIG_PCI_RCAR_GEN2=y

CONFIG_PCI_RCAR_GEN2_PCIE=y

CONFIG_SMP=y

CONFIG_SCHED_MC=y

CONFIG_NR_CPUS=8

CONFIG_AEABI=y

CONFIG_ZBOOT_ROM_TEXT=0x0

CONFIG_ZBOOT_ROM_BSS=0x0

CONFIG_ARM_APPENDED_DTB=y

CONFIG_KEXEC=y

CONFIG_AUTO_ZRELADDR=y

CONFIG_VFP=y

CONFIG_NEON=y

# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set

CONFIG_PM_RUNTIME=y

CONFIG_NET=y

CONFIG_PACKET=y

CONFIG_UNIX=y

CONFIG_INET=y

CONFIG_IP_PNP=y

CONFIG_IP_PNP_DHCP=y

CONFIG_DEVTMPFS=y

CONFIG_DEVTMPFS_MOUNT=y

CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"

CONFIG_BLK_DEV_SD=y

CONFIG_ATA=y

CONFIG_SATA_RCAR=y

CONFIG_MTD=y

CONFIG_MTD_M25P80=y

CONFIG_MTD_SPI_NOR=y

CONFIG_EEPROM_AT24=y

CONFIG_NETDEVICES=y

# CONFIG_NET_VENDOR_ARC is not set

# CONFIG_NET_CADENCE is not set

# CONFIG_NET_VENDOR_BROADCOM is not set

# CONFIG_NET_VENDOR_CIRRUS is not set

# CONFIG_NET_VENDOR_FARADAY is not set

# CONFIG_NET_VENDOR_INTEL is not set

# CONFIG_NET_VENDOR_MARVELL is not set

# CONFIG_NET_VENDOR_MICREL is not set

# CONFIG_NET_VENDOR_NATSEMI is not set

CONFIG_SH_ETH=y

# CONFIG_NET_VENDOR_SEEQ is not set

# CONFIG_NET_VENDOR_SMSC is not set

# CONFIG_NET_VENDOR_STMICRO is not set

# CONFIG_NET_VENDOR_VIA is not set

# CONFIG_NET_VENDOR_WIZNET is not set

# CONFIG_INPUT_MOUSEDEV_PSAUX is not set

CONFIG_KEYBOARD_GPIO=y

# CONFIG_INPUT_MOUSE is not set

# CONFIG_LEGACY_PTYS is not set

CONFIG_SERIAL_SH_SCI=y

CONFIG_SERIAL_SH_SCI_NR_UARTS=20

CONFIG_SERIAL_SH_SCI_CONSOLE=y

CONFIG_I2C=y

CONFIG_I2C_MUX=y

CONFIG_I2C_SH_MOBILE=y

CONFIG_I2C_RCAR=y

CONFIG_SPI=y

CONFIG_SPI_RSPI=y

CONFIG_SPI_SH_MSIOF=y

CONFIG_GPIOLIB=y

CONFIG_GPIO_RCAR=y

# CONFIG_HWMON is not set

CONFIG_THERMAL=y

CONFIG_RCAR_THERMAL=y

CONFIG_REGULATOR=y

CONFIG_REGULATOR_FIXED_VOLTAGE=y

CONFIG_REGULATOR_DA9210=y

CONFIG_REGULATOR_GPIO=y

CONFIG_MEDIA_SUPPORT=y

CONFIG_MEDIA_CAMERA_SUPPORT=y

CONFIG_V4L_PLATFORM_DRIVERS=y

CONFIG_SOC_CAMERA=y

CONFIG_SOC_CAMERA_PLATFORM=y

CONFIG_VIDEO_RCAR_VIN=y

# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set

CONFIG_VIDEO_ADV7180=y

# CONFIG_HID is not set

# CONFIG_USB_SUPPORT is not set

CONFIG_MMC=y

CONFIG_MMC_SDHI=y

CONFIG_NEW_LEDS=y

CONFIG_LEDS_CLASS=y

CONFIG_LEDS_GPIO=y

# CONFIG_IOMMU_SUPPORT is not set

# CONFIG_DNOTIFY is not set

CONFIG_TMPFS=y

CONFIG_CONFIGFS_FS=y

# CONFIG_MISC_FILESYSTEMS is not set

CONFIG_NFS_FS=y

CONFIG_ROOT_NFS=y

# CONFIG_ENABLE_WARN_DEPRECATED is not set

# CONFIG_ENABLE_MUST_CHECK is not set

# CONFIG_ARM_UNWIND is not set

arch/arm/mach-shmobile/Kconfig

+0 −6
Original line number Diff line number Diff line
@@ -227,12 +227,6 @@ config MACH_LAGER 
	select MICREL_PHY if SH_ETH

	select SND_SOC_AK4642 if SND_SIMPLE_CARD



config MACH_KOELSCH

	bool "Koelsch board"

	depends on ARCH_R8A7791

	select USE_OF

	select MICREL_PHY if SH_ETH



config MACH_KZM9G

	bool "KZM-A9-GT board"

	depends on ARCH_SH73A0

arch/arm/mach-shmobile/Makefile

+0 −1
Original line number Diff line number Diff line
@@ -69,7 +69,6 @@ obj-$(CONFIG_MACH_BOCKW_REFERENCE) += board-bockw-reference.o 
obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o

obj-$(CONFIG_MACH_LAGER)	+= board-lager.o

obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o

obj-$(CONFIG_MACH_KOELSCH)	+= board-koelsch.o

obj-$(CONFIG_MACH_KZM9G)	+= board-kzm9g.o

obj-$(CONFIG_MACH_KZM9G_REFERENCE)	+= board-kzm9g-reference.o

endif

arch/arm/mach-shmobile/board-koelsch.c

deleted100644 → 0
+0 −523
Original line number Diff line number Diff line 
/*

 * Koelsch board support

 *

 * Copyright (C) 2013  Renesas Electronics Corporation

 * Copyright (C) 2013-2014  Renesas Solutions Corp.

 * Copyright (C) 2013  Magnus Damm

 * Copyright (C) 2014  Cogent Embedded, Inc.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License as published by

 * the Free Software Foundation; version 2 of the License.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



#include <linux/dma-mapping.h>

#include <linux/gpio.h>

#include <linux/gpio_keys.h>

#include <linux/input.h>

#include <linux/irq.h>

#include <linux/kernel.h>

#include <linux/leds.h>

#include <linux/mfd/tmio.h>

#include <linux/mmc/host.h>

#include <linux/mmc/sh_mobile_sdhi.h>

#include <linux/mtd/mtd.h>

#include <linux/mtd/partitions.h>

#include <linux/phy.h>

#include <linux/pinctrl/machine.h>

#include <linux/platform_data/gpio-rcar.h>

#include <linux/platform_data/rcar-du.h>

#include <linux/platform_device.h>

#include <linux/regulator/driver.h>

#include <linux/regulator/fixed.h>

#include <linux/regulator/gpio-regulator.h>

#include <linux/regulator/machine.h>

#include <linux/sh_eth.h>

#include <linux/spi/flash.h>

#include <linux/spi/rspi.h>

#include <linux/spi/spi.h>



#include <asm/mach-types.h>

#include <asm/mach/arch.h>



#include "common.h"

#include "irqs.h"

#include "r8a7791.h"

#include "rcar-gen2.h"



/* DU */

static struct rcar_du_encoder_data koelsch_du_encoders[] = {

	{

		.type = RCAR_DU_ENCODER_NONE,

		.output = RCAR_DU_OUTPUT_LVDS0,

		.connector.lvds.panel = {

			.width_mm = 210,

			.height_mm = 158,

			.mode = {

				.pixelclock = 65000000,

				.hactive = 1024,

				.hfront_porch = 20,

				.hback_porch = 160,

				.hsync_len = 136,

				.vactive = 768,

				.vfront_porch = 3,

				.vback_porch = 29,

				.vsync_len = 6,

			},

		},

	},

};



static const struct rcar_du_platform_data koelsch_du_pdata __initconst = {

	.encoders = koelsch_du_encoders,

	.num_encoders = ARRAY_SIZE(koelsch_du_encoders),

};



static const struct resource du_resources[] __initconst = {

	DEFINE_RES_MEM(0xfeb00000, 0x40000),

	DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),

	DEFINE_RES_IRQ(gic_spi(256)),

	DEFINE_RES_IRQ(gic_spi(268)),

};



static void __init koelsch_add_du_device(void)

{

	struct platform_device_info info = {

		.name = "rcar-du-r8a7791",

		.id = -1,

		.res = du_resources,

		.num_res = ARRAY_SIZE(du_resources),

		.data = &koelsch_du_pdata,

		.size_data = sizeof(koelsch_du_pdata),

		.dma_mask = DMA_BIT_MASK(32),

	};



	platform_device_register_full(&info);

}



/* Ether */

static const struct sh_eth_plat_data ether_pdata __initconst = {

	.phy			= 0x1,

	.phy_irq		= irq_pin(0),

	.edmac_endian		= EDMAC_LITTLE_ENDIAN,

	.phy_interface		= PHY_INTERFACE_MODE_RMII,

	.ether_link_active_low	= 1,

};



static const struct resource ether_resources[] __initconst = {

	DEFINE_RES_MEM(0xee700000, 0x400),

	DEFINE_RES_IRQ(gic_spi(162)),

};



static const struct platform_device_info ether_info __initconst = {

	.name		= "r8a7791-ether",

	.id		= -1,

	.res		= ether_resources,

	.num_res	= ARRAY_SIZE(ether_resources),

	.data		= &ether_pdata,

	.size_data	= sizeof(ether_pdata),

	.dma_mask	= DMA_BIT_MASK(32),

};



/* LEDS */

static struct gpio_led koelsch_leds[] = {

	{

		.name		= "led8",

		.gpio		= RCAR_GP_PIN(2, 21),

		.default_state	= LEDS_GPIO_DEFSTATE_ON,

	}, {

		.name		= "led7",

		.gpio		= RCAR_GP_PIN(2, 20),

		.default_state	= LEDS_GPIO_DEFSTATE_ON,

	}, {

		.name		= "led6",

		.gpio		= RCAR_GP_PIN(2, 19),

		.default_state	= LEDS_GPIO_DEFSTATE_ON,

	},

};



static const struct gpio_led_platform_data koelsch_leds_pdata __initconst = {

	.leds		= koelsch_leds,

	.num_leds	= ARRAY_SIZE(koelsch_leds),

};



/* GPIO KEY */

#define GPIO_KEY(c, g, d, ...) \

	{ .code = c, .gpio = g, .desc = d, .active_low = 1, \

	  .wakeup = 1, .debounce_interval = 20 }



static struct gpio_keys_button gpio_buttons[] = {

	GPIO_KEY(KEY_4,		RCAR_GP_PIN(5, 3),	"SW2-pin4"),

	GPIO_KEY(KEY_3,		RCAR_GP_PIN(5, 2),	"SW2-pin3"),

	GPIO_KEY(KEY_2,		RCAR_GP_PIN(5, 1),	"SW2-pin2"),

	GPIO_KEY(KEY_1,		RCAR_GP_PIN(5, 0),	"SW2-pin1"),

	GPIO_KEY(KEY_G,		RCAR_GP_PIN(7, 6),	"SW36"),

	GPIO_KEY(KEY_F,		RCAR_GP_PIN(7, 5),	"SW35"),

	GPIO_KEY(KEY_E,		RCAR_GP_PIN(7, 4),	"SW34"),

	GPIO_KEY(KEY_D,		RCAR_GP_PIN(7, 3),	"SW33"),

	GPIO_KEY(KEY_C,		RCAR_GP_PIN(7, 2),	"SW32"),

	GPIO_KEY(KEY_B,		RCAR_GP_PIN(7, 1),	"SW31"),

	GPIO_KEY(KEY_A,		RCAR_GP_PIN(7, 0),	"SW30"),

};



static const struct gpio_keys_platform_data koelsch_keys_pdata __initconst = {

	.buttons	= gpio_buttons,

	.nbuttons	= ARRAY_SIZE(gpio_buttons),

};



/* QSPI */

static const struct resource qspi_resources[] __initconst = {

	DEFINE_RES_MEM(0xe6b10000, 0x1000),

	DEFINE_RES_IRQ_NAMED(gic_spi(184), "mux"),

};



static const struct rspi_plat_data qspi_pdata __initconst = {

	.num_chipselect = 1,

};



/* SPI Flash memory (Spansion S25FL512SAGMFIG11 64 MiB) */

static struct mtd_partition spi_flash_part[] = {

	{

		.name		= "loader",

		.offset		= 0x00000000,

		.size		= 512 * 1024,

		.mask_flags	= MTD_WRITEABLE,

	},

	{

		.name		= "bootenv",

		.offset		= MTDPART_OFS_APPEND,

		.size		= 512 * 1024,

		.mask_flags	= MTD_WRITEABLE,

	},

	{

		.name		= "data",

		.offset		= MTDPART_OFS_APPEND,

		.size		= MTDPART_SIZ_FULL,

	},

};



static const struct flash_platform_data spi_flash_data = {

	.name		= "m25p80",

	.parts		= spi_flash_part,

	.nr_parts	= ARRAY_SIZE(spi_flash_part),

	.type		= "s25fl512s",

};



static const struct spi_board_info spi_info[] __initconst = {

	{

		.modalias	= "m25p80",

		.platform_data	= &spi_flash_data,

		.mode		= SPI_MODE_0 | SPI_TX_QUAD | SPI_RX_QUAD,

		.max_speed_hz	= 30000000,

		.bus_num	= 0,

		.chip_select	= 0,

	},

};



/* SATA0 */

static const struct resource sata0_resources[] __initconst = {

	DEFINE_RES_MEM(0xee300000, 0x2000),

	DEFINE_RES_IRQ(gic_spi(105)),

};



static const struct platform_device_info sata0_info __initconst = {

	.name		= "sata-r8a7791",

	.id		= 0,

	.res		= sata0_resources,

	.num_res	= ARRAY_SIZE(sata0_resources),

	.dma_mask	= DMA_BIT_MASK(32),

};



/* I2C */

static const struct resource i2c_resources[] __initconst = {

	/* I2C0 */

	DEFINE_RES_MEM(0xE6508000, 0x40),

	DEFINE_RES_IRQ(gic_spi(287)),

	/* I2C1 */

	DEFINE_RES_MEM(0xE6518000, 0x40),

	DEFINE_RES_IRQ(gic_spi(288)),

	/* I2C2 */

	DEFINE_RES_MEM(0xE6530000, 0x40),

	DEFINE_RES_IRQ(gic_spi(286)),

	/* I2C3 */

	DEFINE_RES_MEM(0xE6540000, 0x40),

	DEFINE_RES_IRQ(gic_spi(290)),

	/* I2C4 */

	DEFINE_RES_MEM(0xE6520000, 0x40),

	DEFINE_RES_IRQ(gic_spi(19)),

	/* I2C5 */

	DEFINE_RES_MEM(0xE6528000, 0x40),

	DEFINE_RES_IRQ(gic_spi(20)),

};



static void __init koelsch_add_i2c(unsigned idx)

{

	unsigned res_idx = idx * 2;



	BUG_ON(res_idx >= ARRAY_SIZE(i2c_resources));



	platform_device_register_simple("i2c-rcar_gen2", idx,

					i2c_resources + res_idx, 2);

}



#define SDHI_REGULATOR(idx, vdd_pin, vccq_pin)				\

static struct regulator_consumer_supply vcc_sdhi##idx##_consumer =	\

	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi." #idx);		\

									\

static struct regulator_init_data vcc_sdhi##idx##_init_data = {		\

	.constraints = {						\

		.valid_ops_mask = REGULATOR_CHANGE_STATUS,		\

	},								\

	.consumer_supplies	= &vcc_sdhi##idx##_consumer,		\

	.num_consumer_supplies	= 1,					\

};									\

									\

static const struct fixed_voltage_config vcc_sdhi##idx##_info __initconst = {\

	.supply_name	= "SDHI" #idx "Vcc",				\

	.microvolts	= 3300000,					\

	.gpio		= vdd_pin,					\

	.enable_high	= 1,						\

	.init_data	= &vcc_sdhi##idx##_init_data,			\

};									\

									\

static struct regulator_consumer_supply vccq_sdhi##idx##_consumer =	\

	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi." #idx);		\

									\

static struct regulator_init_data vccq_sdhi##idx##_init_data = {	\

	.constraints = {						\

		.input_uV	= 3300000,				\

		.min_uV		= 1800000,				\

		.max_uV		= 3300000,				\

		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |		\

				  REGULATOR_CHANGE_STATUS,		\

	},								\

	.consumer_supplies	= &vccq_sdhi##idx##_consumer,		\

	.num_consumer_supplies	= 1,					\

};									\

									\

static struct gpio vccq_sdhi##idx##_gpio =				\

	{ vccq_pin, GPIOF_OUT_INIT_HIGH, "vccq-sdhi" #idx };		\

									\

static struct gpio_regulator_state vccq_sdhi##idx##_states[] = {	\

	{ .value = 1800000, .gpios = 0 },				\

	{ .value = 3300000, .gpios = 1 },				\

};									\

									\

static const struct gpio_regulator_config vccq_sdhi##idx##_info __initconst = {\

	.supply_name	= "vqmmc",					\

	.gpios		= &vccq_sdhi##idx##_gpio,			\

	.nr_gpios	= 1,						\

	.states		= vccq_sdhi##idx##_states,			\

	.nr_states	= ARRAY_SIZE(vccq_sdhi##idx##_states),		\

	.type		= REGULATOR_VOLTAGE,				\

	.init_data	= &vccq_sdhi##idx##_init_data,			\

};



SDHI_REGULATOR(0, RCAR_GP_PIN(7, 17), RCAR_GP_PIN(2, 12));

SDHI_REGULATOR(1, RCAR_GP_PIN(7, 18), RCAR_GP_PIN(2, 13));

SDHI_REGULATOR(2, RCAR_GP_PIN(7, 19), RCAR_GP_PIN(2, 26));



/* SDHI0 */

static struct sh_mobile_sdhi_info sdhi0_info __initdata = {

	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |

			  MMC_CAP_POWER_OFF_CARD,

	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,

};



static struct resource sdhi0_resources[] __initdata = {

	DEFINE_RES_MEM(0xee100000, 0x200),

	DEFINE_RES_IRQ(gic_spi(165)),

};



/* SDHI1 */

static struct sh_mobile_sdhi_info sdhi1_info __initdata = {

	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |

			  MMC_CAP_POWER_OFF_CARD,

	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,

};



static struct resource sdhi1_resources[] __initdata = {

	DEFINE_RES_MEM(0xee140000, 0x100),

	DEFINE_RES_IRQ(gic_spi(167)),

};



/* SDHI2 */

static struct sh_mobile_sdhi_info sdhi2_info __initdata = {

	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |

			  MMC_CAP_POWER_OFF_CARD,

	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT |

			  TMIO_MMC_WRPROTECT_DISABLE,

};



static struct resource sdhi2_resources[] __initdata = {

	DEFINE_RES_MEM(0xee160000, 0x100),

	DEFINE_RES_IRQ(gic_spi(168)),

};



static const struct pinctrl_map koelsch_pinctrl_map[] = {

	/* DU */

	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",

				  "du_rgb666", "du"),

	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",

				  "du_sync", "du"),

	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",

				  "du_clk_out_0", "du"),

	/* Ether */

	PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",

				  "eth_link", "eth"),

	PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",

				  "eth_mdio", "eth"),

	PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",

				  "eth_rmii", "eth"),

	PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",

				  "intc_irq0", "intc"),

	/* QSPI */

	PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7791",

				  "qspi_ctrl", "qspi"),

	PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7791",

				  "qspi_data4", "qspi"),

	/* SCIF0 (CN19: DEBUG SERIAL0) */

	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7791",

				  "scif0_data_d", "scif0"),

	/* SCIF1 (CN20: DEBUG SERIAL1) */

	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7791",

				  "scif1_data_d", "scif1"),

	/* I2C1 */

	PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar_gen2.1", "pfc-r8a7791",

				  "i2c1_e", "i2c1"),

	/* I2C2 */

	PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar_gen2.2", "pfc-r8a7791",

				  "i2c2", "i2c2"),

	/* I2C4 */

	PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar_gen2.4", "pfc-r8a7791",

				  "i2c4_c", "i2c4"),

	/* SDHI0 */

	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791",

				  "sdhi0_data4", "sdhi0"),

	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791",

				  "sdhi0_ctrl", "sdhi0"),

	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791",

				  "sdhi0_cd", "sdhi0"),

	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791",

				  "sdhi0_wp", "sdhi0"),

	/* SDHI2 */

	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791",

				  "sdhi1_data4", "sdhi1"),

	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791",

				  "sdhi1_ctrl", "sdhi1"),

	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791",

				  "sdhi1_cd", "sdhi1"),

	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791",

				  "sdhi1_wp", "sdhi1"),

	/* SDHI2 */

	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7791",

				  "sdhi2_data4", "sdhi2"),

	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7791",

				  "sdhi2_ctrl", "sdhi2"),

	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7791",

				  "sdhi2_cd", "sdhi2"),

};



static void __init koelsch_add_standard_devices(void)

{

	r8a7791_clock_init();

	pinctrl_register_mappings(koelsch_pinctrl_map,

				  ARRAY_SIZE(koelsch_pinctrl_map));

	r8a7791_pinmux_init();

	r8a7791_add_standard_devices();

	platform_device_register_full(&ether_info);

	platform_device_register_data(NULL, "leds-gpio", -1,

				      &koelsch_leds_pdata,

				      sizeof(koelsch_leds_pdata));

	platform_device_register_data(NULL, "gpio-keys", -1,

				      &koelsch_keys_pdata,

				      sizeof(koelsch_keys_pdata));

	platform_device_register_resndata(NULL, "qspi", 0,

					  qspi_resources,

					  ARRAY_SIZE(qspi_resources),

					  &qspi_pdata, sizeof(qspi_pdata));

	spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));



	koelsch_add_du_device();



	platform_device_register_full(&sata0_info);



	koelsch_add_i2c(1);

	koelsch_add_i2c(2);

	koelsch_add_i2c(4);

	koelsch_add_i2c(5);



	platform_device_register_data(NULL, "reg-fixed-voltage", 0,

				      &vcc_sdhi0_info, sizeof(struct fixed_voltage_config));

	platform_device_register_data(NULL, "reg-fixed-voltage", 1,

				      &vcc_sdhi1_info, sizeof(struct fixed_voltage_config));

	platform_device_register_data(NULL, "reg-fixed-voltage", 2,

				      &vcc_sdhi2_info, sizeof(struct fixed_voltage_config));

	platform_device_register_data(NULL, "gpio-regulator", 0,

				      &vccq_sdhi0_info, sizeof(struct gpio_regulator_config));

	platform_device_register_data(NULL, "gpio-regulator", 1,

				      &vccq_sdhi1_info, sizeof(struct gpio_regulator_config));

	platform_device_register_data(NULL, "gpio-regulator", 2,

				      &vccq_sdhi2_info, sizeof(struct gpio_regulator_config));



	platform_device_register_resndata(NULL, "sh_mobile_sdhi", 0,

					  sdhi0_resources, ARRAY_SIZE(sdhi0_resources),

					  &sdhi0_info, sizeof(struct sh_mobile_sdhi_info));



	platform_device_register_resndata(NULL, "sh_mobile_sdhi", 1,

					  sdhi1_resources, ARRAY_SIZE(sdhi1_resources),

					  &sdhi1_info, sizeof(struct sh_mobile_sdhi_info));



	platform_device_register_resndata(NULL, "sh_mobile_sdhi", 2,

					  sdhi2_resources, ARRAY_SIZE(sdhi2_resources),

					  &sdhi2_info, sizeof(struct sh_mobile_sdhi_info));



}



/*

 * Ether LEDs on the Koelsch board are named LINK and ACTIVE which corresponds

 * to non-default 01 setting of the Micrel KSZ8041 PHY control register 1 bits

 * 14-15. We have to set them back to 01 from the default 00 value each time

 * the PHY is reset. It's also important because the PHY's LED0 signal is

 * connected to SoC's ETH_LINK signal and in the PHY's default mode it will

 * bounce on and off after each packet, which we apparently want to avoid.

 */

static int koelsch_ksz8041_fixup(struct phy_device *phydev)

{

	u16 phyctrl1 = phy_read(phydev, 0x1e);



	phyctrl1 &= ~0xc000;

	phyctrl1 |= 0x4000;

	return phy_write(phydev, 0x1e, phyctrl1);

}



static void __init koelsch_init(void)

{

	koelsch_add_standard_devices();



	irq_set_irq_type(irq_pin(0), IRQ_TYPE_LEVEL_LOW);



	if (IS_ENABLED(CONFIG_PHYLIB))

		phy_register_fixup_for_id("r8a7791-ether-ff:01",

					  koelsch_ksz8041_fixup);

}



static const char * const koelsch_boards_compat_dt[] __initconst = {

	"renesas,koelsch",

	NULL,

};



DT_MACHINE_START(KOELSCH_DT, "koelsch")

	.smp		= smp_ops(r8a7791_smp_ops),

	.init_early	= shmobile_init_delay,

	.init_time	= rcar_gen2_timer_init,

	.init_machine	= koelsch_init,

	.init_late	= shmobile_init_late,

	.reserve	= rcar_gen2_reserve,

	.dt_compat	= koelsch_boards_compat_dt,

MACHINE_END